will it go on 3 gear or and other gears? have it been slipping previously?
Same Problem
Feb 06, 2009
-   I have a 2004 Dodge Stratus and have the same problem. While driving to work i heard a pop and the call would not drive forward. I had to drive a mile home in reverse. -   tanya702
Jan 09, 2009
-   I Have a 2002 chevy blazer and I have to put it into 1st or 2nd gear and drive 10 mph and then i can shift into 3rd or in drive and if i dont and put it in drive or 3rd it reves???-   smdutch22
its usally the other way around,theres a broken hard part in your tranny.it wont let the pump ingage to releive pressure fom clutches,in turn wont go into drive.sorry, but thats going to be expensive.get extended warrenty and then turn it in before contacting the dealer.
i have a 2002 aavalanche and it wont shift to 3rd and 4th. some guy said that i had to rebuilt it but i think it could be somethisn else. what do you think?
My 99 GMC Jimmy has the service 4X4 light on, and the light is off that is normally indicating it is...
(More)
My 99 GMC Jimmy has the service 4X4 light on, and the light is off that is normally indicating it is 2 wheel or 4 wheel drive, it also will not engage in 4X4 ? This was an occasional problem but now its constant. thanks
i have a 2001 chevy 1500 just replace the axle seals in it just in time for some snow now the front...
(More)
i have a 2001 chevy 1500 just replace the axle seals in it just in time for some snow now the front wheels will not lock up into 4x4 i have presed the buttons and hear noises i have tested the wires for the front diff motor it seams that only one wire lites up with 4x4 on or off. any suggestions would help
2001 Z71 Service 4x4 light came on and the indicater lights for what drive modes I can select do not...
(More)
2001 Z71 Service 4x4 light came on and the indicater lights for what drive modes I can select do not light up. Is this something I can service myself and reset the light?
OK its like a crank up its fine, but when i put it in gear a press the gas it make a grinding noise...
(More)
OK its like a crank up its fine, but when i put it in gear a press the gas it make a grinding noise only when press the gas