Question about 1991 Buick Park Avenue

1 Answer

Oem Radio installation

I found the OEM radio to my 1991 Buik Park Ave when I went to install it the car has 14 wires and the radio has 17 wires , any help on installing the radio? I was not able to find the wiring diagram.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 379 Answers

*** 91 park ave with delco bose =

black = ground
dark green = lights on input
grey = panel lights
pink = on input
yellow = power input
orange = battery power input

nca = shield ground
tan = left fr spkr +
orange/black = left & right spkr -neg
lite green = right fr spkr +

nca = shield ground
dark blue = right rear spkr +
dark green/yellow = right & left spkr - neg
brown = left rear spkr +

purple/white = display dim output
pink = vehicle speed input
**** 91 park ave without delco bose =

purple/white = display dim output
pink = vehicle speed input

grey = left front - neg
tan = left front + pos
dark green = right front - neg
light green = right front + pos

black = ground
dark green = display dim signal
grey = panel lights
pink = power antanna
yellow = ign input
orange = battery power
light blue = right rear - neg
dark blue = right rear + pos
yellow = left rear - neg
brown = left rear + pos .

there YA go

Posted on Dec 31, 2008

  • Rick Byrd
    Rick Byrd Jan 03, 2009

    follow up - was this information worth a FIX YA vote ? thanks for voting ! .



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I fix the clock display on my 1999 Pontiac Sunfire?

It appears to be that the radio clock display has malfunctioned, and is due for a replacement radio, which could be an aftermarket or oem radio, maybe found at a junk yard.

Tools required for oem replacement radio, torx keys set.

Before working on the radio or other electronics, disconnect the battery cables with 8mm wrench.

Replacing the oem radio is much easier, if you obtain oem radio, compared to aftermarket radio, due to being direct fit.

The radio is same for 1995 to 1999 Pontiac Sunfire and the Chevy Cavalier, regardless of sub models, such as SE,GT, VL,VLX,Z24. etc.

Parts needed for the the aftermarket radio install :Stereo assembly, stereo wiring harness adapter, radio antenna adapter, and dash install kit.wiring diagram for the wire colors / functions, along with tools, such as torx key set, screwdrivers,wire crimper, wire stripper, double ended wiring connectors, hair dryer.

The oem stereo removal video is for the 2000 to 2005 Sunfire / Cavalier, but are the same or very similar procedures.

Link to oem stereo removal procedures.
Pontiac Sunfire Radio Repair and Removal 2000 2005

Link to aftermarket stereo install / connect procedures. ( Sunfire Video )

Link to aftermarket stereo install / connect procedures. ( General Video )
How To Install Car Stereo Single Double DIN Car Audio 101

Have a nice day.

May 12, 2015 | 1999 Pontiac Sunfire

1 Answer

On a 1992 buik park ave were do i loke to find the starter masual

Here's a link to starter,you can follow positive battery cable,it's connected to the starter. Repair Guides Engine Electrical Starter AutoZone com

Oct 12, 2014 | Buick Park Avenue Cars & Trucks

1 Answer

Wiring for radio

generic wiring schematics seldom match the OEM wiring as to get the diagram the book publishers have to virtually strip down a vehicle as the diagrams are copy write protected. IN many cases the manufacturers of the vehicles change wiring harness suppliers and the OEM schematics will vary to your vehicle. When in doubt take it to an installer and have them fit it as diy people generally install incorrectly and produce faults in the CPU program

Mar 09, 2014 | 1998 Saturn SL

1 Answer

How to install starter relay for 1991 park ave


Fig. 1 Starter mounting
  1. Disconnect the negative battery cable.
  2. Raise the vehicle and support safely.
  3. Disconnect the wiring from the starter.
  4. Remove the flywheel shields.
  5. Remove the starter retaining bolts and remove the starter from the engine.
To install:
  1. Position the starter against the engine and install the bolts. Torque to 35 ft. lbs. (47 Nm).
  2. Connect the starter wiring.
  3. Install the flywheel shields.
  4. Lower the vehicle and connect the negative battery cable.
  5. Check the starter for proper operation.
Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

Nov 22, 2011 | 1991 Buick Park Avenue

1 Answer

Bought a new radio and had somebody put it in .it started to drain my battery down,now i need a boost off every time i get ready to go so i just got a boost off and now my car will not go forward .i...

the park ave wiring is really easy to screw up when you install an after market radio,
i would have the radio taken out and disconnected and then see if the car goes forwards
also check all of your fuses in the 2 fuse boxes under the hood and the one under the dash and see if he blew any when installing the radio

Sep 19, 2011 | 1999 Buick Park Avenue

1 Answer

Want to know how to install wheel bearing on 1991 buick park ave

I have the same problem few days ago, and still didn't find any solution. Can any one please help?????5

Jul 28, 2011 | 1991 Buick Park Avenue

1 Answer

My oil psi is around 14 in my 1998 buik park ave what could it be

Any one of several things, hopefully not excessive wear on a bearing (crankshaft, camshaft, etc) The relief valve on the pump may be leaking or the spring has weakened, the oil pump has excessive wear on the rotors, most likely the sender unit or gauge is faulty (we hope). Good luck.

Jan 17, 2011 | 1998 Buick Park Avenue

1 Answer

Can you get an iPod interface for the OEM installed radio?

as there is no plug on the oem radio for such a wire(interface)why dont you buy a fm transmitter for you ipad???????(mp3 players have them.......)

Jul 02, 2010 | 2003 Suzuki Grand Vitara

1 Answer

I have Buick Park Ave. 1991. Automatic trunck

There is a motor on the bottom latch that goes bad. Make sure that the fuses are all good. They can be found on the driver's side left of steering column. On the cover if you flip it over will have a list of the fuses and what they go too. If they are all good, the motor is most likely at fault.

Dec 29, 2009 | 1991 Buick Park Avenue

2 Answers

1991 Buick Park Ave sunroof switch connections, came apart while installing radio.

The wires are as follows.There are small letters on the connector that are a,b,and c.A wire is white,b is orange, and c is brown.I believe this is the info you are looking for.Your description is not very plain.If not then post back on add comments and I can help you more.Hope this helps.Good luck.

Dec 28, 2009 | 2005 Buick Park Avenue

Not finding what you are looking for?
1991 Buick Park Avenue Logo

672 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts


Level 3 Expert

77939 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides