Question about 2003 Ford Windstar

1 Answer

Instrument panel symbols on dash of a 2003 ford windstar

In the center of the instrument panel is a symbol (O) or sort of like this that came on today and lights up in red.This stayed on for quite some time.When I stopped the engine and restarted it it was on again.After driving for a few kilometers the symbol went out.Since I have no manual I could not think of what this pertained to.Can you please help.Thanks Larry

Posted by on

  • kuzo Dec 29, 2008

    Hi. Went out and tried it and yes it was the brake lever.I thank you for your help in solving the problem.Have a nice day. Larry

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 120 Answers

Press all the way down your hand brake lever

Posted on Dec 29, 2008

  • Kuya Louie Dec 29, 2008

    Anytime Larry! but you know what, I suggest that you check your brake linings up on the rear because if the lights came on for quite sometimes, it means that the brake lining and the drum had been rubbing each other and this is a significant loss of lining thickness.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2003 lincoln town car battery dash light stays on , will not start


Theres a power/ground problem somewhere in harness or instrument panel..send issue to majicmech@aol.com

Nov 27, 2016 | Lincoln Cars & Trucks

1 Answer

How to change the heater core


Heater Core
Removal and Installation Procedure for 2001 Windstar.

Drain the cooling system.

Remove the cowl top vent panel. Disconnect the heater hoses.

Remove the lower instrument panel utility compartment.
Remove the ash receptacle.

Remove the rear seat airflow duct.
Remove the pins.
Remove the duct.

Remove the four instrument panel support bolts and detach the electrical connectors.

Remove the nuts and remove the center instrument panel support bracket.

Remove the bolts and remove the support brace.

Remove the 2 screws and remove the floor duct.

Remove the 7 cover screws and remove the cover.

Remove the dash panel seal.

Remove the core.

To install, reverse the removal procedure.

Nov 05, 2010 | 2001 Ford Windstar

1 Answer

1996 Ford Windstar Instrument Panel Lights not working


Check your fuse in I/P fuse panel #3 5amp fuse for dash lights, also make sure dont have them off by dimmer switch

Feb 11, 2010 | 1996 Ford Windstar

1 Answer

1999 ford windstar heater


If you are trying to remove the heater core I can help you. First you shouold get the heater core pressure tested..if it doesnt leak there may be another problem. To remove follow the steps:
  1. Drain the cooling system.
  2. Remove the cowl top vent panel.
  3. Disconnect the heater hoses.

229253f.gif
  1. Remove the lower instrument panel utility compartment.
  2. Remove the ash receptacle.

fbf69d7.gif 6.Remove the rear seat airflow duct.
>Remove the pins.
>Remove the duct.386d8f6.gif 7. Remove the four instrument panel support bolts and detach the electrical connectors. d5ba400.gif 8.Remove the nuts and remove the center instrument panel support bracket27b17f3.gif 9.Remove the bolts and remove the support brace4fd1990.gif 10.Remove the screws and remove the floor duct9eed5c5.gif 11.Remove the cover screws and remove the covera3be9b7.gif 12.Remove the dash panel sealf738054.gif 13.Remove the core.dfbbbd4.gif 14.To install, reverse the removal procedure.
    • Lbricate the coolant hoses with MERPOL® meeting Ford specification ESE-M99B144-B or plain water only, if needed.

Dec 28, 2009 | 2003 Chevrolet Silverado 1500

1 Answer

Hi. I have a 2003 ford windstar with ford anti theft. While driving ,the engine just stopped and the anti theft symbol on the dash kept flashing,and the engine will not turn over.I disconnected the...


you will have to take your vehicle to the nearest dealer the theft system is the issue most likley you will have to replace the ignition switch but you will have to get it properly diagnost do yourself a favor and save u time and money

Nov 27, 2009 | 2003 Ford Windstar

1 Answer

How to reset oil for ford windstar 2002


I am assuming you mean the dash oil light symbol? this can be reset by a mechanic with a code reader, he can check and reset them for you, most don't charge just to have a look and he can tell you why it came on too. Good luck

Nov 20, 2009 | 2002 Ford Windstar Cargo

5 Answers

Need to know what the symbols mean on my dash lost


It's your oil light.

Check your oil light as it's most likely low. Other causes can be a bad sensor, or there's a pressure leak

Oct 21, 2009 | 1996 Ford Windstar

1 Answer

How to restart a ford windstar 1995 instrument panel


generally there is a fuse for the instrument cluster. also make sure the dimmer is in the right spot so you have dash lights. if that doesnt work, have the computer checked with a scan tool to see if its popping a code.

Jul 19, 2009 | 1999 Ford Windstar

1 Answer

Orange warning light on dash of 2003 Ford Focus.Its a cog symbol


This light is for multi funtion automatic transmisson cooling system

Apr 11, 2009 | 2003 Ford Focus

1 Answer

1999 ford windstar


This is usually caused by the switches sticking in the door latches. Try spraying some WD40 in the latches and open and close the doors a bunch of times that should take care of it.

Dec 09, 2008 | 1999 Ford Windstar

Not finding what you are looking for?
2003 Ford Windstar Logo

664 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...