Question about 2002 Pontiac Aztek

2 Answers

I am changing intake gaskets and need the torque specs. for the rockers 2002 pontiac aztek 3400

Posted by on

  • 1 more comment 
  • jcp029 Dec 27, 2008

    Thanks guys very helpful.

    jcp029

  • Anonymous Mar 29, 2014

    what engine filters should be changed

  • Anonymous Mar 29, 2014

    ITS THE FUSE BOX ON THE FRONT PASSENGER SIDE OF 2002 PONTIAC AZTEK. I NEED THE DESCRIPTION OF THEM NOT ABBREVIATION

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 124 Answers

89 inch pounds then 30 degrees. make sure the push rods get put back in same place they came out they are different lengths. If you ever do another one of these buy the tool for the rocker arms and you will not have to remove them or the rear valve cover. please rate

Posted on Dec 27, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 393 Answers

28-32ft.lbs. make sure not to mix up push rods i think they are different lengths on that engine

Posted on Dec 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rocker arm torque spec and intake manifold torque spec and pattern


I could not answer this any better than what I have found online. Here is a guy that has posted removal and re-installation in great detail as well as great photos.
LIM and Head Gasket Change Walkthrough FAQ GrandAmGT com Forum

I give all the credit for this answer to the poster.

Sep 12, 2014 | 2002 Pontiac Grand Am

1 Answer

Hello I looking for intake manofold torque for my pontiac montana 2000


remember new head bolts also, torque to yeild bolts. i would recommend to get a service manual for torque specs and procidures for removal of heads. also head gaskets are leaking for a reason have heads checked for straightness and for cracks at local machine shop, keep all pushrods and rockers numbered for reassembly, pushpods are different and will cause major engine damage if mixed up.

Dec 14, 2010 | 2000 Pontiac Montana

1 Answer

Oil in anti-freeze


That is not a good sign. These are a few ways this can happen. Bad head gasket, bad intake manifold gasket, cracked or warped head, or a cracked engine block. If the intake manifold gasket hasn't been replaced yet, have it checked for leaks. The 3100 and 3400 V6 engines are prone for intake gasket failure.

Jun 06, 2010 | 2002 Pontiac Aztek

1 Answer

Need head bolt,intake upper and lower and rocker arm torque lbs.


Head bolts--------- 22 ft lbs.
Intake upper------ 18 ft lbs.
Intake lower------- 10 ft lbs. Tighten vertical bolts first, the diagonal bolts, failure to do this will result in an oil leak.
As far as the rocker arm bolts, they have to be adjusted with the valves closed, tighten down just enough to turn the push rods with your fingers with slight tension.
This is out of a Technical Specifications Manual.

Jul 30, 2009 | 2002 Pontiac Grand Am

2 Answers

2004 pontiac grand am 3.4 rocker arm torque?


the rocker arm torque specs for the la1 gm 3400 sfi v6 is 168in lbs or 14ft lbs and 30degrees past that hope that helps you it came straight from my local dealer!

Apr 05, 2009 | 2004 Pontiac Grand Am

2 Answers

Need torque specs


I presume that you are connecting your Intake manifold to the cylinder head after replacing your intake gasket, if so they are 30ft lbs, and 360 in pounds. Hope that helps

Jan 31, 2009 | 2003 Chevrolet Venture Passanger

1 Answer

Rocker torque


89 inch pounds and turn 30degrees

Dec 27, 2008 | 2002 Pontiac Aztek

4 Answers

Engine Bolt Torques- 2005 Chevy Impala/3400 Engine


Head Bolts
Step one 37 ft lbs then tignten 120 degrees more

Rocker arms
Step one 11 ft lbs then tighten 90 degresss more

Upper intake
89 inch lbs
Lower intake
132 inch lbs

Jun 28, 2008 | 2005 Chevrolet Impala

Not finding what you are looking for?
2002 Pontiac Aztek Logo

448 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

63584 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...