Question about Chevrolet Monte Carlo

2 Answers

Hi I have a 2006 chevy monte carlo ss. I left the key in the ignitin overnite. Today I went to start it and it wont turn over and the brake, shifter and all power is out on it. Can anyone help?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How to Program a Chevy Monte Carlo Keyless Entry Remote Fob

Through year model 2005

1. Insert the key into the ignition.

2. Turn the key to the ON position. (do not start the engine)

3. Using the factory radio, press and hold DISP until SETTINGS is displayed on the screen.

4. Press SEEK until FOB PROG is displayed on the screen.

5. Press the NEXT button, BEGIN will be displayed on the screen.

6. Press DISP, hold the LOCK and UNLOCK buttons on the fob to be programmed (may take up to 15 secs), a chime will be heard to confirm successful programming.

7. Scroll until EXIT is displayed on the screen, press DISP to exit program mode.

Chevy Monte Carlo Keyless Programming Procedure
For year models 2006 and up

1. Insert the key into the ignition.

2. Turn the key to the ON position. (do not start the engine)

3. Press the Vehicle Information button until "PRESS TO RELEARN REMOTE KEY" is displayed on the screen.

4. Press the Reset button until "REMOTE KEY LEARNING ACTIVE" is displayed on the screen.

5. Press and hold the LOCK and UNLOCK buttons on the fob to be programmed, a chime should sound to indicate successful programming. (may take up to 15 secs)

6. Turn the ignition OFF to exit program mode.

Posted on Sep 11, 2011

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 15 Answers

Well i would deffinatly have the battery checked out because more than likly if you left the key in the on position the battery is dead let me know if this helps

Posted on Dec 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2000 monte carlo ss 3.8 cranks but wont start


Don't worry I'm sure you will get the solution of your problem, just check the link I attach.
Chevy Monte 2000 2005 Factory Service Workshop repair manual

Jun 14, 2016 | 2000 Chevrolet Chevrolet Monte Carlo SS

1 Answer

Blend door on 2003 montr carlo


How To Install Replace AC Heater Temperature Actuator ...

? 4:40
https://www.youtube.com/watch?v=mVP09M7hLB4
Jul 21, 2014 - Uploaded by 1A Auto Parts
http://www.1aauto.com/temperature-blend-door-actuator/i/ ... To Install Replace AC Heater Temperature Actuator 2000-05 ChevyMonte Carlo.

2006 Monte Carlo: Blend Door Actuator Replacement ...

? 2:19
https://www.youtube.com/watch?v=_B17o-Ljhfs
Mar 31, 2015 - Uploaded by Adam Strojny
In this video I will show you guys how to replace the actuators behind the glove compartment that where causing ...

Chevy Blend Door Actuator Replacement - Part 3 - YouTube

? 12:26
https://www.youtube.com/watch?v=1q9ugwlqDoo
May 14, 2013 - Uploaded by Dan Abbott
My final step to replacing the blend door actuator. ... Thanks for the video, need to do this on my 04 monte carlo ss, went to use the heat today .... 2003 Chevy Suburban AC-heater air direction problem.mov - Duration: 1:36. by ...


Dec 26, 2015 | Chevrolet Monte Carlo Cars & Trucks

1 Answer

Where is the fuel pump restart at on a chevy


On driverside on left of brake look for a hole in fire wall

Sep 16, 2014 | 2002 Chevrolet Monte Carlo

1 Answer

My key wont turn my monte carlo ignition at all my steering will wont lock either my gear shift is locked what do i do


if it is a in floor shifter take the cover off and there is a pink are red button for emergencies push it ,I know it sounds crazy,if not look at the linkage iunder the car,or check I think that year came optional with a anti theft option check that there is a order to unlock everything like put your foot on the brake the the key in and turn the steering wheel and it will lock .I am not sure of the order but it is something like that but I had the same problem and it was the pink button ,and that button is for when the cable brakes so it gives you other options

Apr 22, 2013 | 2006 Chevrolet Monte Carlo

1 Answer

06 monte carlo charging system


ck the alt. output should be around 13/14 volts

Jun 09, 2012 | 2006 Chevrolet Monte Carlo

1 Answer

KEY WAS LEFT ON OVER NIGHT NOW EVEN AFTER CHARGING BATT. CAR WILL NOT START, KEY WON'T COME OUT OF IGN.OTHER VARIOUS PROBLEMS 06 MONTE CARLO SS


is your "SECURITY" light on the dash flashing when key is on start.
if it is leave the key on start for about 10 minutes and then try to start your car

Feb 26, 2010 | 2006 Chevrolet Monte Carlo

1 Answer

My shifter is stuck in park


If the steering wheel is turned the continue to turn the steering wheel in the same direction as the tires are going while applying firm pressure to the brake the try to pull it out of park. I know this sounds crazy but they have so many safety swithches on them, you may have one not activating.

Feb 07, 2010 | 2007 Chevrolet Monte Carlo

1 Answer

Key stuck in ignition


if battery is dead you will not be able to get key out. have someone jumpstart and it should work

Dec 29, 2008 | 2006 Chevrolet Monte Carlo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

674 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...