Question about 1997 Dodge Intrepid

2 Answers

No turn or emergency signals.

Having trouble with turn signals?. Replace signal module, both fuse okay. No emergency signals as well . Will not light up, Nothing. Please help if any knowledge of trouble shooting. Thanks Bob

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

As I described the problem, No lights, have replaced signal stat already> Both fuses have been checked. It's 95 Model. They have modules., 5 prong connection.

Posted on Dec 30, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 128 Answers

Hi there

your flasher unit may have stopped working

this is a unit that makes the light blink on and off
if it stops working then you will have no lights
the best thing to do is have it replaced
the unit is normal behind the lower dash on the left hand side of stearing wheel
have a look for it. then take the unit to a car shop and they should be able to help you

hopes this helps
ricko

Posted on Dec 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn signal not working on a 05 impala


Have you checked the fuse for the signal lights yet? Verify the switch is getting power. Also the signal is produced by the BCM module not a flasher like in older cars. BCM is a module that controls most body electronics. See picture below.
15224203_primary__ra_p-zz34d0kni05kgtwdyxwri4cx-4-0.jpg

May 18, 2017 | Cars & Trucks

1 Answer

Turn signals don't work.. Still have 4 ways and brake lights wrk... Module is good and fuses good.


An easy way to test if the flasher is bad is to remove the flasher unit under the dash and replace it with the emergency flasher, if it works just replace the turn signal flasher.

Mar 30, 2015 | Cars & Trucks

4 Answers

Turn signal lights don't work


The first place to start are fuses, check your owners manual for location, typically left side of dash.

The emergency (hazard) flashers and turn signals are on separate fuses and run through the hazard switch. If all the lights work when the hazard switch is on then the problem will likely be a blown turn signal fuse.

Other possibilities are the hazard switch itself is bad, the turn signal switch is bad or a broken wire, all of which require a meter (or test light) wiring diagram and knowledge of the circuit to test it - better to have it done.

Robert Grove
Mobile Mechanic Malibu 310 651 8020 Auto Truck RV Mobile Repair...

Aug 09, 2014 | 2002 Chevrolet Impala

3 Answers

Hazard lights wiring my singal turn lights are not working


Hi, Check the fuse box. The fuse maybe blown. Good luck.

Sep 17, 2011 | 2002 Chevrolet Impala

1 Answer

I have a 2006 GMC Envoy and the problem that i have is that all the signal lights stopped working including the hazard lights i checked all the fuses and all are find. What could it be? If somebody can...


{: ) If the IGN E fuse and the HAZARD fuse at the underhood fuseblock is okay, and the signal lamps wont light or flash at all, and assuming the wirings & connectors are also okay, it could be your turn signal multifunction switch or your turn signal hazard flasher module that is faulty.

Feb 26, 2011 | 2006 GMC Envoy

1 Answer

Front driver turn signal quit. changed bulb, worked for short time, then quit. bulb OK. passenger side quit 1-2 months later. bulb OK. neither front emergency flasher work. automatic daytime front lights...


Check for head light (daytime)relay to be bad,this might have to do with the turn signals also,if the turn signals on this car,also have running lights in them,If this relay is not bad,replace the body control module.

Nov 07, 2009 | 2005 Pontiac Grand Prix

1 Answer

1992 grand prix turn signals not working


these cars are common for bad signal light switchs, try lightly moving lever up and down while signal is on,see if it starts working,BUT FRIST MAKE SURE FLASHER IS OKAY. ( there are 2 flashers one for hazard lamps and one for signal lamps.

Oct 03, 2009 | 1992 Pontiac Grand Prix

2 Answers

Tail lights and tag light not working


Start pulling the fuses one by one until you find the blown fuse. I am having the same problem on my wife chevy van, and that is what I started doing. It did not affect the electrical system.

Aug 05, 2008 | Lincoln LS Cars & Trucks

4 Answers

Turn signals not working --- 2001 Cherokee Limited


Check the flasher under the dash to the left of the steering column. It's got about 8 or 10 wires plugged into it.

May 30, 2008 | 2001 Jeep Cherokee

Not finding what you are looking for?
1997 Dodge Intrepid Logo

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...