Question about 2005 Ford F-150
I have a 2000 Ford F 150, my blinkers are not working but all other lights, hazards, break lights, etc are working. Blinker lights inside the cab are not working either. Local auto store sold me a flasher fuse, but I have no idea where it goes. Any ideas?? I looked in the owners guide but there is nothing said about just that problem. (fuses are listed with other items and nothing else is broken)
OK! Thank you Lord Jesus. I just fixed mine. This problem is most likeley the caused by trucks with tilt stearing. The harness is to shourt on some trucks and when the wheel is in the down position it will pull the plug on the harness that runs the blinkers. My emergency flashers worked if the wheel was in the up position. When I put it all the way down, they no longer work. First remove the tilt leaver by turning it counter clock wise. If it is to tight the is a small indent on it the you can use an small adjustable wrench on. Then remove three philips screws from the lower stearing wheel shaft cover. After the lower cover is removed pull the upper one up slightley and you will see many connections. The fist one to look for is very large top center. Mine was half way disconected. I pushed it back together but this did not fix my problem, but make shure yours is setted all the way just to make sure. Now look at the connection coming out the back of the turn signal. Mine was loose here also and when I pushed it together all the way my problem was solved.
Hope this keeps everyone else from getting hit or paying a big repair bill.
Posted on Apr 26, 2009
Most flasher are located on the fuse panel. They plug in.
Posted on Dec 27, 2008
Tips for a great answer:
Oct 07, 2011 | 1990 Mercury Cougar
May 19, 2011 | 2000 Volvo S40
Feb 03, 2011 | Mercury Grand Marquis Cars & Trucks
Dec 06, 2010 | 1996 Ford Taurus
Dec 16, 2009 | 2000 Ford Explorer
Oct 04, 2009 | 1984 Ford F 150
Sep 28, 2009 | 2006 Ford F-150
Sep 05, 2009 | 2000 Toyota Camry
Jun 18, 2009 | 2000 Ford Focus
Sep 04, 2014 | 2005 Ford F-150
323 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: