Question about 1999 Chevrolet Blazer

1 Answer

Replace the bulb in a 95 Blazer 4WD switch on the dash

The light does not come on my 95 Chevy blazer when it is in 2WD. I bought a bulb but don't know how to change it. Any help much appreciated Vince

Posted by on

  • 1 more comment 
  • Anonymous Dec 30, 2008

    The 2wd light does not come on. I bought a bulb and can't figure out how to install it. Thanks for any help.

  • Vincent Bozzone
    Vincent Bozzone Jan 03, 2009

    Thanks. Worked like a charm. The bulb for the 2Hi is dim however and I made a tube out of paper to put over the bulb to get the light to the frong ot the switch. It didn't help much. You can see it at night but not so well in the daytime.

  • Joe Smith Feb 14, 2009

    I have the same issue, can you please tell me where you purchased the replacment bulb. I do not want to buy the entire switch, I just need the bulb.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

The square box that all 3 lights are held in by can be taken out, just pry it on the top or bottom with a flat head screw driver, once you get it out you should see the wires that connect to the buttons,there are four tabs, 2 on each side, that you can just push in and the back panel should come off, it will look like a circuit board. twist the light bulb left or right and you should see how it comes out, just replace the bulb, and put back in and twist. should only have to twist 1/4 of a turn. snap everything back in place and it should be working. hope this helps.

Posted on Jan 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 chevy blazer. Do I drive it in 2wd, 4wd hi or low what is the difference and can it do damage?


always drive in 2wd only use 4wd when traction could be a problem and 4wheel low when stuck or off road use

May 25, 2012 | 1998 Chevrolet Blazer

1 Answer

I recently purchased a 1999 Chevy Blazer 4WD LT with the 4WD AUTO 4 switch push button. We picked it up cheap. We now know why... 4WD dash switch is dead, changed it with a used one lights flash and n


Sounds like the encoder switch is bad ..it on the transfer case .it has a motor with wires going to it.when you press the button it sends a signal to that motor to switch into a certain gear..

Apr 21, 2012 | Cars & Trucks

1 Answer

Hi my name is chris i have a 2001 chevy blazer 4x4 for so reason it keeps putting itself into 4x4 when i stop at a light or stop sign and won''t let me put it back into 2 wheel drive ?


There's been a lot of problems with the 4wd systems on the blazers of that vintage. The only sure way to track down the cause is to have the system scanned. Some of the most commom causes are: the switch in the dash, - the control module, - the transfer case . There are other issues if it has auto 4wd as the ABS system is tied into that system to activate it when the sensors sense wheel slippage. If your blazer has the auto 4wd funtion and has a ABS light on, it could be in the ABS system.
IF you could get it back into 2wd, you could pull the fuse to the 4wd to dis-able untill you have a chance to have it scanned.

Jun 24, 2011 | 2001 Chevrolet Blazer

2 Answers

95 chevy blaver is stuck in 4wd. When i push the 2wd button i hear a clicking sound. How can i get my truck back to 2wd


SOUND LIKE PROBLEM IS IN TRANSFER CASE SWITCH OR THE TRANSFER SHIFT CONTROL MODULE.IN THE MIDDLE OF THE DASH.IT CONTROLS SHIFT MOTOR FROM 2WD TO 4WD.ALSO CHECK SHIFT ROD AND CABLE FOR BINDING AND DAMAGE.

Jun 27, 2010 | 1995 Chevrolet Blazer

2 Answers

I have a 1996 chevy blazer and dont know how to disengage from four wheel drive to two wheel drive?


As I recall the 96 blazer had electronic shifting for 2wd to 4wd. There should be a small panel on the drivers dash buttons for 2wd, 4wd lo and 4wd hi.

Simply press the desired button while stationary and if the system is functioning properly then it will shift and the light for the engaged type of drive will be lighted. Generally you would like to be in 2wd for this vehicle.

Mar 10, 2010 | 1996 Chevrolet Blazer

1 Answer

03 Chevy Tahoe Z71 - 4wd not functioning


my son has one and his did that and it was a fuse he put a new one in and it is working good now

Jan 14, 2009 | 1999 Chevrolet Blazer

1 Answer

95 chevy blazer has dash lights intensity varying while driving


This is not a voltage problem. The problem is in the headlight/dash dimmer. You have to turn the dimmer switch on the headlight switch to select what intensity you have right? try turning it down just a smidge and if it stays steady then it is most likely a dimmer switch problem. This requires replacement of the headlight/dimmer switch to fix. local auto parts shop should be able to have this in stock.
ps dont forget to rate my solution please. Thanks

Dec 27, 2008 | 1995 Chevrolet Blazer

Not finding what you are looking for?
1999 Chevrolet Blazer Logo

300 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...