Question about 2002 Ford E350

Open Question

Ford f350 no reverse

F-350 rolls forward 6 inches and stops as if in park when placed in the reverse position and drives forward when placed in the neutral position. all other gears work and shift properly when driving

Posted by on

6 Suggested Answers

  • 65 Answers

SOURCE: 1991 Caprice No reverse. Moves in neutral. All forward gears OK.

shift linkage needs adjusting,,could be bent, easy fix, located along firewall to fram beneath the column, ask your son wut he ran over and didnt tell u about... hope i could help...:)

Posted on Mar 23, 2009

dr_greg
  • 192 Answers

SOURCE: cannot shift into reverse although forward gears all functional

have ur shift linkage bushings replaced....most likely thse are torn or completely broken .. this is common on these models..also on some vw's of the same years

Posted on Apr 10, 2009

motor1258
  • 6674 Answers

SOURCE: 1991 Caprice No reverse. Moves in neutral. All forward gears OK.

What engine? Rear wheel drive ?Sounds like shift linkage or cable out of adjustment slightly. Have a look at where cable or rod attaches to transmission for adjustment. If not sure of what your looking for get back to me with info.

Posted on Apr 11, 2009

  • 412 Answers

SOURCE: chrysler concorde car wont shift from reverse to park

it sounds like your gearshift cable is broken..if you can jack up vehicle and support it safely,get someone to move shifter and look on driver's side of transmission and see if linkage is moving on trans..linkage is up near top of trans..i have seen this problem before

Posted on Aug 16, 2009

dnewcombe1
  • 1564 Answers

SOURCE: Hi, My 1991 F350 7.3 diesel will go in reverse but

I can only assume by your desciption that this is a manual transmission. If I'm correct, it sounds as though your clutch is not releasing fully and needs to be checked. This can also happen if your gear oil is to low allowing the syncronization rings to spin freely.

Posted on Sep 10, 2009

  • 7 Answers

SOURCE: My 1999 ford explorer will not go into park;all other gears work

DIsconnext and reconnect the linkage at the transmission. You may want top replace the linkage cable all together. Make sure you set the parking break and block the tires

Posted on Apr 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHAT IF YOUR CAR STARTS ROLLING IN GEAR


Please be more specific. Most cars with automatic transmissions will roll forward in Drive or backwards in Reverse. If the car is on a slope, it can roll due to gravity, even backwards in a forward gear. If you mean the car is rolling when it's in Park, either the transmission is faulty or it's not fully engaging in Park. A third possibility is that you mean that, after stopping with the brakes, the car begins to roll with your foot still on the brake. That would be a brake problem. If you've had the car for a while and this is a noticeable change, take it to a mechanic and have it checked. Explain your concerns clearly.

May 30, 2014 | 1994 Ford Taurus

1 Answer

F-150 2005.. automatic when put in drive position it wont go forward...feels like i have brakes on.the same on reverse Can that be the converter


Jack up the truck and see if brakes are locked.. or just try pushing it if it rolls its probably a trans problem not a brake problem. could be the park prawl is broken in the Trans.

May 12, 2014 | 2005 Ford F-150

1 Answer

96 probe will not stay in place when in park, will not reverse or drive


sounds like the cable shift has come apart but without my head under the bonnet i honestly couldnt say ,never knew they made a auto version of this car as never seen one here

Mar 02, 2012 | 1996 Ford Probe

2 Answers

97 f350


Check your linkage

Apr 20, 2010 | 1997 Ford F350 Crew Cab

1 Answer

Have 1999 Ford Expedition xlt. My gear indicator is messed up, When I am in drive, it shows 2, when i am in park it shows reverse.


This comes straight from the repair manual..
1. Remove the upper steering column cover.
2. Put the shifter in drive position.
3. Move the shift lever clockwise until it stops (all the way to first gear position, then move it back two detent positions to the Drive position.
4. Hang an a weight (something) with 8 pounds of weight on the lever to hold it in place.
5. Center the indicator neddle in the middle of drive position.
6. Rotate the thumbwheel on the bottom of the steering column to remove all slack from the indicator cable.
7 Install the upper steering column cover.

Jan 16, 2010 | 1999 Ford Expedition

1 Answer

1996 ford f 350 rear right power window wont roll back up we rolled it all the way down now its stuck down


Try tapping lightly on the door panel in different places,while the key is on,and holding the window switch in the up position.sometimes,that will jar the motor and the window will work.

Oct 03, 2009 | 1996 Ford F350 Crew Cab

1 Answer

1991 735i automatic transmission,no forward drive, has reverse


The transmission has gone bad and all I can say is that you need to replace it.

Good luck.

Aug 29, 2009 | 1986 BMW 7 Series

1 Answer

1994 Ford Ranger won't shift into drive


In 9 out of 10 cases when I see this problem in the ranger, it is the planetary gear in the transmission. It is made of the cheapest metal available. It breaks usually from going to park before the truck stops or switching from reverse to drive while still rolling. Just a Idea , But I hope it isn't that . Reverse will work fine for a while, and have no forward gears.

Jan 15, 2009 | 1994 Ford Ranger Supercab

Not finding what you are looking for?
2002 Ford E350 Logo

Related Topics:

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...