Question about 1994 Dodge Intrepid

2 Answers

1998 Dodge Intrepid: engine misfiring

My check engine light was flashing and the code says there is a misfire in cylinder 3, 6 and multiple misfires. The plugs and wires were changed in April of this year. Any suggestions on what could be causing this.

Thanks,

Troy

Posted by on

  • 1 more comment 
  • Anonymous Dec 30, 2008

    My problem is very similar, only it says cylinder 1 misfire, and the engine light is on as well! Hopefullt someone can help. The only difference is mine is a 97 3.5L.

  • Anonymous Mar 21, 2014

    keep getting a check engine light changed spark plugs cam sensor and crankshaft sensor

  • Anonymous Apr 01, 2014

    misfires on number 7 clinder

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Check your connector also to the coil pack. That was my problem. Push on it or move it around slowly and you may end up finding the problem.

Posted on Feb 01, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,114 Answers

Usually wires ign wires & plugs but could be your ignition coil!!test it don"t guys$$ have a spark tester if not invest in one don't bother using a spark plug your just waisting time with that!~

Posted on Jan 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Random Misfire


This can be due to a leaking pressure regulator and or the injector lines leaking. These are located under the plenum, which has the throttle body mounted in the center.

May 28, 2014 | 2002 Dodge Durango

1 Answer

1996 dodge intrepid 3.3L starts but misfires


For engine misfiring problem check the help links mentioned below. Click the link below to go through the troubleshooting procedure :---- Engine misses and truck jumps? Hard to down shift? Issue with high gear only? http://technoanswers.blogspot.in/2012/02/engine-miss-and-truck-jumps-hard-to.html

-----------
Bad miss at idle?

http://technoanswers.blogspot.com/2012/01/bad-miss-at-idle.html

-----------
While stop engine idles like cylinder missing?

http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine-idles-like-cylinder.html

------------
Engine Misfire codes for car?


http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html
Engine Misfire codes?

http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html

--------------
Misfire on cylinder 4?

http://schematicsdiagram.blogspot.com/2011/12/misfire-on-cylinder-4.html

-----------
Oil on spark plugs and car misfires?

http://technoanswers.blogspot.in/2012/02/oil-on-spark-plugs-and-car-misfires.html

----------

This will help.

Thanks.

Feb 11, 2012 | 1996 Dodge Intrepid

1 Answer

I have a 2004 dodge Intrepid, the engine has a miss and I get P300, P306 and P356. I have no Ideal what to check.


p300 means multiple cylinder misfire,p306 means #6 cylinder misfire, and p356 means ignition coil malfunction

Oct 06, 2010 | 2004 Dodge Intrepid

1 Answer

ENGINE MISFIRES WHEN SERVICE LIGHT FLASHES


Hi:
engine misfires are one of the few engine codes that will flash the engine service light. Usually misfires are caused by a failing ignition module, but you can have your vehicle's codes scanned for free at an auto parts store to find out what caused the code. If multiple misfires on all cylinders are detected, it pretty much eliminates a single bad spark plug or wire, but something that effects the entire ignition system, such as a module or pick up. Hope you figure this out!

Apr 22, 2010 | 1998 Ford Windstar

1 Answer

I have 1996 Dodge Gran Caravan, and it gives me these codes: 27 and 43, what do they mean??


CODE 27 - Injector Control Circuit, output driver does not respond properly to the control signal

Code 27 MIL light options: OBDII
P0201 - Injector #1 Control Circuit
P0202 - Injector #2 Control Circuit
P0203 - Injector #3 Control Circuit
P0204 - Injector #4 Control Circuit
P0205 - Injector #5 Control Circuit
P0206 - Injector #6 Control Circuit

CODE 43 - Cylinder Misfire, or Ignition Primary Circuit

CODE $# MIL options: OBDII
P0300 - Multiple Cylinder Misfire
P0301 - Cylinder #1 Misfire
P0302 - Cylinder #2 Misfire
P0303 - Cylinder #3 Misfire
P0304 - Cylinder #4 Misfire
P0305 - Cylinder #5 Misfire
P0306 - Cylinder #6 Misfire
P0351 - Ignition Coil #1 Primary Circuit
P0352 - Ignition Coil #2 Primary Circuit
P0353 - Ignition Coil #3 Primary Circuit

Feb 03, 2010 | 1996 Dodge Caravan

1 Answer

1999 Dodge Intrepid, intermintently misfires, runs


take to autozone and have them check the engine light code to start it's free

Nov 20, 2009 | 1999 Dodge Intrepid

1 Answer

Multiple cylinder misfires 2001 Dodge Intrepid


If the engine is not missing now or running rough,The code may be an old one stored in the computer,
The code for Evap usually comes from someone getting gas and not tightening the fuel cap so it clicks at least four times.

Nov 18, 2009 | 2001 Dodge Intrepid

1 Answer

2004 Neon SXT cylinder misfire


TRY REPLACING THE CRANKSHAFT POSITION SENSOR..HAVE SEEN THESE CAUSE MISFIRES AND LOW VOLTAGE DTCS AS PCM THINKS VEHICLE IS NOT RUNNING..ALTERNATOR MAY NOT BE PUTTING OUT PROPERLY

Jul 05, 2009 | 2004 Dodge Neon

2 Answers

98 camry engine light on w/misfires & system too lean


take sample of your fuel into clear plastic bottle from fuel line
is there any water present?
this can cause these codes and then not go on storing codes for other bank even though that bank will be missfiring also due to water & P0300 Random/Multiple Cylinder Misfire Detected being logged
check all connections to coils/leads & wiring connectors
due to miss fire codes for cyl 1,3,5 all on the same bank
also look and check for air leaks on that bank (hose knocked off or splithose)inlet manifold gasket,brake booster etc...
3 injectors being blocked slightly on same bank posible!!!
check wires and signal

was it running like this b4 tune up & repairs?
this is what codes are
P0170 Fuel Trim Malfunction (Bank 1)
P0300 Random/Multiple Cylinder Misfire Detected
P0301 Cylinder 1 Misfire Detected
P0303 Cylinder 3 Misfire Detected
P0305 Cylinder 5 Misfire Detected

the last code is for trans due to misfire/running lean on bank 1 probably a torque problem code
2e5d889.jpg

May 29, 2009 | 1998 Toyota Camry

Not finding what you are looking for?
1994 Dodge Intrepid Logo

452 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...