Question about 1997 Eagle Talon

1 Answer

Timing Belt Instalation on a 420 A Eagle Talon Engine

Need to know where timing marks are and what to align them with on a 420 A Eagle Talon engine.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 37 Answers

Hello, hope this helpsTiming Belt Instalation on a 420 A Eagle Talon Eng - b001c73.jpg

Posted on Mar 26, 2009

6 Suggested Answers

dustyboner
  • 329 Answers

SOURCE: 91 eagle talon timing

if its only off by one tooth it won't cause any damage.

1830a1b.jpg fd60bd0.jpg 77050a3.jpg 68c3b94.jpg f16c4cb.jpg baaea06.jpg 21b24ae.jpg

Posted on Jul 17, 2008

  • 28 Answers

SOURCE: How do I set the timing when replacing the timing belt.

If you are just replacing the belt because it's worn. Carefully remove the old belt and replace. no timing will be neccesary

Posted on Mar 31, 2009

jagjeffery
  • 316 Answers

SOURCE: TIMING BELT MARKS DONT MATCH AFTER ENGINE TURNED OVER

dont worry about that you will have to turn the motor over 40 to 50 time before those timing belt marks line up again if your pulley marks line up correctly thats all you have to worry about

Posted on May 29, 2009

  • 20 Answers

SOURCE: 95 Eagle Summit 1.8L cam timing marks

get a repair manual there must be a mark or reference point of some kind

Posted on Jul 02, 2009

  • 15 Answers

SOURCE: hey, got a 93 eagle talon ESI, just lost my engine

most engines from 91 to 94 talon will work must be a 2.0 4g63 and dose not matter if its a turbo the heads are the same

Posted on Jan 20, 2010

  • 7 Answers

SOURCE: i have 95 eagle summit with 1.8 mitsubishi engine

pdftown.com scroll to bottom of page and look for 1993-1996 Mitsubishi Mirage, follow the links 1 2 3 you will find what your looking for

Posted on Feb 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The timing belt broke and went to put a new one one and time the car but the crankshaft pully does not have an alignment mark on it to set the timing


The sprocket that is behind the pulley will have an indentation that will line up to a notch or a indent on the engine block.Ahter that is lined up ,see that all your cam timing marks are in line and not 180 degrees apart.Rotate till everything is lined than put pulley on and put a mark on it.

Aug 06, 2011 | 1994 Eagle Talon

1 Answer

I have a 91 eagle talon tsi fwd turbo stock and am working on my timing belt.. I seem to have all the marks lined up and the belt on and tight, but when I crank it over by hand it only turns about a...


It sure sounds like one of the timing marks was not lined up when you installed the belt. Did the belt break while the engine was running? If so then it is possible that one or more valves is bent and binding on a piston. Here is a picture of the tiing marks, You have to line up 4 different marks.

chuckster57_38.gif

Apr 25, 2011 | 1991 Eagle Talon

1 Answer

I have a 1994 eagle talon i replaced the water pump and put on a new timing belt and i can not get the timing right i have tried everything i know what could i be doing wrong? I have made sure the number...


I'm looking at the manual (68030 Haynes) and it shows that if you have the DOHC you make the 2 marks onthe camshafts meet in the center.

That would be at the 3 o'clock position for the left one, and 9 o'clock position for the right one. the crank sprocket and oil pump sprocket align exactly with the timing marks.

NOW, on the SOHC single cam pulley, crankshaft and oil pump pulley all are to be aligned with their index marks, centered, and the balance shaft is to be with the weighted side down to prevent vibration.

I've done the SOHC and the marks are fairly centered when instlalling. Once you've got the belt on in either engine, you should rotate the engine in the normal direction for 2 full revolutions and recheck the timing marks at all positions, readjust, rotate and recheck until set on the marks.

Good luck,

Feb 21, 2010 | 1994 Eagle Talon

1 Answer

Mitsubishi timing belt diagram 2.0 1993


call the jeep or dodge dealer close to u most with still have the diagram and giveit to you free of cost

Oct 29, 2009 | 1993 Eagle Talon

1 Answer

Need timing belt diagram to install new timing belt, the car is a Eagle Talon ES 1994 thank you for your help


My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Timing Belt and Mark(s)Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
http://www.2carpros.com/car_repair_information/year/1994/make/eagle/model/talon/1994_eagle_talon_timing_belt_diagram_marks.htm

Sep 27, 2009 | 1994 Eagle Talon

1 Answer

Timing belt


on the black plastic cover that you take off over the timing belt there is a design to help you align it

Jul 09, 2009 | 1994 Eagle Talon

1 Answer

I cant get my timing marks to line up.


take it to a shop before you destroy the engine

Jun 02, 2009 | 1995 Eagle Talon

1 Answer

Timing belt stipped


About the easiest way, is to put all belts back on properly, and turn engine over before complete re-assembly and check for compression.
I'm not able at this time to confirm that the 1.8L is, or isn't an interference engine, but regardless, you need to do this to see if any damage occurred anyway. Double check your oil pump sprocket & silent shaft timing. It can be 180 degrees out & still run, but engine may have a vibration when running.

Apr 13, 2009 | 1993 Eagle Talon

2 Answers

91 eagle talon timing


if its only off by one tooth it won't cause any damage.

1830a1b.jpg fd60bd0.jpg 77050a3.jpg 68c3b94.jpg f16c4cb.jpg baaea06.jpg 21b24ae.jpg

May 19, 2008 | 1991 Eagle Talon

Not finding what you are looking for?
1997 Eagle Talon Logo

Related Topics:

392 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eagle Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Stewart Dibbs

Level 2 Expert

267 Answers

Are you an Eagle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...