Question about 2000 Chevrolet Blazer

1 Answer



Posted by on

  • 1 more comment 
  • nicollebrode Dec 27, 2008

    thanks for you help i tried all that still not working

  • nicollebrode Dec 27, 2008

    No thats it. You are great thanks for your help!

  • riffminer200 Mar 09, 2009

    1999 gmc suburban k1500. I have a broken wire in brake swicth and need a diagram to trouble shoot it



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.


    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 124 Answers

Have you checked your brake light fuse? If it is good do your rear turn signals work? If you have turn signal and no brake lights it is probably the turn signal switch these are a common problem and your power for your brake lights goes through your turn signal switch. Sometimes it is actually the hazard switch that melts but this can not be serviced alone. If you have no rear turn signals and no break lights it could still be the turn signal switch but is more likely to be a wiring problem in the rear usually trailer wiring T connections. Chiltons has wiring diagrams in there manuals but they are not always accurate. Let me know if I can help you further and please rate.

Posted on Dec 27, 2008

  • mikehumble Dec 27, 2008

    You have replaced the turn signal switch on the column already?

  • mikehumble Dec 27, 2008

    Why did I get a thanks for trying?



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

On my 2004 expedition one of the break lights is not working. the parking light work fine, but when I press the break the passenger side break light does not come on. I changed the bulb and that did not...

check the electrical contacts within the bulb fixture for oxidation or damage. Check also the wires and wire harness for damage or connection problems.

Oct 26, 2010 | 2004 Ford Expedition

1 Answer

Where do the head lights, break lights and dash lights ground. all swithces and fuses are good but none of the lights function besides the signals

well there are a number of different places that are considerd grounds you just have to find the right on check the brake light switch look for it on the back of the brake pedel its a little box with a switch when depressed turns on the brake lights easy to replace also you could have a direct short but you would probaly be blowing fuses good luck

Aug 23, 2009 | 1993 Dodge Dakota

1 Answer

Tcs light come on along with abs an hand break light

You most likely knocked the electric plug loose when you changed the brakes, go back and make sure they are tight.

Jul 24, 2009 | 1999 Mazda 626

1 Answer

1995 Dodge Spirit 4dr sedan back up lights.

You do know your backup lights work in conjunction with safety neutral switch/backup switch on transmission right?

Jul 16, 2009 | 1995 Dodge Spirit

1 Answer

My rare break lights won't switch off when I turn the car off. The garage already charged me over a $100 to reset the electrical system which worked fine, but now (1 month later) it's doing it again. I...

The brake light switch is inexpensive and easy to change. It might not even need replacing, just adjusting. Don'y disconnect your battery.The brake switch is ounder the dash where the brake arm can actuate it,

Jun 23, 2009 | 1996 Ford Contour

1 Answer

Break lights not working

try changing one of the buls and see if that one then works

Feb 10, 2009 | Hyundai Motor 2002 Elantra

1 Answer

I have a hyundai accent 2001 and the break lights are on all the time what could be the problem?

you have either a broken brake light swithc, or your brake peddal won't come all the way back.

Jan 10, 2009 | Hyundai Accent Cars & Trucks

4 Answers

When i put my brights on my headlights go out

Replace your headlights. Your brights are no longer working. There are 2 sets of lights in each headlight. One set for your dims and one set for your brights. It is time to replace the lights.

Dec 05, 2008 | 1998 Pontiac Grand Am

1 Answer

Change brake light bulb

If you need to replace your tail light bulb, first remove the cover(its round) from the inside of your trunk, there will be a black knob that needs to be unscrewewed totally to release the back light casing. Next, along the rear fenders where the lights are, there are two gaps. The insde gap( nearest hatch back door) is a release tab/clip on the light inside between the gaps. Insert a butter knife or something slim and pull out casing(don't be afraid, and it takes a little force to pull out). After you pull out casing,you'll find to light swithces(one is for the turn signals and other is your break lights). Turn the light switch counter clockwise(assuming it's hanging upside down)and remove. Switch out light bulb with new one(autozone has them for about $4.00 - package of 2)replace every thing back as you uninstalled it. Its recommended to replace all bulbs, that way it you don't have to do it again later when they go out. It'll save you lots of time and money. Hope this will help anyone so print and save in your manual for later use.

Sep 03, 2008 | 2004 Volkswagen New Beetle Convertible

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

393 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

82149 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22382 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides