Question about 1991 Isuzu Amigo

1 Answer

My 1990 Isuzu Amigo's trun signals have gone out. No dash lights, no clicking, no power at the corners when I use the lever---is it a turn signal switch gone bad?

Posted by on

  • ginger_snap May 11, 2010

    Have u checked all fuses (under dash & in engine compartment)? there are also relays to check.
    It seems more likely fuse/relay since u have no dash and no turn signals. Picking up a Chilton's or Haynes manual will help to identify the problem a bit more easier for you.
    I have a 91 amigo myself.



×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

That little truck was my first. Be good to it. It'll be good to you.

Check the relay beneath the steering column. Mine went out, too. Try to snag an OEM one, as third-party ones tend to flash too fast.

Posted on Feb 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 ISUZU AMIGO TURN SIGNALS WILL NOT WORK


check fuse. check also the turn signal bulbs

Sep 18, 2014 | 1999 Isuzu Amigo

1 Answer

No taillights park or dash lights


check park/tail fuse regarding dash ,park ,tail problem .brake light on passenger side is probably the brake globe needs replacing .Turn signals on passenger side could be globes or switch,check globes first ,if globes and fuse are ok ,may well be the switch especially if park switch and turn signals are on the same switch lever/stalk

Jan 15, 2014 | 1990 Buick Century

1 Answer

All 4 turn signals dont work


there should be a fuse for the direction light. and a direction switch can be bad and still click and operate as it suppose to

Dec 21, 2012 | 1997 Geo Metro

1 Answer

Where is the turn signal module on an 05 Malibu?


The modual is the trun signal it's self. Other than that it runs through the BCM and that distributs the power to the lamps.
Do the indiactors on the dash light up at all? Or do you just hear a clicking noise?

Dec 23, 2009 | 2005 Chevrolet Malibu Maxx

1 Answer

I have a 2000 Amigo Isuzu and no rear lights or interior lights. I have brake and turn lights when I brake or use the turn signals. Help!


have you checked the fuses under the dashboard, stupid question! but you can visally see if there burnt out holding them up against light, if not change the bulbs!
hope this helps !

Sep 22, 2009 | 2000 Isuzu Amigo

1 Answer

92 Amigo Project


check rotor, wires and plugs... could be a fuel injector...

Aug 12, 2008 | 1992 Isuzu Amigo

2 Answers

My brake light stays on


the sensor in the handle is bad... do you have the dash mounted lever or the console (between driver and passenger seat)??

both are easy to fix...if you really feel like fixing it. My light has been on about 40,000 miles lol.

Jul 21, 2008 | 1990 Isuzu Amigo

Not finding what you are looking for?
1991 Isuzu Amigo Logo

204 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...