- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
? 2:09 www.youtube.com/watch?v=Z7vM78b5cOw Jan 15, 2010 - Uploaded by Lim Lai Aik
my instrument panel lights not working.how can I change the bulbs? thanks ... 1972 Mercedes-Benz 600 Kompressor - Jay Leno's Garage - Duration: 18:56. by ... How to convert Mercedes R129 SL ,w124 dash gauge lighting to LED ... Part 1/5 Mercedes S-Class W220 Instrument Cluster Repair - Duration: ...
All instrument panel lights or just speedometer light? There are several bulbs behind instrument panel. More than likely, the bulb at speedometer is burned out, and can be replaced by removing instrument panel and replacing bulb(s). Hope this helps.
If the are not working you need to take the instrument panel out and twist the bulbs out. befor you buy take the ones out that are working and put them in the place where they are not. If they work then you know it is just a bulb or lamp. Now since you have it out replace all of the lamps
Take out the screws holding the instrument panel in, pull it gently away from the dash being careful not to unplug or pull out any wires. there should be a plastic retainer that you and pull off to get at the bulbs.replace the blown bulbs and reinstall the panel..
Depending upon which light is out. You will have to remove the instrument cluster from the dash, disconnect the electrical connectors from it and then you can replace the defective bulb. When you first remove the instrument cluster while your connectors are still connected to it, turn your lights on for a second this may help you identify the bad bulb. If you replace the bulb with a new one and it still doesn't work then you have another problem. The circuit board to the cluster could be bad. But once you remove the bulb you will see if it's blown or not. Hope that helps, gl.
you need to buy two light bulbs from any parts store. I believe part number is 194 for the bulbs. Remove the instrument panel from the vehicle by popping the bezel loose and removing retaining screws. Once screws are out remove the instrument panel and remove the bulbs and replace them.
You need to remove the instrument panel and replace the blown bulbs.
Remove the steering wheel and lower facia panel and then reach up behind the instrument panel and push it out of the facia.
NB. Disconnnect the battery and wait for 15 mins. before removing airbag from steering wheel.
Torque setting for steering wheel nut is 80 Nm or 59 lb f