Question about 2002 GMC Yukon XL

2 Answers

Replace factory radio on 2002 yukon xl

Im looking for detailed instructions or diagrams on how to remove factory cd radio on 2002 yukon xl. Anyone out there that can help? Thanks.

Posted by on

  • Anonymous Mar 14, 2014

    how to change fluid in yukon 2002 xl 6.0

  • Anonymous Mar 23, 2014

    I have a 2002 Yukon XL. The transmission started slipping in all gears. Restarting the Yukon temporarily resolves the problem.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

All you gotta do is carfully pry the dash panel off (prying from the far left end is easiest) completely remove panel. then there are 2 clips that hold the factory sterio in place. push on the both clips while pulling the radio out. simply disconnect the wiring harness from the back of the radio. using an adapter avaliable at your local radio shop (scosche p/n gm02, mdarb and gm1483b) wiring harness, dash install kit, and antenna adapter. then simply match the colors on the new radio's harness to the adapter harness, crimping each connection with a "but plug". then simply follow the instructions included with the dash install kit to assemble the kit.connect the antenna adapter to radio, plug in all cables. test to see if everything works properly before the final install. install sterio into dash install kit, re installing kit where origional radio was. then simply put the panel back in its place by firmly pushing on it untill it snaps into place. then enjoy your new radio!

Posted on Jan 04, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I think theres more to that, I had to take mine Yukonto stereo shop were one the worksthere moved or flipped a switch on, because the musicwouldnot play outta the speakers

Posted on Mar 13, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you remove the heater core on a 2002 gmc yukon xl 1500 sle?


Check this site out...http://www.tomanual.com/search/2002-gmc-yukon-heater-core-diagram

Sep 01, 2014 | Cars & Trucks

1 Answer

Instuctions on how to remove and replace bearings on 2002 GMC Yukon XL


go to www. automecanico.com and download your instruction or www.howstuffingcarworks.com

God bless you

Jun 19, 2012 | 2002 GMC Yukon XL

1 Answer

Im trying to hook up a 2002 yukon power seat to a new 2005 yukon seat ,but the harness is diff. is there a adapter. Thanks


BEST TO USE 2005 YUKON ORIGINAL SEAT I WOULD NOT USE OLD MODEL TYPE WIRING WILL BE DIFFERENT.

Oct 30, 2011 | 2002 GMC Yukon XL

1 Answer

Just changed radio on my 01 Yukon XL and now the speedometer doesn't work


Double check your wiring on the radio. The factory radio has a wire that comes from the vehicle speed sensor. When you speed up, the radio gets louder. When you slow down the radio gets quieter. That wire may go into the radio and then to the speedo depending on how the vehicle is wired. You may have to connect that wire to another (check wiring diagram). Another thought is that you accidentally hooked that wire up to something wrong and it blew a fuse. Good luck

Feb 11, 2010 | 2001 GMC Yukon XL

1 Answer

How do you remove factory stereo amplifier on 2001 Yukon XL


There is an outer trim that circumferences the Dash and radio panels. This trim is a snap in. I pulled mine out by hand. After pulling the trim loose I had to lower the steering column all the way and put the car in drive to easily remove the loosened trim.

Dec 20, 2009 | 2001 GMC Yukon XL

1 Answer

Do you have a pdf showing howt to remove the radio on a 2002 yukon xl


this very simply have done it many times. the trim that goes around the whole drivers cluster, rado, and HVAC controls pulls off straight towards the rear of the vehicle, use a upohlestry tool or carfully with a screwdriver, it comes off, you may have to move the tilt steering down and shift the gear slector to low range when you remove it (makes it easier) PARKING BRAKE ON WHILE DOING THIS. This exposes the radio and there should be four 7mm hex head screws, remove those, then pull the radio straight out, undo the connectors and radio antenna.

Oct 02, 2009 | 2002 GMC Yukon XL

1 Answer

Air filter


There should be a panel under the glove box with a few screws. Remove the panel and replace the filters.

Nov 15, 2008 | 2002 GMC Yukon XL

1 Answer

No volume from radio


way different vehicle then i own but when i blew the fuse on the factory amp i had no sound.... have a look at your fuse panel.

Robert

Aug 31, 2008 | 2003 GMC Yukon XL

Not finding what you are looking for?
2002 GMC Yukon XL Logo

2,516 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...