Question about 2001 Dodge Ram 2500 Truck

2 Answers

2003 dodge ram 2500 truck won't start engine lights is on

Engine light is on cranks but no start.no smoke,code p0193 and p0251 came on been to many dealers noone knows why. It use to start good after 3 cranks, then if it sat won't start again.now wont start at all.

Posted by on

  • 5 more comments 
  • lonlydancer Dec 27, 2008

    diesel cummings engine , tried spraying the throttle body opening

  • scribble_00 Mar 06, 2009

    I have 2000 Dodge Ram Diesel Cummins engine.....i put the key in the ignition, turn it, hear the pump go on...but the engine will not crank!..battery is in great shape and FULLY charged...lights work and electrical works fine....when i turn the key, there is a light click where the fuse box is, a blue chip or fuse just clicks one when i turn the ignition. I tried starting the car with a screw driver touch both poles on the starter and the engine turns...so between the ignition on the wheel and the starter is where my problem is???...or somewhere in the computer??...any help or ideas?

  • Mike Butler
    Mike Butler May 11, 2010

    Can't pinpoint codes at this time, but think P0251 is fuel injection pump related. Have you tried starting it with WD-40 sprayed in throttle body opening just to test if it will fire & run briefly?

  • Anonymous Mar 23, 2014

    when i start my truck i get a little blue smoke forty two thousand miles

  • Anonymous Mar 24, 2014

    I have a 2003 dodge ram 2500 5.9 diesel. It cranks fine but will not start. It will start with using starting fluid and does idle and run good, but just does not want to start on it's own.

  • Anonymous Mar 31, 2014

    truck cranks but wont start

  • Anonymous Mar 31, 2014

    The truck was running good but it died when turning into a parking lot. Now the truck does crank but will not start.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Ck crose tubes

Posted on Feb 11, 2013

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

I had the same problem last year in my 04. unfortunately it turned out it was my pcm. i paid 90 bucks and the dealer uploaded a new program on it and it has ran better than before because dodge has an updated program they loaded. hope this helps

Posted on Dec 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just bought. 5.9 cummins Can`t get it to start without pushing gas pedal slightly. Runs good after warms up. Still have to give it fuel to start.


Numerous Conditions May Cause Engine to Crank But Not ...

repairpal.com > Problems > Dodge > Ram 2500
2006 Dodge Ram Laramie 2500, 5.9i liter Cummins ... I know in the old days the dodges had a way about starting up an engine and that would be where.

White smoke, rough idle at startup - Dodge Cummins Diesel Forum

www.cumminsforum.com > ... > 3rd Gen. Powertrain
Jun 5, 2010 - 9 posts - ‎7 authors I have an 06 Dodge 5.9L that has a light white smoke and rough idle when first ... 2006Ram 2500 QCSB 4x4, 3" Carli coils w/ 1" Daystar spacer, ... Still ran good tho, dispite the exact conditions you describe on Cold Start up.

Oct 20, 2015 | 1995 Dodge Ram 3500

1 Answer

Reverse lights dodge ram


p1652 this code is for engine ecu for light code start B -XXXX BCM body control module for your light check wiring or check bulb and bulb make match to the vehicle

Apr 13, 2014 | 2005 Dodge Ram 2500 Truck

1 Answer

Engine turns over but will not start.


Hi there:

When the light comes on, one or more diagnostic trouble codes (DTC) are stored in the engine control module. These DTCs remain even if the light goes out. To address a Check Engine Light problem, the DTCs are retrieved and the appropriate troubleshooting information is followed in order to determine the problem.


Just scanned the computer and send us code number find it.

Hope helps.

Mar 14, 2012 | 1995 Dodge Ram 2500

1 Answer

2004 Dodge Ram Diesel. Check engine light comes


You will need to have a diagnostic test on this vehicle which will then provide you some error codes.Then once you get the error code you can start looking where the fault is.Hope this helps.

Dec 08, 2009 | 2004 Dodge Ram 2500

1 Answer

Check engine light stays on - 2006 Dodge Ram 2500 Cummins


Go to Autozone, they will check your engine codes for free.

Sep 23, 2009 | 2006 Dodge Ram 3500 Truck

1 Answer

While driving it died.... engine light is on, but it wont start back up


if the check engine light does not go out when cranking, this means you have no rpm signal, you should then try to replace the crank sensor an seewhat that does

Aug 04, 2009 | 2001 Dodge Ram 2500 Truck

2 Answers

2003 Dodge Ram 1500 Fuel Gauge drops to empty while driving.


I have the same problem on my 2003 Dodge Ram 2500 5.7 Hemi. Also the gauge is sometimesslow to register after filling. Maybe 5 minutes.My neighbor has the same poblem with his 1999 Durango? I think this is a job for a recall.

Mar 23, 2009 | 1998 Dodge Ram 2500 2WD

4 Answers

2004 dodge ram 2500 5.9 diesel hard to start


The lift pump is bad Check the fuel pressure with a test gauge.

Jan 04, 2009 | 2004 Dodge Ram 2500

1 Answer

Dodge ram 2500


If the engine light remains on constantly then there is a code set telling you what the problem is. I suggest you find a mechanic who can read the code telling you the problem. It may not be noticeable to you but may cut your mileage or may be harming other sensors or parts.

Oct 09, 2008 | 1995 Dodge Ram 2500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

785 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...