Question about 1995 Chevrolet Blazer

1 Answer

95 chevy blazer has dash lights intensity varying while driving

95 chevy blazer 3.6l 4wd (S-10 version) has the dash lights intensity varying while driving (high to low). Not noticeable when stopped. Any idea? Bad voltage regulator?

Posted by on

  • Anonymous Mar 20, 2014

    i lock 4x4wd in and now the light will not go out what can i do

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 56 Answers

This is not a voltage problem. The problem is in the headlight/dash dimmer. You have to turn the dimmer switch on the headlight switch to select what intensity you have right? try turning it down just a smidge and if it stays steady then it is most likely a dimmer switch problem. This requires replacement of the headlight/dimmer switch to fix. local auto parts shop should be able to have this in stock.
ps dont forget to rate my solution please. Thanks

Posted on Dec 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 2000 Chevy Blazer I think its stuck in 4 wheel drive the buttons on the dash do not work or light up and it makes a weird and loud noise when you're driving down the road


On the kick board on the passengers side take the kick board off and there is a metal box with two nuts , take the nuts off unplug the box get a can of electronic cleaner spray at any auto shop. Spray the contacts on the box and spray the plug, let dry a few minutes and plug it in before you bolt it up start the Blazer and push the 2wd button it should light up. In my 2000 blazer I have to shut the motor off turn the key forward until the dash lights turn on
to get it out of 4wd . If that doesn't work go to www.youtube.com/watch and type in your problem click go and there is videos you can watch, that is what I do when something goes wrong with my Blazer, Also there is a Transfer Case Vacuum Switch that is probably bad it is hard to get to it is on top of the transmission it has three vacuum hoses one vacuum nose for 2wd 4wd and4wd low range. just a couple things you can check that usually fix this type of problem, I think the whining you hear is being in transfer case the book says this vehicle is not intender to operate at high speeds in 4wd.

Apr 13, 2015 | 2000 Chevrolet Blazer

1 Answer

My 95 chevy blazer 4WD hazards lights dont worj


check the brake switch and the brake pendal

Sep 20, 2014 | 1995 Chevrolet Blazer

1 Answer

Stuck in 4 wheel lo, how do i get it back to 2 wheel hi ?


On these issue, there are few solved help links for troubleshooting the issue easily.-------

Click the link below: ---

No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html

-----------

4X4 Truck makes roaring noise in the front end?

http://schematicsdiagram.blogspot.com/2012/01/4x4-truck-makes-roaring-noise-in-front.html

-------------

Car will not go into 4WD high or 4WD low?


http://schematicsdiagram.blogspot.com/2011/12/car-will-not-go-into-4wd-high-or-4wd.html

--------------

No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html

------------

4 wheel drive system will not disengage?

http://technoanswers.blogspot.com/2012/01/4-wheel-drive-system-will-not-disengage.html

----------

4WD light is flashing and beeping? NO 4WD high?

http://schematicsdiagram.blogspot.in/2012/02/4wd-light-is-flashing-and-beeping-no.html

----------

2002 Jeep Wrangler: 4WD Idiot Light is ON?

http://technoanswers.blogspot.in/2012/06/2002-jeep-wrangler-4wd-idiot-light-is.html

----------

Traction control switch will not engage on 4WD High or Low

http://whoisbyme.blogspot.com/2012/10/traction-control-switch-will-not-engage.html

-----------

4WD light flashing and 4WD will engage after few minutes

http://repairhelpcenter.blogspot.com/2012/10/4wd-light-flashing-and-4wd-will-engage.html

------------

2008 Toyota Tundra: 4x4 Wheel Drive Light is Flashing?

http://technoanswers.blogspot.in/2012/05/2008-toyota-tundra-4x4-wheel-drive.html

----------

4x4 front differential will not engage the axle on ford?

http://technoanswers.blogspot.in/2012/02/4x4-front-differential-will-not-engage.html

-------

4x4 will not engage on Ford F150?

http://technoanswers.blogspot.in/2012/02/4x4-will-not-engage-on-ford-f150.html

-------------

Dodge Ram 4x4 light keeps flashing

4X4 LOW LIGHT IS FLASHING ON DASH

http://technoanswers.blogspot.in/2012/09/dodge-ram-4x4-light-keeps-flashing.html

----------

Ford 4x4 front wheels will not engage?

http://technoanswers.blogspot.in/2012/02/ford-4x4-front-wheels-will-not-engage.html

-------------

These details will help.

Thanks.

Dec 09, 2012 | 1999 Chevrolet Blazer

2 Answers

I have a 1996 chevy blazer and dont know how to disengage from four wheel drive to two wheel drive?


As I recall the 96 blazer had electronic shifting for 2wd to 4wd. There should be a small panel on the drivers dash buttons for 2wd, 4wd lo and 4wd hi.

Simply press the desired button while stationary and if the system is functioning properly then it will shift and the light for the engaged type of drive will be lighted. Generally you would like to be in 2wd for this vehicle.

Mar 10, 2010 | 1996 Chevrolet Blazer

2 Answers

2001 Chevy 4wd won't go into 4wd.


there is a module on transfer case above front drive shaft this module is bad but there are two styles so you will need the part number off of yours

Jul 27, 2009 | 2001 Chevrolet Blazer

1 Answer

1999 chevy blazer 4wd not working. in 2wh hi.service 4wd light is on, on the dash. no lights on any of the dash buttons. any suggestions.


switch, 4x4 motor, 4x4 module can cause the lamp to come on need the code most parts stores will tell you code with out charging a dime

Apr 27, 2009 | 1999 Chevrolet Blazer

1 Answer

97 Blazer starts hard and quits while driving


Replace the Ignition Switch, the electric part, not the lock cylinder.

Mar 02, 2009 | 1997 Chevrolet Blazer

1 Answer

Replace the bulb in a 95 Blazer 4WD switch on the dash


the square box that all 3 lights are held in by can be taken out, just pry it on the top or bottom with a flat head screw driver, once you get it out you should see the wires that connect to the buttons,there are four tabs, 2 on each side, that you can just push in and the back panel should come off, it will look like a circuit board. twist the light bulb left or right and you should see how it comes out, just replace the bulb, and put back in and twist. should only have to twist 1/4 of a turn. snap everything back in place and it should be working. hope this helps.

Dec 29, 2008 | 1999 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

293 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...