Question about 1991 Subaru Legacy

1 Answer

Have plug wires none in car which go where?

Took all wires off when I was mad got new ones I know the firing order which wires go where?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Subaru Master
  • 1,779 Answers

Hey chinagirlsgi, as u know, firing order is 1-3-2-4 _______ front of| 1 3 | car |__2___4 | hope this fancy art work makes sense, if not let me know!

Posted on Dec 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2003 buick century spark plug wire sizing chart


I doubt very much if you will get a HT length chart to help you, but if they are all various lengths, it usually goes that the longest to the furthest plug working back to the shortest in the firing order.
leads should sit comfortably without strain or being too loose
use lead spacers to keep the leads from touching each other or you run the risk of a misfire as the spark is induced into the lead with the less resistance ( induction stroke where there is no compression)

Jul 03, 2016 | 2003 Buick Century

2 Answers

I have a 1998 VW jetta I'm trying to change the spark plugs. I know the wiring order and the firing order. I just don't know how to tell if the engine is in the right position to be lined up with the...


If your trying to change spark plugs remove one wire from a plug, replace that plug, reinstall the wire onto that plug and move on to the next plug. You don;t need to worry about firing order unless you plan on changing the wires or the cap and rotor. Even if you where to change the wires if you did them one at a time than the new ones would be in the exact same place as the old ones and there is nothing to worry about,

Jan 18, 2011 | 1998 Volkswagen Jetta

1 Answer

Firing order. took the spark plug cables off and don`t know where they go back


First,look at the coils see if the towers are numbered.Each coil fires 2 cylinders!
look on intake manifold for fireing order display! The v6 engine fires from one bank across to the other in a straight line example,cylinders 1&2 3&4 and 5&6 at the rear of the engine or farthest right side. 1&2 left side faceing engine 3&4 in the middle. All you need to do is find cylinder # 1 hook up the # 1 wire to the # 1 coil tower to the # 1 plug or cylinder,follow the fireing order 123456,its simple if you cant see coil tower numbers look at another car with same engine that has distributor less ignition.The coil pack for the 4 cylinder gm has plug wire terminals or towers numbered as well.Only in a harder place to see like behind and underneath!

Sep 08, 2010 | Buick Skylark Cars & Trucks

2 Answers

I took of*** my spark plug wires working on my small block 350 pickup and I don't remember the the firing order to put the new wires back on. Is there a diagram anywhere or is it even that difficult to...


Next time number each lead before you remove it and no. the dissy cap as well

The firing order, which should be cast into the intake manifold, for the chevy small block V8 is 1-8-4-3-6-5-7-2. The firing order is the numerical sequence in which the spark plugs are fired. The insertion position of each spark plug wire around the circumference of the distributor cap can be found according to a clock face. The insertion sequence determines the firing order. The firing order is followed clockwise around the distributor cap starting from the 6:30 position with the 6:30 position being the number one cylinder spark plug wire.
On classic chevy small block engines that use ignition breaker points instead of electronic ignitions, the number one cylinder is the one immediately clockwise of the small metal sash cover on the distributor cap. The firing order starts here. There is no sash cover on the distributor cap for GM HEI electronic ignitions, and the firing order is the same, but starting at the 5:30 position.
The firing order makes sense if you know how the cylinders are numbered. The number one cylinder is the front most on the drivers side and 2 being the front most on the passenger side. From front to back, the cylinders are odd numbered on the drivers side, and even numbered on the passenger side.
See the diagram; Click to open a printable larger image in a new window. The firing order starts with the number one cylinder. We would connect the number one spark plug wire to the distributor cap terminal in the 6:30 position. distributor.pngSince the next cylinder in the firing order is 8 (passenger side rear), we connect the number 8 spark plug wire to the next distributor cap terminal (approximately 7:30 position) in the clockwise direction from number one. You need to be sure you continue the firing order in the clockwise direction around the chevy small block distributor cap from the last installed spark plug wire. Setting the rest of the firing order is just a matter of repetition. Be sure to count the spark plugs from front to back on each side of the motor to identify the correct cylinder number in the firing order.

Jun 21, 2010 | Cars & Trucks

1 Answer

Firing Order diagram for 2006 Ford Explorer


Hope this helps. The ignition coil:
  • changes low-voltage pulses from the PCM to high-voltage pulses.
  • fires 2 spark plugs simultaneously.
  • has 3 transformers.
    • One transformer fires the spark plugs for cylinders 1 and 5
    • One transformer fires the spark plugs for cylinders 2 and 6
    • One transformer fires the spark plugs for cylinders 3 and 4
Spark plug wires:
  • carry high-voltage pulses from the ignition coil to the spark plugs.
The spark plugs:
  • change high-voltage pulses to spark at the gap, which ignites the fuel and air mixture.
The firing order is 1-4-2-5-3-6.

69efa96.jpg

Jun 06, 2010 | 2006 Ford Explorer

1 Answer

I changed my dist. cap on 1990 chevy p/u took one


Is the coil connected to the ditributor? did you knock any connections off in the process? Does it turn over but not fire? do you have spark at the plugs? Are you sure of cylinder location in respect to firing order? Did you-and check this first as with any elec. problems-blow a fuse in the ignition circuit? good luck!

Jan 01, 2010 | 1990 Chevrolet C1500

3 Answers

Engine light keeps comeing on mecanic change o2 senser worked for half hour came back on cods keep saying its miss fireing have had this problem for a month know


Start Small work to Big = Saved Money!
The Code(s) should be telling the specific cylinder(s) that are misfiring. Do you know waht the code is?
Target those cylinders 1st before testing the unaffected cylinders.
The following should isolate the problem(s).
1. Spark plugs - take out-reconnect back to wires and test spark plugs for getting sparks. If none: Don't replace them yet. GO TO 2. If the spark plugs are worn, dirty them replace them.
2. Remove spark plugs form end of ignition wires and test for spark from the wire. If none: Don't replace them yet. GO TO 3.
3. Remove the wires from the coil connection and test the coil for spark for each cylinder. If none: Don't replace it yet.
4. Test each spark plug and wires this way.
5. Coil Packs normally provide fire for 2-cylinders at the same time. The two are paired across from one another.
6. Test the coil for fire, amount of fire and if there is both cyclinders firing.
Misfire and the O2 Sensor got replaced??
Good Luck and get back with me if you need additional help or if this solved the problem.

Nov 20, 2009 | 2004 Dodge Intrepid

1 Answer

Im changing the wires on my f150 4.2L v6 2wd. now im not sure what order my wires went. i tried to do it one at a time. but i did sumthin wrong, cause when i got to the last wires i needed a small wire and...


The COIL PACK TOWERS are numbered : coil----3---4 pack---2---6 plug----1---5 ----------------------------------------------------------------- The engine cylinders / spark plugs are numbered : passenger side , front to rear , 1 , 2 , 3 -----drivers side , front to rear , 4 , 5 , 6 ------------------------------------------------------------------- The spark plug firing order is ( 1 -4 - 2 - 5 - 3 - 6 )

found this online hope it helps

Nov 07, 2009 | 1999 Ford F150 Regular Cab

Not finding what you are looking for?
1991 Subaru Legacy Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...