Question about 1998 Chevrolet Blazer

1 Answer

1998 chevy blazer

The ticking from the turn signal wont stop unless i brake. The light itself works and is not flashing but the ticking just wont stop unless i touch the brake. Any thoughs as to what it is and how to fix it?

thanks

Posted by on

  • Anonymous Dec 29, 2008

    I have had the same problem with my turn signal switch also. I found out if you replace the switch assembly that it corrects the problem. The turn signal switch and Hazzard is all one piece. The whole assembly is kinda expensive so do some looking around and you might come across a deal on one. Hope this helps

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 124 Answers

Unplug the turnsignal switch. If it stops then replace the switch. This is a common problem. Alot of times it is the hazard button that melts and causes it because all the turn signal functions go though the hazard switch but you have to replace the whole switch to fix it. Let me know what you find or if I can help you further. Please rate.

Posted on Dec 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1998 GMC Jimmy, put a different engine from a 1996 gmc jimmy in it, its been running great and here about 2 weeks ago it started giving me problems, I put the key into the ignition turn it to...


the signal flashing is a bad hazard switch. they all brake. if you hold the flasher buton just the right way the noise stops. sounds like your dash is shorted with the flasher

Mar 13, 2013 | 1998 GMC Blazer

1 Answer

1998 Jeep Cherokee Sport 4.0L When I'm stopped at


My guess would be a problem with the turn signal switch.
Unless there is a short in one of the bulb sockets and the parking lights are flashing too.

Jul 09, 2012 | 1996 Jeep Grand Cherokee

2 Answers

Hi: I have a 1998 Chevy Blazer 4.3 The brake lights and turn signals don't work.... HELP


Sounds like you have a bad multiple function turn signal switch. A couple things to try With your foot pressing on the brake pedal, Press the four way flasher button up and down, press and hold it down, pull up on it, or wiggle it. If the brake lights come on during any one of those replace the switch. With the key in the run position pull, push, the turn signal lever slightly. If the turn signal or brake lights start to work replace the switch. Let me know if none of those work, they usually do, and I'll get you some more in depth diagnostic info.

Jun 17, 2011 | 1998 Chevrolet Blazer

1 Answer

I am having trouble with the abs braking system on a 1998 chevy blazer. The yellow brake light is usually off for the first few minutes of driving and then comes on and stays on until the car is turned...


the yellow light is warning you that a problem exsists with the abs. unless you are experienced with brakes and abs would highly suggest you take it to a shop.

Mar 29, 2010 | 1998 Chevrolet Blazer

1 Answer

Lower brake lights dont work,third light does


Turn signal switch 95% of t he time. Try to work your hazards, if it stuck at all will also cause this.

Feb 10, 2009 | 1998 Chevrolet Blazer

2 Answers

1998 chevy lumina brake lights intermittent.


This is a classic example of turn signal switch failure. On GM vehicles with a multi-function turn signal switch and combination stop/turn/tail lights (all rear lights are behind red colored lenses except for back-up lights) The brake light power is routed through the turn signal switch. This makes it possible for the right rear light to function as a stop light while the left rear turn signal flashes, and vice-versa. When the contacts fail to remain constant the brake lights, and turn signals can become intermittent. The proof that the brake light switch is functioning correctly is that the high center (cyclops) brake light functions properly. Wiring integrity is verified if you can prove that turn signals operate, but that can still be intermittent with this complaint, BUT if you use your hazard switch to turn on all the signals at once, you can verify wiring integrity. This is because the turn signal, and the brake light use the same circuit, and bulb filament in the rear lighting assembly. If any Hazard lights fail to function, check bulbs first, then retest. If all Hazrd light flash correctly and reliably, bulbs, sockets, and wiring have proven integrity, and the turn signal switch is the remaining component in the system which needs to be tested. Unfortunately, this switch requires disassembly of the steering column for service, testing or replacement. If you have never disassembled, and successfully reassembled a GM tilt steering column, I would reccommend professional assistance.

Oct 31, 2008 | 1998 Chevrolet Lumina

Not finding what you are looking for?
Cars & Trucks Logo

231 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...