Question about 1994 Jeep Wrangler

2 Answers

94 jeep wrangler 4.0 starter problems

I am having a problem starting the car. When I turn the key all I am getting is a click in my breaker box. I have 12.5v all the way to the starter and I am able to arch the starter to start it. I dont think this model has a soleniod on it. Anyone have any answers I think that it has to be with the amps. anyone have any answers? Thanks steve...

Posted by on

  • Anonymous Jan 23, 2009

    i have a similar problem. i took my starter in and it was alright, checked all the connections the starter is turning but not catching on anything, still compression starts, no one ive talked to knows what to do

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

Posted this in your other one....

try leaving the key in the "run" position for about a half an hour then try turning it to the "crank" position and see if this helps...I had the same problem you're describing, its the computer, I've been told they had a LOT of computer problems with the '94 year...if so then any computer out of another YJ should work...(I used one from a '91)

Posted on Dec 30, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 33 Answers

There should be a small and a big wire to the starter the big one should have a constant 12volt and the other is the control circut. with a multi-meter conect your ground and put the pos leed on the control circut at the starter and have someone turn the key (WITH THE E BRAKE ON,NOT IN GEAR as to not get ran over if this involves being under you jeep) with the key on start (turned all the way) you should read a 12volt signal if not fallow back to your relay looking for a open-circut.

Posted on Dec 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why will my jeep not start


Could be starter soilinoid

Sep 06, 2014 | 2005 Jeep Wrangler

1 Answer

03 wrangler wont start


A problem on the ignotion?
____________-
wifi obd tool for ipad iphone

Oct 08, 2012 | 2003 Jeep Wrangler

1 Answer

92 jeep wrangler won't start battery is good and so is the starter. turn key and just get a click at the starter


there are a couple things that cause the clicking, you either have a bad starter sylinoid or usually a bad connecton at the battery or starter its self, that click is usually just a bad connection issue

Aug 08, 2010 | 1992 Jeep Wrangler

1 Answer

92' jeep wrangler - sometimes i turn the key to start my jeep and it clicks i turn the key off and try again i do this about 5 times and then she turns over doesn't do it all the time though.. i installed...


Sounds like there is a bad conection at the starter
under the left side of the jeep you will see the starter its is by rhe oil pan on top there is 2 wire conections see if it is looose here.
if your going to snug the eire ends up disconect the battery first

Jul 13, 2010 | 2000 Jeep Wrangler

1 Answer

90 Jeep wont turn over.


check clutch switch and starter relay in the power distribution box near the battery. Likely one of them has gone bad. Tell me what you find.

Mar 29, 2009 | 1990 Jeep Wrangler

2 Answers

I have a 94 jeep wrangler 4.0 and I am having problems with the starter. When I turn the key All I am getting is a click in the breaker box. I have 12.5v in the all the way to the starter and I am able to...


It could be the starter relay, it will the small black or gray box that is clicking in your 'breaker box' it is about 1" square. Or it could be the solenoid, it will either be separate from the starter or on the starter itself. You should be able to look up a list or parts, if no solenoid is listed then it will be on the starter and just replace the whole thing. Check the relay first they are cheap and you may have an identical one in the box that you can swap it with to test.

Dec 28, 2008 | 1991 Jeep Wrangler

2 Answers

When I turn the key over on my 94 wrangler 4.0


If you can jump starter, the starter solenoid has failed. Either change solenoid or starter&solenoid as unit & you should be back to normal!

Dec 28, 2008 | 1994 Jeep Wrangler

3 Answers

98 jeepwrangler won't start


This is basic, but first off, try to shift it into neutral, and try to start it. It is easy for the linkage to get out of adjustment, where it thinks the jeep is in gear. If that does not work, make sure you have battery power to the ignition and starter.

Dec 22, 2008 | 1998 Jeep Wrangler

Not finding what you are looking for?
1994 Jeep Wrangler Logo

Related Topics:

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...