- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi. Which speed sensor? There is one at each wheel, and these work out road speed and are the abs break speed sensors. Ther is a cam speed/position sensor at the top of the engine. There is also a crank spped sensor that picks up from the rear crank oil seal housing.
I assume by power failure you mean a dead battery? If so, open bonnet and connect jump cables to +ve terminal at front left hand side of engine bay and the earth cable to the engine mounting taking care not mark the alloy. Allow the battery to charge from the donor vehicle for at least 10 mins before inserting your fob. Take car for a 20min drive to recharge battery. If you need to get to battery for any reason, it lives under the right rear passenger seat. Leather seat is atached with velcro, removing it reveals a cover secured by 10mm bolts, underneath is battery.
YOU CAR DONT HAVE FRAME YOU HAVE A UNIBODY.UNIBODY IF REAR OF CAR BEEN DAMAGED.THEN THE REAR FENDERS AND QUARTER PANELS HAS TO CUT OUT AND WELDED IN PLACE ALSO THE TRUNK FLOOR PAN HAS TO BECUT OUT AND WELDED BACK IN PLACE .THE TRUNK LID HAS TO BE REMOVED ALSO THE BUMPER HAS TO BE REMOVED.BASICALLY BY CAR BEEN A UNIBODY THE REAR PART OF THE CAR HAS TO BE CUT OUT NEW BODY PARTS WELDED BACK IN PLACE.THIS JOB FOR BODY SHOP.YOU NEED LOTS OF TOOLS AIR CHISELS MIG WELDER, GAS WELDER,BODY JACKS ,HYDRALIC UNIBODY FRAME STRAIGHTNERS.
its so easy and you well not need to do any thing just switch (gas) fuel from U95 octane to super 97 or 98 octane
its amazing i had this problem for 2 years it well take just one day never go back to low fuel
with my best regards
pull out negative terminal battery located under rear right seat.wait for 5 min n then install again the lead negative terminal.insert the key to ignition cylinder.turn the key on off three times.now start the engine.make sure u use recommended fuel grade.