Question about 1988 Ford F 150

1 Answer

I changed existing radio and have lost lighting to instument pane

I installed a new radio and lost lighting to the instument panel

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 60,775 Answers

U most likely blew a fuse, replace it, if the fuse goes again check the wiring to the radio refer to this wiring chart for color difinitions of radio wiring.

1988 Ford F150 Truck Car Radio Wire Color Codes
Car Radio Battery Constant 12v+ Wire: Green/Yellow
Car Radio Accessory Switched 12v+ Wire: Yellow/Black
Car Radio Ground Wire: Red or Black
Car Radio Illumination Wire: Blue/Red
Car Stereo Dimmer Wire: N/A
Car Stereo Antenna Trigger Wire: N/A
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: 6′
Car Audio Front Speakers Location: Doors
Left Front Speaker Positive Wire (+): Orange/Green
Left Front Speaker Negative Wire (-): Black/White
Right Front Speaker Positive Wire (+): White/Green
Right Front Speaker Negative Wire (-): Black/White
Car Audio Rear Speakers Size: 6′ x 9′
Car Audio Rear Speakers Location: Rear Corners
Left Rear Speaker Positive Wire (+): Pink/Green
Left Rear Speaker Negative Wire (-): Pink/Blue
Right Rear Speaker Positive Wire (+): Pink/Blue
Right Rear Speaker Negative Wire (-): Green/Orange

Posted on Dec 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

96ford ranger instumant cluster


There Is a hidden bolt under the wiper assembly on drivers side that will prevent you from removing panel if you've removed everything from inside

Nov 30, 2011 | Cars & Trucks

1 Answer

When I turn my lights on, the two turn signals stay on and none of the dash lights come on. The turn signals flash when you flip the lever left to right so i know the problem is not in the blinkers or...


sounds like an open to the lights in the instrument panel, if the lights work in the radio, ac panel, etc.

Or, all the bulbs burnt out at once (unlikely).

Maybe the harness to the instrument panel is loose, but only is accessible after removing the dash board.

Jul 11, 2010 | 2000 Ford Taurus

5 Answers

My clock light on my 2004 Subaru Forester won't light anymore. The dome light works so I know its not a fuse.


Is this for a 1999 Forester or for a 2004 forester, the title lists both years. If it is a 1999 model then the problem most likely resides within the clock itself. Unfortunately, many clocks of this vintage go bad over time. I offer a reasonable repair service and many clock removal instruction sheets at www.autoclockrepair.com
I'd be happy to assist.

Feb 25, 2010 | 1999 Subaru Forester

1 Answer

Audi a4 1995 1,6l no rpm in instrument and warning


If you've just had the instument changed then its probable that the connector has come loose and will have to be re-connected. It could also be that the instument has failed. Take it back to the mechanic who changed the old one. This assumes that the car drives ok and all the fluids are topped up and ok.

Nov 04, 2009 | Audi A4 Cars & Trucks

1 Answer

Ford galaxy 2004 instument panel lights not


You may have a faulty circuit in the instrament panel assembly, only further testing would prove or disprove my theory?

Oct 31, 2009 | 2004 Ford GT

1 Answer

1988 dodge daytona instument panel lights not working.


THERE IS A INLINE FUSE THAT IS CONNECTED TO THE BACK OF THE RADIO INSIDE OF WHITE PLASTIC FUSE HOLDER(RED WIRE)

Jun 07, 2009 | 1989 Dodge Daytona

1 Answer

Instument panel lights & tailights won't come on with headlights


Hello,   check the fuse in the fuse panel labeled PARK this may be it. 
...and also, just a question here, Have you recently had a radio or alarm installed?

Jan 21, 2009 | 1999 Chevrolet Corvette

1 Answer

Instument Guages


well the issue is youe enitre gauge cluster i do understand that your speedometer is working but it is a cable speedometer not electronic like everything else in the gauge cluster so first i would recomend checking the voltage getting to your gauge cluster then just replace the guagecluster they are really cheap i a salvage and not hard to install at all but the cluster itself is not very comon to go out so make sure you check voltage to it first i wouldnt want you to go through buying and replaceing the cluster and that not fix it

Jan 20, 2009 | 1991 Mitsubishi Eclipse

Not finding what you are looking for?
Cars & Trucks Logo

309 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...