Question about 2002 GMC Yukon Denali

1 Answer

Passenger power window in my 2002 GMC denali keeps sliding down

I would like to know the best way to remove the door panel
to access the inside mechanics of the power window.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 840 Answers

Well look for little pop outs first then then look for screws in those little openings then look on the outside edge of the trim panel for retainers to remove then pull the mirror cover off just pops of then pop out bottom of the door and then pop out the sides of the trim then pull up and out should come right off after that take vapor barrier off and then you will see the interior parts of the door and mechanics of the door/ Please rate my response thank you very much

Posted on Jan 31, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ive got a chevy tahoe 2002 and the passenger side window wont roll up all the way. When i get it up all the way it slides down about 4 inches


Assuming you have power windows. Had similar problem on 2000 Buick LaSabre. Had to replace electric motor drive assembly inside of door. The motor moves a steel cable around nylon/plastic pulleys. In time the cable cuts into the pulley. Access motor assembly by removing inner door panel. I had to purchase assembly from the dealer ($$$). Digital snapshots as you disassemble will help you reassemble. Job took about 1.5 hours, and I had never done it before.

Feb 20, 2011 | 2002 Chevrolet Tahoe

1 Answer

Left door power window won't go up or down. Motor seems to run


Yes you do, once it is removed and the weather protection is removed you should be able to see what the problem is
either the drive gear on the motor is stripped or the cable has broken
may also be something simple like a clip has broken
you will find it anyway

Jul 02, 2010 | 2002 GMC Sierra

1 Answer

How come on a 2002 GMC Denali if you lock your key inside


i would say the theft module saw the door trying to be open without the door lock or fob first, once the door lock button was pushed it shut down, it new doors were trying to be unlocked in a theft manner, once shut down it needs time to reset or needs to see ignition cycle with key and read chip in key, smart system isnt it, good luck.

Oct 21, 2009 | 2002 GMC Yukon Denali

2 Answers

02 GMC Denali XL 6.0L drver's side door lock was


the lock should come out of the handle. usually there is a clip holding it in. sounds like its broken and you will need another handle, a locksmith should be able to get another lock and make it fit your old key. The dealer is the only place to get a new handle from as far as I know.

Oct 19, 2009 | 2002 GMC Yukon Denali

1 Answer

How to install passenger side glass on a 1997 gmc sierra 1500. power windows.


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Remove the clips and screws securing the old window to the arm and slide it out through the top of the door (may need to be maneuvered out)

Sep 10, 2009 | GMC K1500 Cars & Trucks

2 Answers

The front passenger power window will not come up. The window seems to be stuck


It is the switch or motor, remove door panel and feel the motor and flick the switch up&down if you feel a click in the motor it is not the switch it;s the motor, motor & regulator is about $125.00 at auto zone $65.00 on-line

Aug 01, 2009 | 2002 GMC Yukon Denali

1 Answer

2002 Jeep Cherokee Rear Passenger Side Window Slides down with no


i CAREFULLY REMOVED THE PANEL, THE SPEAKER, TAKING PHOTOS ALONG THE WAY (INCLUDING PHOTOS INSIDE THE DOOR WHERE I COULD NOT SEE), AND EVENTUALLY REMOVED THE TRACK WITH THE MOTOR AND CABLE. i FOUND THE PLASTIC MOUNT FOR THE UPPER CABLE BROKEN. AFTER MUCH STUDYING I FOUND THE CABLE SNAGGED ON THE REEL. I CLEARED THE SNAG AND LUBED THE REEL. I DRILLED A HOLE TO ACCEPT THE CABLE END AT ABOUT THE RIGHT DISTANCE , INSERTED A SCREW AND EPOXIED THE SCREW AND END IN POSITION, I HUNG THE ASSEMBLY ON THE OUTSIDE OF THE DOOR , PLUGGED THE SWITCH IN AND TURNED THE CAR ON -- THE TRACK WORKED PERFECT. I REPLACED ALL COMPONENTS, ATTACHED THE WINDOW, REPLACED THE PLASTIC REATTACHED THE LINKAGES TO THE LOCK AND DOOR OPENER. WORKS GREAT. SAVED SEVERAL HUNDRED DOLLARS FOR THE COST OF A COUPLE OF HOURS AND A SCREW AND JB WELD EPOXY.MEMBRANE, REINSTALLEED THE SPEAKER, 8f290b9.jpg2679bfa.jpgf4a65ed.jpg

Jun 20, 2009 | 2002 Jeep Grand Cherokee

1 Answer

Window on passenger side will not come down need door panel instructions.


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

May 31, 2009 | 2002 Lincoln Continental

1 Answer

Had a little booboo


ok, there is a triangle shaped cover on the inside of the door opposite of the mirror. use a butter knife or similar tool ( flat screw driver) and pry the cover off, it is held in by 2 clips. with that removed you will see the 2 nuts that hold the mirror on (there may be foam insulation covering the nuts). if yours is power then disconnect the connector first then remove the 2 retaining nuts. make sure to hold the old mirror or it could fall after you take the nuts out. install new one in reverse order. viola! good as new!

Feb 21, 2009 | 2002 GMC Yukon Denali

Not finding what you are looking for?
2002 GMC Yukon Denali Logo

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...