Question about 1983 Ford Mustang Hatchback

1 Answer

1983 v6 is no fun

I have 1 1983 convertible mustang with a v6 automatic. I know it is probably a lot of work but I was wondering if anyone has ever successfully implanted a 1999 mustang v6 with its manual transmission into an earlier fox body. I haven't seen it done and although I know simply buying a v8 convertible would be easier I think transplanting the v6 would be interesting.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 21,990 Answers

Give me a welder and a set of gas bottles and i will fit anything into whatever you like.but to be honest i do think your biggest problem will be the wiring.want to really hot it up put a jag engine in.but its most likely worth more in its original condition.high compression engine and not subject to having to fit a cat.but you could still fit the manual gearbox though.OK for when your europeon cousins visit as most of us lot in europe especially spain and italy wouldnt know how to drive an auto,they are only for old and disabled people.plus they cost a lot of money extra to have when you buy a vehicle and thats only if you can get it in an auto,very few manufacturers build europeon cars in autos

Posted on Dec 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the torque for the main and rod bearings on a 2005 dodge stratus 2.7L automatic v6?


Main bearing cap bolts there is a outer cap bolt that are torqued to 20 ft lbs + 1/4 turn. Then there a inner cap bolt that are torqued to 15 ft lbs + 1/4 turn. Con rod bolts are torqued 20 ft lbs +1/4 turn

Jul 06, 2014 | 2006 Dodge Stratus

1 Answer

Msd 5200 install on 1983 ford mustang 3.8l


go to www.automecanico + www.autoelectronico.com for instruction translate to english. Is good information for fix it.

God bless you

Jul 25, 2012 | Cars & Trucks

1 Answer

2001 mustang fuse box diagram


I have a 2001 convertible mustang and my dash light were my gas gauge is and my speedometer are that light is out and I was wondering how I go about replacing it? Is it a fuse or a bulb? And I need to replace the fuse for the convertible top.... So if anyone knows which fuses these are I would greatly appreciate your help.. Thank You.

Oct 17, 2011 | 2001 Ford Mustang

2 Answers

LOCATION OF THE FUEL PUMP ON A 1983 MUSTANG V6


as far as i know the fuel pump is located in the actual fuel tank. It'll probably be spring loaded so that it will keep itself in place as the tank flexes. They usually have some kind of a "bobber" on them that tells the PCM and/or a guage how much fuel you have.

hope this helps,
Thomas

Feb 28, 2010 | 1983 Ford Mustang Hatchback

1 Answer

2000 ford mustang 4.6 is coming up with code of bank 2 sensor 1 an changed plugs an 5 an 6 cyl plugs were black but no plugs were wey


ur engine is a v6, the head that has the number 1 cylinder is bank 1, so u need to go to the second head and follow the exhaust line, ull find a sensor there, probabbly has 4 cables looks a lot like a spark plug, thats ur oxygen sensor, that probabbly needs to be replaced.
hope this helps
have fun!

Oct 31, 2009 | 2000 Ford Mustang

1 Answer

How do I remove the "T" handle shifter?


it just pulls off, but they can be stubborn, have hit my head on roof more than once in the 25 years i worked for a Ford dealer..

Sep 16, 2009 | 1983 Ford Mustang Hatchback

1 Answer

Ford mustang 3.8 v6 Auto


Possible, but probably expensive.May be able to find used parts and save some$

Oct 12, 2008 | 2003 Ford Mustang

1 Answer

Oil pressure sending unit 83 caprice


i believe it is back by the distributor at rear of engine

Oct 01, 2008 | 1983 Chevrolet Caprice

1 Answer

1983 Mustang C-4 transmission


that trnas will not bolt up and since you don't have a computor control the trans wount interface with the harness it requires which you do not have on your vehicle. please rate this solution

Aug 30, 2008 | 1983 Ford Mustang Hatchback

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...