Question about 1996 Land Rover Discovery

1 Answer

I need to replace the fan belt. Which pulleys does it go around?

I have a 1994 Land Rover Discovery V8i, and the fan belt has snapped. I have a replacement, but I need confirmation of which pulleys to place the replacement fan belt round. Thanks for your help.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Hi there,

My brother in law and I changed it without taking anything apart except the fan cover, what you'll need to do is gently use a crobar to release the tensioner pully directly below the alternator, and jam it a bit, then slowly release the old belt, if it's as worn as mine was you'll be fine. Then simply run the new belt starting from the bottom up. There's a great diagram on the weblink below.

http://www.roverparts.com/TechTips/serpentine_belt_routing_D2.cfm

Posted on Feb 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine surging at idle and back firing when you accelerate on a 1994 Land Rover V8i discovery


Year make and model helps...Clean the throttle body and MAF sensor. Clean or replace the idle air control motor.(IAC)

Sep 17, 2016 | 1994 Land Rover Discovery

1 Answer

How to replace drive belt for power steering pump on discovery1 1993 v8i


Try this video:

http://www.youtube.com/watch?v=e8uojR0WZjU

May 16, 2014 | 1994 Land Rover Discovery

1 Answer

I have a 1994 Land Rover Discovery V8i, 5dr. The rear side lights in the light cluster do not work. There is a second row of lights on the bumper bar that do work. I have been told that with this model...


Hello! The 1994 models featured larger headlamps and a second set of rear lights in the bumper. The new rear lights had the wiring changed several times to meet real or expected European safety legislation. Some vehicles are left with an arrangement where the vulnerable bumper contains the only working lights. The rear side lights in the light cluster become non-operational...


Guru.......Saailer

May 18, 2011 | 1994 Land Rover Discovery

1 Answer

I need the serpentine belt routing for a 98 land rover discovery. 4.0 with air and everything. Thanks


The serpentine belt routing diagram for a 1998 Land Rover Discovery 4.0 liters with A/C

tdisline_9.jpg
CS = Crankshaft
F = Fan pulley
G = Guide pulley

Gen = Alternator
HP = Hydraulic Pump
T = Tensioner
AC = Air Conditioning
PAS = Power Assisted Steering

Nov 16, 2010 | 2001 Land Rover Discovery Series II

1 Answer

CAN I HAVE WIRING DIAGRAM FOR LAND ROVER DISCOVERY V8i


the easiest and in-expensive way would be to go to your local library. You should find what your looking for in the auto reference section. Or, you can buy the publications on ebay, at Auto Zone, or O'Reallies.

Apr 25, 2010 | 1998 Land Rover Discovery

1 Answer

What is the step by step procedure for fitting a newfan belt for a Land Rover Discovery 300 Tdi


remove top of fan cowling 2 clips draw a diagram of belt route put spanner on tensioner pulley bolt turn clockwise remove belt with assistant helping keep tensioner pulled back fit new belt over pulleys release tensioner onto belt refit cover

Jan 02, 2010 | 1995 Land Rover Discovery

1 Answer

New fan belt


Halfords, wilkos, partco, motofacts, rimmerbros or even ebay

Thanks

roversports.co.uk

Mar 30, 2009 | 1994 Land Rover Range Rover County

Not finding what you are looking for?
1996 Land Rover Discovery Logo

718 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...