Question about 1994 Saturn Sl

1 Answer

1994 sl-rear window defogger won't work. replaced switch and now

Light comes on and relay pulls in but it won't stay on?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Saturn Master
  • 14,036 Answers

Check fuse relay and the control switch .

Posted on Apr 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Which fuse box on the 2011 Chevy Malibu is the fuse for the rear defrost


Fuse box rear , fuse #23 30 amp ! Do you know where this is located ? There is also a relay for the Rear window defogger , located in the same rear fuse box .
Fuse Block - Rear
Left side of the luggage compartment, behind the left rear wheel well . But you really need to know how it works , you can check fuse an relay .
Rear Window Defogger Operation
Battery positive voltage is supplied through the BATT 1 fuse in the underhood fuse block to the rear defog relay switched input. When the rear defog switch button is pressed, the body control module (BCM) energizes the rear defog relay by providing a B+ to the control circuit of the rear defog relay. This allows battery positive voltage from the relay switched input through the switch contacts and out the relay switched output to the rear window defogger grid. The HVAC control module houses the rear defog switch and also illuminates the rear defog indicator on the switch button, upon this request. Ground for the rear window defogger grid is provided by G301 for the Sedan or G302 For the Extended Sedan.

Nov 23, 2016 | 2011 Chevrolet Malibu

1 Answer

Wiring diagram for rear window defogger 2005 silverado from dash to deffoger


Rear Window Defogger System Components
The rear window defogger system consist of the following components:
• HVAC control module
• Body control module (BCM)
• DEFOG relay
• Rear window defogger grid
Rear Window Defogger Operation
When you turn the ignition to the ON position, ignition voltage is supplied to the DEFOG relay coil. Battery positive voltage is supplied at all times to the DEFOG relay switched input. When the rear window defogger switch is depressed, the HVAC control module illuminates the rear window defogger indicator and sends a class 2 message to the BCM. The BCM energizes the DEFOG relay by grounding the control circuit of the relay. This allows battery positive voltage from the relay switched input through the switch contacts and out the relay switched output to the rear window defogger. Ground for the rear window defogger is provided by G306 or G390 (crew cab).
When you turn ON the ignition and press the rear window defogger switch for the first time, the defogger cycle lasts 10 minutes. Further operation results in 5 minute defogger cycles.

Do you know what your messing with ? What's the problem ?

Oct 30, 2016 | Cars & Trucks

1 Answer

My heater only works some of the time and my rear defrost dont work what could be the problem


As by heat only works some of the time , you mean it doesn't blow air out of the vent's . This means you probably have a problem with the blower motor or blower motor resistor or blower motor relay .
Rear Window Defogger Inoperative

    Exchange the rear defogger relay with a known good relay from the under hood junction block.
  1. Turn the ignition switch to the ON position.
  2. Press the rear defogger switch to the ON position.
Does the rear defogger grid warm?
--
Yes Go to Step 2
NO Go to Step 3

2

Replace the faulty relay.
Is the repair complete?
Go to Defogger System Check --

3

  1. Use a fused jumper wire in order to backprobe between terminal A4 of underhood junction block connector C3 and ground.
  2. Use a test lamp in order to backprobe between terminal C5 of underhood junction block connector C3 and ground.
Does the test lamp light?
--
Go to Step 4
Go to Step 23

4

  1. Use a test lamp in order to backprobe between terminal C5 of underhood junction block connector C3 and ground.
  2. Press the rear defogger switch to the ON position.
Does the test lamp light?
--
Go to Step 5
Go to Step 14



Mar 23, 2016 | 1999 Oldsmobile Alero

2 Answers

Why is my rear defrost not working


Switch, fuse or maybe the wiring to the window has come loose or off, happens alot, kits are available at local auto parts stores...
I hope that helps...

Mar 02, 2015 | 2008 Chevrolet Malibu

1 Answer

Power windows, rear defogger and exterior mirror defogger quit working


IF you checked the fuses and relays, them it sound like it might be wiring or wiring connector might be loose.

