Question about 1999 Lexus RX 300

1 Answer

How do I remove Head Light assembly

I have a 1999 Lexus RX 300 and need to remove Headlights

Posted by on

  • 2 more comments 
  • Anonymous Mar 18, 2014

    torque specs and procedure cylinder head

  • Anonymous Mar 23, 2014

    driving lights not working

  • Anonymous Mar 24, 2014

    remove head light

  • Anonymous Mar 25, 2014

    i need to remove passenger front seat

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Just found this site with your answer.
http://www.toyotanation.com/forum/showthread.php?t=269762

Posted on Jan 19, 2009

1 Suggested Answer

  • 1 Answer

SOURCE: How do I remove Head Light assembly on my 1999 Lexus RX 300

After removing the top and side bolts (which are obvious) Go to the fender liner. Remove all but the top screw . You will find (by flashlight or shop light) two bolts coming out of the headlight rear. With a socket wrench and 10mm socket, remove the two nuts on the headlight and pull out the headlight from the front after insuring the bulbs are removed and identified for reinstall. Take your time. It is not difficult.

Posted on Apr 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1999 lexus rx 300 awd and srs light stays on


John, needs to be scanned to determine fault.

Feb 21, 2016 | 1999 Lexus RX 300

1 Answer

Headlight on rx 300 lexus won't work even after changeing the bulb


have a tester handy.unplug the light and then turn on the headlights.with tester on 12 volts test plug to see if you have 12 volts. if not the plug is properly corroded or shorted .

Nov 24, 2011 | 1999 Lexus RX 300

1 Answer

Can't find the head light adjustment screw on my


you need to take the cover off and they should be phillips ( 2 ) on the headlight mount

Nov 24, 2009 | 2001 Lexus RX 300

1 Answer

Having a challenge programming a 1999 Lexus RX 300 newly cut key.


did the lock smith cut key with resister in in maybee not gotta go to dealer get one cut then put old key in start car then turn of remove key put new key in turn on till security light goes out then start car

Aug 29, 2009 | 1999 Lexus RX 300

1 Answer

Burned out light bulb (# 9) in the manual, how do I change it on my 200 lexus rx 300?


Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-fareast-font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Lift the hatch. The tall center light is located behind the upper hatch inside panel. There are two panels need to remove. One panel is on the right, the other on the left. To remove the panels you have to use flat screw driver to pry out the panel in several locations. (These panels are secured by several small metal clips.) Be careful to collect all these clips and replace them on the back of the panel. You will need these clips to replace the panel later on. After remove the panels, you will be able to locate the screws on the tall center stop light assembly. Remove those screws and cover. After replacing light bulb. Assemble everything in reverse order. Remember, the metal clips have to set on the back of the two panels not the car body.

Apr 16, 2009 | 2000 Lexus RX 300

1 Answer

How do I remove Head Light assembly on my 1999 Lexus RX 300


After removing the top and side bolts (which are obvious) Go to the fender liner. Remove all but the top screw . You will find (by flashlight or shop light) two bolts coming out of the headlight rear. With a socket wrench and 10mm socket, remove the two nuts on the headlight and pull out the headlight from the front after insuring the bulbs are removed and identified for reinstall. Take your time. It is not difficult.

Dec 27, 2008 | 1999 Lexus RX 300

1 Answer

A Rear bulb is out on my 99 lexus rx 300.


take out screwws on light remove bad lightbulb then replace lightbulb

Dec 03, 2008 | 1999 Lexus RX 300

2 Answers

How to replace tail light


First you need to lift the hatch. There are two screws under plastic caps. Remove the caps and you will be able to unscrew these screws. Carefully using a flat screw driver to pry out the tail light assembly. It have to plastic pin that attached to the car body. do not break the pin. After you pry out the tail light assembly, you will be able to replace the light bulb. Replace everything in a reverse order.

Nov 17, 2008 | 1999 Lexus RX 300

1 Answer

Lexus RX 300 suv


i understand why you want to do it yourself - it's expensive to have it done by a mechanic. that's because it's a major job to remove the engine, takes 4-5 hrs. i avoided having it done by having an honest mechanic i've been going to for a long time do something else (sorry, i don't know what) that fixed the problem temporarily. he told me it must be done after 90k miles or so, so i'm saving up.

Jun 29, 2008 | 1999 Lexus RX 300

Not finding what you are looking for?
1999 Lexus RX 300 Logo

Related Topics:

1,088 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...