Question about 1999 Volkswagen Beetle

1 Answer

Headlights work on high beam but not on low beam is there a fuse

Or something that controls the low beam lights that is separate from high beam

Posted by on

  • 1 more comment 
  • Anonymous Mar 16, 2014

    low beam not going on both

  • Anonymous Mar 30, 2014

    It sounds like the air pump or something runs on/off with ignition off for hours at a time. This last time it drained the battery. Also one low beam headlight was out then the other suddenly died as well. What is running with ignition off and why?

  • Anonymous Mar 31, 2014

    turn signal, high beam

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 491 Answers

On these cars if 1 of the bulbs blow out then you will have to replace them both because they wont work. replace both headlight bulbs and they will be just fine

Posted on Dec 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No low beam yet i have parkers & high beam


Many cars have a separate fuses for low beam, high beam, and the parking lights. Check your ow beam fuse.

Mar 05, 2016 | Cars & Trucks

1 Answer

My low beams wont turn on. only my high beams


low beams are on with the high beams does NOT mean the bulbs are good. The low beams have two separate filaments, one that lights on low beam and one that lights on high beam. That's why the low beams have three terminals but the high beams have only two.It's entirely possible that both low beam filaments have burned out. If the bulbs really are good, then the dimmer switch is the most likely problem.

Oct 12, 2011 | 1999 GMC Suburban

1 Answer

I have a 2003 kia spectra. Can the headlights be adjusted. On low and high beams they seem to be set to low. I feel they should shine out futher to be able to see more while driving at night


the headlights can be adjusted but you can't adjust the high & low beam separately, you can only adjust the light as a unit unless you have a separate high & low beam lights ( twin lights) ......hope this helps......cheers.

Sep 05, 2011 | 2003 Kia Spectra

1 Answer

One highbeam light was very dull like a semi broken wire, so i rewired the bad side to the good side it worked for a couple of flashes to test , high low beam , then no high beam lights at all, are they...


you have a wiring problem, look up cavalier headlight wiring on the internet, there is a harness connector under the battery that sometimes goes bad, or the wires are broken inside the insulation, usually in the front harness, the head lights hi and daytime lights are controlled through the ecm and low beam is on a separate circuit, i have also found problems in the switch or the drl module in the fuse box, any mor questions mail me

Apr 20, 2010 | 1998 Pontiac Sunfire

3 Answers

Low beam not working but high beam is-Pontiac Vibe 2005


I have heard it could be the Daylight Running Light module located under the dash above the brake pedal. The module controls both the daytime running lights and the low beam lights. The high beams are independent of this module.

I have the same problem. I am trying to buy a new module.

Jan 15, 2010 | 2006 Pontiac Vibe

2 Answers

I replaced the headlight bulb because the high


There should be separate relays for the low and high beams. located in the fuse box, probably under the hood. they look like plug-in small rectangular black boxes.

Dec 27, 2009 | 2003 Pontiac Grand Am

1 Answer

How do I adjust the driving lights? when using low beam they point down too low.


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Oct 04, 2009 | 2004 Saab 9-3

Not finding what you are looking for?
1999 Volkswagen Beetle Logo

Related Topics:

973 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

yadayada
yadayada

Level 3 Expert

70365 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...