Question about 2000 Chevrolet Blazer

1 Answer

2000chevy blazer random cyl missfire number 1 cyl

I have replacedcap rotor plugs wires and alsoremoved upper and lower intakesand still have random cyl missfire on cyl 1

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

Just to let you Know what you R getting into-I just got rid of My 2000 Blazer (THANK GOD)!!!! If you check out the Recalls and Complaints Online for the 2000 and Up Chevy Blazer you will be Reading for Months!!!! I am Chevy to the BONE and bought this for My Wife-It was GREAT for the first 15000 Miles and then Everything went Haywire! The Seats Broke, Lights quit, Tranny went Twice, Brakes Failed 3 Times, NEVER Ran Right again, Guages quit working, ON and ON and ON. GM will NOT honor these Recalls and Fixing them is REALLY Expensive. Just MY Opinion But, GET RID OF IT WHILE YOU CAN!!!! Took a BIG loss on Mine and Don't Regret it!!!!

Posted on Dec 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

If the timing chain is off 1 tooth on a 01 blazer 4.3 engine would it set a P0300 code and show up misfire data on cyl 1 & cyl 4


YES, u may have another problem but the answer to your question is you will get a misfire

Apr 10, 2017 | Cars & Trucks

1 Answer

09 accent cyl 4 missfire, plug injetor coil all ok cyl comp test all within spec. changed pcm old one stopped workin alltogether. all no change,intermittent missfire


SWAP COIL LIKE FROM CYL NUMBER 1 TO 4 AND ROAD TEST UNDER LOADS IF CHANGE THE MISS TO CYL NUMBER 1 NEED A COIL OR BAD PLUG AT CYL NUMBER 4

Sep 02, 2014 | Cars & Trucks

2 Answers

Circuit codes p0300


that pertains to random secondary ignition missfire.possibbly another code to help pinpoint which cyl. is missfireing po304 #4 cyl. spark plug,boot/wire coil/or individual coil pack,ignition module.check in that order.need more info year,vin,etc.

Aug 25, 2014 | Cars & Trucks

1 Answer

96 acura tl 2.5 rough idle after warm up with rpm swings ignition and fuel pressure good sparkplugs black and new codes; primary o2 heater circuit bad missfire cyl.5 random missfire


REPLACE DISTRIBUTOR CAP AND ROTOR REPLACE SPARK PLUGS AND WIRES IF NOT BEEN CHANGED IN LONG PERIOD OF TIME.CHECK IGNITION TIMING.CHANGE AIR FILTER CLEAN FUEL INJECTORS.IF ENGINE STILL MISFIRE IGNITION COIL IS WEAK OR YOU HAVE LOW CYLINDER COMPRESSION.

Jul 21, 2011 | 1996 Acura TL Series

3 Answers

My S-10 keeps giving a P0300 dtc. Can't figure out what is setting this code. Usually misfires at idle. Any suggestions?


if u change plug wires ,coils ,plugs and still having problems check the injecter with a pulse light the one that dont pulse the pcm is bad are broke wire if all of them are pulseing then change the injecter.had the same problem on a 2000 s10 2.2

Apr 27, 2010 | 2000 Chevrolet S-10

2 Answers

I have 1999 318 4x4 dakota with fault coads


These are misfire codes.This means that your vehicle is missing.The 300 is a random misfire and the 305 is for cylinder 5,and the 306 is for cylinder number 6.Check the plugs if they are good then you could have bad coils.They are top of the plugs.Hope this helps.Good luck.

Feb 25, 2010 | 1999 Dodge Dakota

1 Answer

My 99 blazer 2wd has a random multiple missfires...replaced plugs wires dist. cap and rotor button. it only does it when trying to keep speed, and not under acceleration...y?


Could be plugged fuel filter, faulty fuel pressure regulator (check your pressure) and most probable is a sticky or dirty injector. Do check your timing as well.

Feb 17, 2010 | 1999 Chevrolet Blazer

1 Answer

Hi all, my 99 sub.350,300k,missfire #2


Have you checked the distr cap for cracks??

If plug is oily looking on brand new plug I would suspect worn rings, which would also explain the high PSI. (Motor job in the wind) Especially for 300K.



Dec 03, 2009 | 1999 GMC Suburban

1 Answer

Random missfires


check your timing. alot of times when you change regulators they will offset the timing enough to cause the backfire

Dec 25, 2008 | 1996 Chevrolet Blazer

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

218 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...