Question about 1990 Geo Prizm

1 Answer

1990 Geo Prizm, 1.6 4 cylinder motor

How can I tell if I have a code 5 or code 6 engine?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

The vin is on the plate on dash by windshield driver side stand out side look down count 6 didgets this is your engine code if in dout engine s/n is left side of engone were head is mounted

Posted on Jan 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove water pump on 1990 geo prizm


old post
this is covered
in the FSM (factory service man.)
and at alldata.com
its 50 steps.+
no body here will type that out.
see here
http://www.fixkick.com/PRIZM.html

the engine is a TOY engine.

Jul 29, 2013 | 1990 Geo Prizm

1 Answer

Factory alarm on 1994 geo prizm


89-02
joint venture, GM/toyota with 3 engine used.
1.8L or 1.6L
toy engine, 4aFE, 7AFE or 4AG
open hood look
or use the GM RPO tag
or Use the VIN to find motor used.
for docs?
ebay
search
Geo Prizm factory service manual, Duh?

http://www.ebay.com/sch/i.html;jsessionid=D19D723C2EDB4A9FE12E7C01C0677129?_sacat=0&_nkw=geo+prizm+shop+manual&_nkwusc=geo+prizm+shop+manaul&_rdc=1

first read this. for your engine, and car.
you will see all its tie in points.
on some cars the ECU is defeated until the alarm (immoblizer)
tells ECU , all is good.
RTM
i do this for many people, and that is how i do it.
i RTM.

Feb 18, 2013 | Geo Prizm Cars & Trucks

2 Answers

Is the Prizm an interference type engine that would be seriously damaged if the timing belt breaks?


there are 3 engines, all made by toyota.
if it has a belt, some engines, are not free running.
find your engines. then go to gates belt do com and look it up
and see last column, "interference'?
or join a toy forum and ask there, after finding the engine code.
3 motors.
my prizm dump.
89-02
joint venture, GM/toyota with 3 engine used.
1.8L or 1.6L
toy engine, 4aFE, 7AFE or 4AG
open hood look
or use the GM RPO tag
or Use the VIN to find motor used.
for docs?
ebay
search
Geo Prizm factory service manual, Duh?

http://www.ebay.com/sch/i.html;jsessionid=D19D723C2EDB4A9FE12E7C01C0677129?_sacat=0&_nkw=geo+prizm+shop+manual&_nkwusc=geo+prizm+shop+manaul&_rdc=1

Feb 17, 2013 | 1990 Geo Prizm

1 Answer

Im trying to retrieve codes from a 1990 geo, prizm. Found no DLC under the dash. Is it under the hood? I found what might be the connection but i must input individual wires. I don't what wire color goes...


DIAGNOSTIC TERMINAL IS UNDER THE HOOD IN WHICH YOU FOUND. WITH IGNITION SWITCH ON POSITION USE JUMPER WIRE TO TERMINAL T AND E1 OF THE DIAGNOSTIC CONNECTOR.YOU NEED ECM CODE BOOK.THE CHECK ENGINE FLASHES WILL BE YOUR CODES.TWO FLASHES AND PAUSE THEN THREE MORE FLASHES IS CODE 23.THAT HOW YOU DO IT.TO ERASE CODES AFTER THE REPAIR.REMOVE NEGATIVE BATTERY CABLE FOR 1 MINUTE TO REMOVE CODE.

Jun 08, 2010 | 1990 Geo Prizm

1 Answer

Where is the timing marks on a 1991 geo pirzm? also what is the firing order?


97488ae.gif
1.6L SOHC (VIN Code 4) EngineEngine Firing Order 1-3-4-2Distributor Rotation: Counterclockwise

0be98bd.gif
1.6L DOHC (All 1988 & 1991-92 VIN Code 5)Engine Firing Order 1-3-4-2Distributor Rotation: Clockwise

eabc610.gif
1.6L DOHC (1990 VIN Code 5, 1989-93 VIN Code 6 & 1993 VIN Code 8)Engine Firing Order 1-3-4-2Distributor Rotation: Clockwise


ec1d0cd.gif

Dec 01, 2009 | 1991 Geo Prizm

2 Answers

Blower motor location 1990 geo prizm


In my 1992 it is underneath the dash on the passenger's side, but you have to take the whole front panel including the glove box off to access it. When that is done there is a rectangular housing and a more circular housing. On the bottom of the circular housing there are three screws that hold the blower motor up. Remove the screws and it will drop right out.

Dec 14, 2008 | 1990 Geo Prizm

1 Answer

Fan runs all the time when car is on


I did the same thing and had the same problem. I believe I replaced a ten amp fuse in the engine compartment and fixed it. Really pissed me off.

Oct 27, 2008 | 1990 Geo Prizm

1 Answer

Geo prizm 95' engine light on - code 24 - air intake temp. sensor has no power


use an electrical tester with a sharp point tip, and poke through the coating into the wire at every 5".

this is the best wat to test the wiring.

Sep 04, 2008 | 1990 Geo Prizm

1 Answer

1990 geo Prizm fuse location for the heater blower


the heater blower motor is run through two fuses. the gauge fuse in fuse block 1 and the ac fuse in fuse block 4.

Aug 28, 2008 | 1990 Geo Prizm

2 Answers

Location of fuel filter-1990 Geo Prism


Right under the master brake cylinder, its really hard to replace it. It has 2 screws, one bolt on top and the bottom one needs to be screwed off under the car

Aug 06, 2008 | 1990 Geo Prizm

Not finding what you are looking for?
1990 Geo Prizm Logo

Related Topics:

187 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...