Question about 1999 Jeep Grand Cherokee

1 Answer

Disarm malfunctioning alarm system jeep cherokee 1999

My alarm keeps going off randomly and the only solution seems to be keeping the key turned in the ignition...How do i completely shut the horn or alarm system down so it will stop? It's waking the neighbors!

Posted by on

  • rudycdamian May 06, 2009

    Can not disarm the system and keeps on alarming 'till the engine had started.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 99 Answers

Try to find a fuse and take it out it may have one just a guess

Posted on Jan 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

My 1997 jeep grand Cherokee alarm system keep arming itself about a minute after car is turned off even if car is unlocked with windows down can someone help


Speaking from prior experience, It's possible that the door lock latch assembly may need replacing usually the drivers side or the lift gate latch assembly. These are the 2 that can arm & disarm the alarm system. You may have a faulty switch in either of these. Hope this helps.

Jul 11, 2015 | 1997 Jeep Grand Cherokee

1 Answer

How do I disarm my 2011 jeep grand cherokee alarm? It keeps going off randomly and my remote doesn't shut it off


GOT OPTION "ENTER AND GO"???????????????
did you use both FOBS. car came with 2, try using both , one at a time and not both near car as SAME time. ever.

mines turned off for ever,
i never armed it.
so page what.
wow 6 owners manuals, 4 for Uconnect, wow. pain.
page 22. read that?
sure.
is this not clear ,quoted
The Vehicle Security Alarm is designed to protect your
vehicle; however, you can create conditions where the
Vehicle Security Alarm will arm unexpectedly. If you
remain in the vehicle and lock the doors with the RKE
transmitter, once the Vehicle Security Alarm is armed
(after 16 seconds), when you pull the door handle to exit,
the alarm will sound. If this occurs, press the UNLOCK
button on the RKE transmitter to disarm the Vehicle
Security Alarm. You may also accidentally sound the
Vehicle Security Alarm by unlocking the driver's door
with the key and then opening the door

good luck deciphering this page, wow.!
page 23 is NO ENTER AND GO', OPTION.
Either press the UNLOCK button on the RKE transmitter,
pull on the front driver or passenger door handle (refer to
"Keyless Enter-N-Go" in "Things To Know Before Starting
Your Vehicle" for further information) with a valid
key fob in range, or press the Keyless Enter-N-Go Start/
Stop button (requires at least one valid Key Fob in the
vehicle), or insert a valid Key Fob into the ignition switch
(if the Start/Stop button is removed) and rotate it to the
ON/RUN position.

END QUOTES FROM YOUR GUIDE.
if all this fails get jeep to fix it. (the magic is broken so...)
or ask them to explain, page 23 , in non GREEK..

Feb 27, 2015 | 2011 Jeep Grand Cherokee Laredo

3 Answers

How to permanently disarm alarm on 1995 Jeep Grand Cherokee Laredo


#1 solution for this is to " BUY A GM PRODUCT" & save your money on costly repairs of these chrysler & JEEP (amc) vehicles!

Apr 25, 2012 | 1995 Jeep Grand Cherokee

2 Answers

1999 jeep grand laredo will turn over and cut off after 3 seconds. A key with a circle will blink on the dash. I also need to keep it in shade, otherwise it will not stay on after turning over. Nothing...


it sounds like the anti theft security system is preventing it from starting,the only fix i know of is to manualy lock and unlock the passenger door a few times to clear the system then try to start the jeep with the original coded key.if the key is to worn then a replacement key should fix it,and you can order 1 from either the dealer or from the dealer online.or you could try this fix i found online ,Normally, you would insert the key in
the drivers door, turn left, then right
to disarm and reset it. If yours is malfunctioning,
you can disable it for good by doing the following:

The FACTORY ALARM DISARM WIRE IS
green/orange '-' in your case & is
Located in the drivers kick panel.

Once Located, splice into
(strip off a bit of the wires covering to expose
the copper on the wire) either wire with
a simular guage wire, and put it to
a solid chassis ground. Then tape it off.

This terminates
the alarm functions entirely.

Aug 05, 2011 | 1999 Jeep Grand Cherokee

2 Answers

How doyou disarm the factory alarm system in a 1994 jeep grand cherokee my alarm system keeps shutting down the whole car it is a real pain to get it started again i just want to totally shut the alarm...


The security alarm system on the 1994 Jeep Cherokee arms itself on any normal exit from the vehicle, i.e. ignition off, open door, lock door with power door locks, close door. If the doors are locked with the key, it does not arm.
If the battery is disconnected, then reconnected, the alarm system will go into powerup alarm mode. The lights will flash, but the horn will not blow.
The alarms can be disarmed by a keyless vehicle remote or by unlocking either of the front doors or the read lift gate with the key. If the key method does not work with any of those three entrances, there is a problem either with the input to the alarm module or the module itself.
There is a switch in both front doors and the tailgate which is activated by manualy unlocking those doors. The alarms can be disabled by permanently grounding the wire going from either of those switches to the alarm module, but this will remove all theft protection.
The best thing to do is to find out why the system is going off in the first place. It could just be a glitch, a loose connection that can be fixed fairly easily and keep your theft protection intact.

Glenn

Feb 23, 2010 | 1994 Jeep Grand Cherokee

1 Answer

ALARMS


Insert key into drivers door lock and turn the key to unlock

Nov 19, 2008 | 1999 Jeep Grand Cherokee

3 Answers

1999 JEEP GRAND CHEROKEE LAREDO


i have a 95 jeep grand cherokee lerado from time to time my alarm goes off i dont have a remote 4 my alarm but i found out that if you put the key in the driver door and unlock it. it will reset the alarm!!!!!

Nov 19, 2008 | 1995 Jeep Grand Cherokee

1 Answer

Disarming alarm system


if the horn is on and the light blinking with the alarm all what you have to do is close all the doors, then luck it and unluck it with the key on the drivers door.

May 27, 2008 | 1999 Jeep Grand Cherokee

Not finding what you are looking for?
1999 Jeep Grand Cherokee Logo

1,225 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...