DTC PO700 automatic transmission control system malfunction.
can you tell me where this is.
when you see code po700 what has happen the pcm has received message over the CCD bus from the transmission control module has detected a problem.you need a transmission shop to check it out transmission using a scanner,either 2 things causing the problem either transmission has a faulty lock up torque converter solenoid or the TCM HAS FAILED.
thnks it really is helpful
×
Here you go E A T X controler dtc present "specific fault must be aquired from the EATX via CCD or from aisin via ISO 9141 ,i'm not sure i know what it is ,but this is the best i could do ,good luck hope it helped.
SOURCE: how to fix code 700 on my 2003 dodge Durango can't find the sensor
Well there is no sensor.
Code 700 is a general fault with the transmission control module.
It could be a problem with the module, or the wiring between the module and the transmission, or between the module and the engine computer. Usually there are more codes to go with a code 700.
410 views
Usually answered in minutes!
thank you for your help Jonah and steve
×