Question about 2004 Ford F150

1 Answer

Yeah, we also tried that

Yes, we tried that and also noticed when we turn the ignition switch on, we could even hear the relay kick on...all relays seem to be working and it's feeding power to the fuel pump, I just cant figure out why once i start it, it's not getting fuel, and eventually dies. Especially if I push the throttle.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 409 Answers

OK check your MAF sensor. It works offa 5 volt reference signal. Use a DVOM (digital volt ohm meter) and not an analog meter. If you go to www.alldatadiy.com you can purchase a repair manual subcription good for 1 yaer for less than $20.00. Well worth the money. It will have all the test procedures there as well as wirinf diagrams, component locations TSB's and everything you need to know.

Posted on Dec 27, 2008

  • John Weathers
    John Weathers Dec 27, 2008

    If oyu need anymore help just get back to me OK. Glad to help!!!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the starter relay on a 1995 Mitsubishi Mighty Max PU


It sounds more like you have a bad connection somewhere or possibly a weak battery.

Mar 24, 2016 | 1995 Mitsubishi Mighty Max

1 Answer

It wont start I thought it was the starter sticking put a new one on it so then it started fine until this morning when I turn key over all I hear is one click on the fire wall on the passenger side then...


That must be the starter relay that is clicking. I know some Celica enthusiasts used to talk about old wiring in the starting circuit causing such problems-too much resistance in the old wiring and connections. Some of them ran new wire from the ignition switch to the starter relay and a new wire from the relay to the starter. One guy bypassed the old relay and added a new one just off the battery, with all new wires. He said it solved the problem.
I don't know if this is your problem. You could have something else, like a clutch switch that is erratic, maybe even the relay is failing. Try pulling the relay out and look for corrosion at the terminals-that could be the problem.

Sep 09, 2013 | 1986 Toyota Pickup 4WD

1 Answer

Fuel pump not engaging


did you check the fuse for it ??

if the wires and relay are good that's the second part of the circuit..the first part is the one that triggers the relay from the ignition switch.. you will need to check that..

you can also bypass the relay and connect the pump directly to the battery to get the car home or to a shop, just remember to take out the wires after,

the problem I'm thinking is in the ignition switch. it could be the wires or a faulty switch this needs to be checked,, to do this, Pull the cover of the relay, you will notice a coil and 2 contacts.. turn the ignition on, press the contacts together and try starting now, if it starts it means its the ignition switch.

ps don't forget to rate this if you found it helpful as it can be of help to others as well.

Dec 30, 2012 | 2002 Chevrolet Blazer

1 Answer

My dodge ram 1500 will not start. when you turn the ignition nothing happens. all the panel lights come but none of the guage hands move . could it be the ignition switch?


yes, or the relay. Look in relay box under hood. Ignition relay should click when key is turned on. If not, replace relay. Much cheaper than a switch. May still be the switch, but relay is worth a try.

Sep 12, 2010 | 2004 Dodge Ram 1500

2 Answers

I have a 06 ion and battery checks good but the car will not turn over at all, not even a click. could this be a bad starter or starter relay?


If only clicked then I'd say bad neutral safety switch but with no click which is a relay then you may have an ignition switch problem. That's in the steering column coming from the key ignition or the starter relay is fried.

Sep 05, 2010 | 2006 Saturn ION

2 Answers

1994 isusu the dash lights and the rear tail


My 97 Rodeo had the same problem. No Tail lights, no. Dash lights. There is also an annoying buzzer that goes with the set telling you the lights are on, there is no key in the ignition and your door is open. (you don't notice it when it's gone but you sure notice it when it's back)
The Fuse (taillight Illum) was good, The Light relay under the hood was good and all bulbs were good.
What fixed this problem was replacing the tail light relay which is located in a panel just to the left of the brake pedal also called the kick panel.Inside there are 3 relays. I replaced the one in the middle and got everything to work.
If you need to identify the relay you can put your hand over it and then turn the lights on and off. The correct relay should click. Mine was the middle one.
Hope this helps someone because it stumped me for months.

Jul 30, 2010 | 1997 Isuzu Rodeo

2 Answers

Buzzing fuel pump


sounds like the fuel pump relay is stuck on. find the relay and replace it. hope this helps mike

Jun 16, 2009 | Acura TL Cars & Trucks

1 Answer

1993 mercury tracer has me stumped


Well when you turn the keys on the pump will only run for a few seconds A test light works ok but i would use a volt meeter at th efuel pump power and groung wires and measure the voltage while cranking the car

Jan 18, 2009 | 1994 Mercury Tracer

Not finding what you are looking for?
2004 Ford F150 Logo

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...