Question about 2001 Volvo S60
Need help to connect the harness cables to the ignition coils to my volvo s60 t5 turbo 2.3l, just finished replacing my engine having trobble which spark plug wire goes where, there are thee wires per each cylinder spark plug wire and each has a wire that's different need to know how to identify which wire goes to which cylinder, help, thanks Bernard
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: how to remove front door
Pop the grab handle cover off, two different styles.
1. With a slot under the grab handle, take a small screw driver off and gently push up, it should just pop out.
2. Simple cover that can be separated with a bone tool or similar so you don't chip the cover piece.
Behind that you will find two Torx 25 screws, Take those out.
Around the edge of the panel should be around 8 plastic rivet type of thing.
Again...two different styles.
1. With center pins that blend in perfectly with the rivet. Should be about 3/32nds diameter. Push the center in and the rivet deals should pop out. Be sure not to lose the center piece...easy to lose.
2. Same deal but with a larger center pin.
Take the plastic triangle piece near the upper right hand area as facing the panel.
Pull bottom away from door and up to release from top section of door.
Careful removing the cable for the door lock release, and remove the connectors from the tweeter and driver's door module.
Posted on Aug 14, 2008
SOURCE: engine codes P0101 and P0170
P0101 Mass or Volume Air Flow Circuit Range/Performance Problem
Air flow sensor problem, maybe causing the second code to go off.
The air flow sensor should be right near your air filter box.
P0170 Fuel Trim Malfunction (Bank 1) Oxygen Sensor
Posted on Mar 27, 2009
the throttle housing is in front of radiator ,throttle housing is held by 4 6mm bolts which are screwed up,it should come apparent how to identify screws when large jubilee on entry pipe is removed ,some people take radiator out for ease of access but it is possible to remove trottle body without rad removal,spark plugs are under plastic head cover ,coils for each plug should be carefully removed
Posted on Jun 21, 2009
Tips for a great answer:
Feb 10, 2015 | 2004 Volvo S60 T5
Sep 10, 2011 | 2002 Volvo S60
Feb 09, 2010 | 2001 Volvo S60
Dec 23, 2009 | Volvo S60 Cars & Trucks
Aug 17, 2009 | Volvo C70 Cars & Trucks
Mar 31, 2009 | 2001 Volvo S60
Feb 04, 2009 | 2001 Volvo S60
55 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: