Question about 2002 Chrysler Town & Country

1 Answer

Mine was working fine in my 2002 Chrysler Town and Country and then a postal truck hit the front end of my car and all of a sudden the front blower motor stopped working but the rear is fine.

Posted by on

  • lmwarner70
    lmwarner70 Dec 29, 2008

    My hubby already checked all the fuses and they appear to be fine. He even removed the front blower fuse and put in in the rear and the rear still worked so the fuses appear to be fine. He pulled them all and tested them. I so appreciate your help on this.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Chrysler Master
  • 752 Answers

Hi my name is Allen!

We can work together to fix your problem, even if it takes a few days, we will work on it until it is solve!

Here is what I need you to do first, if you have a test light, you need to check all the fuses.

1st-turn the key on, engine doesn't have to be running. with the test light find a good ground to clip it onto, then with the probe end touch it to one side of the fuse, then to the other side of the same fuse. The fuse should light up on both sides of the fuse, If it doesn't you need to replace that fuse.

NOTE: If you do not have a test light are know how to use one, drive you car to AutoZone or another auto parts store and ask them if they will check your fuses to see if one is blown.

Next; contact me here at FixYa, with what you have found. If all the fuses were good, then we will move on to the next repair procedure.

I'm honored to help, and we will work together until we have solved your problem!

Posted on Dec 29, 2008

  • Big A's Auto Repair
    Big A's Auto Repair Dec 29, 2008

    Thats great, this is what I needed to know, here is how you fix your problem.

    You will need a blower motor resister, you can buy it at the dealership.

    NOTE: If you have Auto Temp it is call A/C Power module, the resister is for Manual A/C.

    When you get this part, here is how you replace it, its very easy to replace.

    Lower the glovebox and it is straight behind the box mounted on the side of the A/C Housing held on by 2 screws.

    First unplug the connectors, then remove the 2 screws you will need a 5/16 socket, then pull it straight out and push the new one straight in and thats it.

    Please don't forget to give me a rating after the repair is done!

    If you need further assistance contact me at FixYa!



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Replace front blower motor on 2002 Town and Country van

once you have the 5 screws out , you should be able to grab the motor and give it a twist for it to come out..

May 12, 2014 | 2001 Chrysler Town & Country

1 Answer

Town and country front blower stopped working


Nov 11, 2013 | 2003 Chrysler Town & Country

1 Answer

Front blower not working in 2004 town and country. Hot air comes out sometimes but blower is not working. Rear blower working fine. What should I try?

chrysler vehicles are known for the blower motor resistor going out, it is located on the blower box either behind or below the glove box. hope this helps

Jan 30, 2011 | 2004 Chrysler Town & Country

1 Answer

I have a 2002 Chrysler Town and country i have a 3.3 v6. My heat in the front only worked on high and i drove it a while now no heat would come out the front no defrost nothing so i went ahead and replaced...

My 2002 Town and country did EXACTLY the same thing.... As of yesterday it will not work on high either. Did you find a solution?? It is -5 degrees outside.... I need defrost!

Dec 31, 2010 | 2002 Chrysler Town & Country

1 Answer

2002 Chrysler Town and Country Rear Heat/Air only on High

most of the time the resistor is located downwind of the blower motor so it should be not to fao from the blower motor in the right rear of the van behind the quater trim panel which is the hvac unit is located

Jun 01, 2010 | 2002 Chrysler Town & Country

1 Answer

Fan does not blow in the front for air conditioner

most common problem on this vehicle is the blower motor resistor

less than $40 and only two screws to remove

May 08, 2010 | 2002 Chrysler Town & Country

1 Answer

Describe your 2002 Chrysler Town &

first i will do to change the blower motor resistor and see what happen it is near the blower motor and see if any wires burned out

Jul 14, 2009 | 2002 Chrysler Town & Country

1 Answer

2002 Chrysler Blower Motor - Van than postal truck hit

is the blower unit getting power at the plug in? use 12v light tester, if so then your ground good? if so you need a new blower simple!

Dec 29, 2008 | 2002 Chrysler Town & Country

Not finding what you are looking for?
2002 Chrysler Town & Country Logo

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides