Question about 1992 Mercedes-Benz E-Class

1 Answer

When i turn the engine on at the first time in the day ( just the first time ) it takes more than 8 seconds to do it??

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 393 Answers

Try cycling the key on and off 4-5 times before starting

Posted on Dec 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Occasionally, about every 6 to 8 times tried, the engine will turn but not start. If I turn the key off for about 3 seconds, it usually starts within a few turns. Do you know what can cause this?


A year, make, model, and engine size would help but I will through this at you.

Instead of just trying to start the car turn the key to the run position and wait 3 seconds. Turn the key off and immediately turn the key back to the run position and wait another 3 seconds. Turn the key off then try to start. Do this every time you try to start the car. If you symptom never occurs when you start the vehicle like this than I would suggest taking a closer look at the fuel system.

Oct 10, 2016 | Cars & Trucks

1 Answer

EVAP control system problems - P0440 and P0456 codes


1) Determine the engine code cause for the Check Engine Light (C.E.L. or CEL)
2) Insert key into ignition
3) turn key to "on" posittion without starting the vehicle
4) VERY VERY quickly turn the key off one click, then on, then off, then on; cycling for 3 turns of the key (NOTE: you might have to try this a couple of times to get it just right)
5) leave on, and read the engine diagnostic code(s) that are output in the mileage counter
6) We got Code P0440 (or P 0440 or P-0440) (variations inserted for search engines)
7) A quick search of the web yielded about 3 or 4 usefull details.
8) Diagnostic code P0440 is the Evaporative Emissions Control System Malfunction (failure) of some type. Details of this type of failure and what the Evap System does for you:
9) Other web pages indicated it might be as simple as the Gas Cap being seated incorrectly, or not sealing correctly any more
10) I took it off, yes it was seated incorrectly, and reseatted it firmly
11) Now you need to clear the Check Engine Light indicator (it will clear *eventually* over time if this is TRULY the problem - I recommend you clear it now - that way is a deeper problem with the EVAP system exists, it should come on again - giving another clue something else is amiss
12) One suggestion was to take the Negative (black) cable off the battery for 10 to 20 seconds -- I did - for 30 seconds to be sure
13) You *must* turn the Engine on and start the vehicle all the way before the Check Engine Light might clear - if it doesn't try the following:
14) Turn the ignition on 50 times - yes - 50 times - but be careful, every time you cycle the ignition on (without starting the vehicle) you are turning on the Fuel Pump - continuous cycling can theoretically (according to some posts) cause it to heat up and be damaged - so every 10 times stop and let it rest for a full minute to cool down.
15) After 30 times of doing this (3 sets of 10), turn the engine fully on - see if the check engine light goes off) if it doesn't, do the remaining 20 times (2 sets of 10).
16) if it still doesn't go off, you may have a deeper issue that might require attention of the mechanics

Oct 05, 2008 | 2003 Chrysler PT Cruiser

2 Answers

If my jag has been sitting for more than 24 hours the first time I try to start the engine takes maybe 8 or 9 cranks before it will start, after this she starts quickly.


Sounds like the engine oil is quite thick when cold so you probably need to check the last time the oil was changed along with the filter.once it gets slightly warm the engine takes less cranking amps to turn over so it will start quicker.

Apr 20, 2015 | Cars & Trucks

1 Answer

How to program a bcm on a 2000 buick century


You can program it with or without a scan tool
Without a scan tool.This procedure will take 30 minutes.So make sure battery is fully charged 1.Turn the ignition switch off.2. Turn the ignition switch all the way from the off to the start position , then leave it in the on position. Note: The engine will not crank,3. The security light will come on and stay on for at least 10 minutes. 4. Turn the ignition switch off for five seconds. 5.repeat steps 2,3 and 4 again for a second time. 6. Repeat steps 2,3 and 4 again for a third time. 7. Turn the ignition switch off. 8. Turn the ignition switch all the way to the start position .The engine should now start. 9. Check BCM for any codes

Mar 06, 2012 | Cars & Trucks

1 Answer

The owners manual says for setting the timing is at 8 degrees,When using the timing light, What mark is 8 degrees?


The engine turns clockwise, the first mark is tdc (top dead centre) and the second mark is preset at 8 degrees so when using a timing light line up the second mark on the pulley with the fixed mark on the timing cover at idle

Aug 10, 2010 | 1996 Nissan Sentra

1 Answer

My 1994 Chrystler Concorde will not start in the morning. I feel like I do not hear the fuel pump come on and when I do it will then start. Should I replace the fuel pump or something else?


If the car sits for two days or more will it start with little issue? I only ask this as I noted the year of your car; with time the fuel injectors will leak. Over night the engine can then flood but once we turn it over for a time or two and then walk away we allow the fuel to evaporate out of the cylinders letting the car starts. If this is the case try starting the car with the gas pedal fully pressed. Keep it fully down as you try to start the car (this shuts off the fuel injectors) turn over the engine 5-8 seconds (keep the pedal down) and then wait 10-15 seconds before trying again. Remember to keep the gas pedal down, try this 6-8 times to see if she'll start (if it does let go of the gas pedal not to over rev the engine) If this is the case you'll need to have your injectors replaced.
I hope this may have helped,
Tom

Oct 19, 2009 | 1994 Chrysler Concorde

2 Answers

How do u make sure u r on top dead center


remove no 1 spark plug and insert a long screw driver (make sure it cann't drop into cylinder ) then turn engine over by hand carfully when the screw driver is at it's highest point thats tdc

Sep 09, 2009 | 1999 BMW 323 Series

1 Answer

Check Engine


The light went out the second day, I’m taking it into the dealer for service mon dec 8, 2008, I did see the brake and radiator fluid to be low, (must remember to buy some at the dealer to keep in my garage) also I have seen small spots on the garage floor on the passenger side forward, I will also have it checked out at the same time. (Who knows! to be continued)

Jack Stravage
Bay Terrace Queens NY
"Those who don’t hear the music think the dancers mad"

Dec 06, 2008 | 2008 Volvo S60

1 Answer

Engine won't start first time, but will after short pause on second attempt


try this turn key on but don't crank count to five and do it once more now turn key off and then start if it starts right up by doing this the fuel pump is loosing it's prime it has a check valve in the pump that sticks

Oct 18, 2008 | 2001 Chevrolet Silverado

Not finding what you are looking for?
1992 Mercedes-Benz E-Class Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

164 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...