Question about 2000 Ford Windstar

1 Answer

How do i drain my fuel tank for ford winstar 2000 model?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 948 Answers

Disconnect the fuel line coming out of the fuel tank, or if it is difficult to get to the line at the tank try where it goes into the fuel filter or fuel pump. You will need a container to hold all the fuel, could be as much as 18 gallons.

Posted on Dec 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where to cut access hole for fuel pump on a1999 ford windstar


you trying to blow yourself up
should not be done that way
have to remove the petrol tank

option ..
fit an aftermarket inline external electric fuel pump close to the tank make sure it pumps the correct fuel pressure for the 1999 winstar
use the wiring and plumbing from the internal pump to power the external pump



0900c152800ae1dc-0qp3qonckhgbjimftddyp5do-1-0.gif

index-0qp3qonckhgbjimftddyp5do-1-1.jpg

mds-external-efi-fuel-pump-kit-pip324_1322-0qp3qonckhgbjimftddyp5do-1-3.jpg44-0qp3qonckhgbjimftddyp5do-1-4.jpg

Feb 21, 2017 | 1999 Ford Windstar

1 Answer

Where is the oil pan located on my 2000 ford winstar


The oil pan is on the bottom of the engine. It will have a drain plug to drain the oil at the lowest point on the oil pan.

Dec 12, 2014 | 2000 Ford Windstar

1 Answer

How to change a fuel pump in 2000 f150


1) Drain the fuel tank
2) Remove the fuel tank
Special fuel line disconnect tools are required to disconnect the lines.
3) The fuel pump is an integral part of the fuel sending unit and is serviced as an assembly.
4) Install in reverse order

Feb 24, 2010 | 2000 Ford F150 Flareside SuperCab

1 Answer

The codes on my ford winstar say that it is runing lean on bank 1 and 2 what do i need to replace


The fuel filter for starts,if this does not fix the problem,replace the fuel pump,it is in the fuel tank.

Feb 22, 2010 | 2003 Ford Windstar

1 Answer

Install a fuel pump ford winstar


you must drop fuel tank then remove pump assembly from top off tank,

Dec 12, 2009 | 1999 Ford Windstar

3 Answers

I have a 2000 ford winstar with a code 1131 what


This has to do with your bank one O2 sensor. You may just need to clean it off, possible you may have to replace it.

Nov 06, 2009 | 2000 Ford Windstar

3 Answers

How to drain ford fusion fuel tank


The "MOST EFFECTIVE
" way is to REMOVE The FUEL TANK and DRAIN it By Tipping it over to Pour From FUEL INLET HOSE. Im Sure you Dont want to Here this as it Requires Much WORK . , BUT It IS The MOST EFFECTIVE Way to EMPTY The TANK.

Oct 31, 2009 | 2004 Ford Fusion

1 Answer

Ford winstar 2000 lx


No, they use a timing chain.

Feb 28, 2009 | 2000 Ford Windstar

2 Answers

2000 ford winstar with 198000 km


The codes are lean fuel condition for both banks. A very common problem with this engine that will set these codes are the upper & lower intake gaskets. You may experience a rough or rolling idle at cold start up and the condition will go away as the engine warms up. If you have checked all the basics such as vacuum leaks or air inlet leaks between the air filter box and the throttle body, then I would consider replacing these intake gaskets. Good Luck and please leave rating. Thanks

Dec 05, 2008 | 2000 Ford Windstar

Not finding what you are looking for?
2000 Ford Windstar Logo

Related Topics:

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

69114 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22026 Answers

Ron Lankford

Level 3 Expert

5383 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...