Jan 05, 2013 | 1994 Isuzu Trooper

1 Answer

My rear window defogger won't defog. I pushed the button and the light comes on but it still won't work. I checked the fuses, and replaced the relay but it still won't work. I thought maybe I need to...


check the supply that goes into the rear screen. that connector must have power when switch is "on". if got power, you need to change the window.....

Nov 23, 2010 | 2005 Chevrolet Impala

1 Answer

1998 buick park ave. rear window defroster not working. fuse is good, has anyone replaced the black box located next to rear window where element plugs into along with the antenna. element on window is not...


Rear Defogger Inoperative, But Heated Mirrors Operate Correctly
1. Connect scan tool. Turn ignition switch to RUN position. Turn rear defogger on. Using scan tool, display BCM
outputs. If rear defogger is being requested on, go to next step. If rear defogger is not being requested on, go to
step 10).
2. Ensure ignition switch is in RUN position. Remove rear defogger relay from rear junction block, located on center
right rear of passenger compartment, under rear seat. Connect test light between ground and defogger relay
harness connector terminal F3 (Brown wire). If test light illuminates, go to next step. If test light does not
illuminate, go to step 11).
3. Connect test light between ground and defogger relay harness connector terminal A2 (Red wire). If test light
illuminates, go to next step. If test light does not illuminate, go to step 12).
4. Connect test light between defogger relay harness connector terminals A2 (Red wire) and B3 (Purple wire). If test
light illuminates, go to step 13). If light does not illuminate, go to next step.
5. Disconnect rear defogger positive and negative feed bus connectors. Connect a jumper wire between defogger
relay harness connector terminals F3 (Brown wire) and A4 (White wire). Connect test light between ground and
positive feed bus connector terminal "A" (Black wire). If test light illuminates, go to next step. If test light does not
illuminate, go to step 8).
6. Connect test light between positive feed bus connector terminal "A" (Black wire) and negative feed bus connector
terminal "B" (Black wire). If test light illuminates, go to next step. If test light does not illuminate, go to step 9).
7. Repair open in Black wire between rear defogger and ground. Recheck system operation.
8. Repair open in Purple wire between rear junction block and heated backlight antenna module. Recheck system
operation.
9. Check for proper terminal contact at rear defogger connectors. Repair as necessary. Recheck system operation.
10. Check for proper terminal contact at BCM. If terminal contact is okay, replace BCM. Recheck system operation.
11. Repair open in Brown wire between rear junction block and instrument panel junction block. Recheck system
operation.
12. Repair open in Red wire between rear junction block and underhood junction block (located in right front corner of
engine compartment, between battery and strut tower). Recheck system operation.
13. Connect test light between defogger relay harness connector terminals F3 (Brown wire) and A4 (White wire). If
test light illuminates, go to next step. If test light does not illuminate, go to step 16).
14. Reinstall defogger relay. Disconnect BCM 32-pin Pink connector C2. BCM is located behind right side of instrument
panel, near rear of glove box. Using DVOM, check voltage between ground and BCM harness connector C2
terminal A3 (White wire). If any voltage is present, go to next step. If no voltage is present, go to step 17).
15. Repair open or short to ground in White wire between rear junction block and BCM. Recheck system operation.
16. Check for poor connection at defogger relay terminals. If connections are okay, replace defogger relay. Recheck
system operation.
17. Check for proper terminal contact at BCM. If terminal contact is okay, replace BCM. Recheck system operation.

Feb 25, 2010 | 1998 Buick Park Avenue

1 Answer

Rear window defogger dont work replaced relay & fuse still dont work


REAR WINDOW DEFOGGER SWITCH IS BAD OR YOUR REAR WINDOW HAS A BROKEN PLACE IN THE GRID.

Nov 01, 2009 | 1999 Oldsmobile Alero

1 Answer

Rear window defogger on 1997 SW2 won't work in damp, wet weather


sounds like a short. i would check and see if there is any breaks in the defroster lines in the glass. maybe you have a bad connection

Oct 22, 2009 | 1997 Saturn SL

1 Answer

2003 olds alero rear windoe defogger


the rear passager panel the one that cover the side rear window there a relay connector in there that were the power to window go that defectif that gonna FIXYA our post thank you pierre

Jul 06, 2008 | 2003 Oldsmobile Alero

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...