Question about 1999 Dodge Durango

1 Answer

98 dodge durango dims wont work all other lights work 2 new switches fuses good and and new bulbs what to do

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I had the same problem in another vehicle. It turned out that the problem was the switch. Lights and turn signals were all in same unit, and the whole needed replaced to fix the one.

Posted on Dec 28, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

01 dodge durango. brake lights wont turn on but running lights work. replaced the pedal switch but no go. what do i do?

check the plug where the bulb plugs in , make sure wires are all tight and have good connections, make sue inside plug is dry and clean..

Feb 06, 2013 | 2001 Dodge Durango

2 Answers

98 Dodge durango SLT 4X4

there is a switch on the transmission that the power goes through to backup lights if switch is bad on trans lights won't come on

Jan 22, 2010 | 1998 Dodge Durango

1 Answer

I have a 98 dodge durango back up lights and heater don't work

Check the plug it self on the back up light, when you take out the bulb there are two copper "prongs" that stick up to make contact to the bulb to make them light up. Make sure those "prongs" are making contact with the bulb.

Dec 15, 2009 | 1999 Dodge Durango

2 Answers

Brake lights on my 98 Durango won't light up brighter

if the brake lights work but are not very bright means they are not getting the full amount of voltage to them. the circuit board in the tailight could be bad or corroded not letting power get through also could be in the brake light switch.

Aug 28, 2009 | 2002 Dodge Durango

1 Answer

Brake lights won't work in our 2001 Dodge Durango after changing

I assume you've checked the fuses and relays inside your car and the ones under your hood....

If you look above your brake pedal, you should see a switch connected to some wires. This is your brake light switch that controls your brake lights. It sounds like this may be faulty...If you find out that this switch is good.. then it could be your electronic flasher module, but not as likely

Aug 20, 2009 | 2002 Dodge Durango

1 Answer

98 Dodge Durango parking lights don't work!

sounds like you could have a loose connection somewhere in the wiring at the parking lights.. check the blub housing to make sure all the tabs to hold the bulb are there,,, wiggle the wires a little and see if they are broken loose... also check the grounds... see if any are loose or broken..

Dec 18, 2008 | 1999 Dodge Durango

1 Answer

2000 Durango, Headlights went out (both), turns, hgh beams work

if the high bam headlamps work it is not the headlamp switch itself but it could be the multifunction switch

Nov 13, 2008 | 2000 Dodge Durango

Not finding what you are looking for?
1999 Dodge Durango Logo

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

71338 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7018 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides