Question about Fiat 124

1 Answer

Overheating, blow out through exspansion container

My Fiat cinquecento is overheating, and the cooling fluid is blown out through the overheating valve in the exspansion drum. Next to this when setting the car heater to full warmth, it still is blowing cold air. Does this mean that the thermostath is broken or is it the waterpump??

Thank you in advance for your answer and help.

Best regards,
Paul Zieltjens

Posted by on

  • Anonymous Feb 19, 2009

    Hi Where is the stat on the car, thanks

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 75 Answers

Note that thermostat and water pumps eare both part of the cooling system you neded to ck them for proper fonctioning .,ck the radiator fans electric motors for blowing propely ,ck radiator for clogs in the lines ,hoses for leaks ect.......

Posted on Dec 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want to know if there is a fiat club that one can join


Pieter, I will post links to a bunch of forums and they can tell you about the clubs. "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Fiat 500 Forum US Fiat 500 Cinquecento Forums
The FIAT Forum For Talk On All Things FIAT
Fiat 500 Forum USA Canada Fiattech com Category Index
FiatScene US and Canada Fiat 500 Cinquecento Forums
Fiat Club America

Apr 27, 2016 | Fiat Cars & Trucks

1 Answer

Were do the ht leads go on fiat 1 2mpi


Technical: HT Leads diagram? - The FIAT Forum

www.fiatforum.com > FIAT Cars > Cinquecento / Seicento
Aug 30, 2008 - 9 posts - ‎3 authors Anyone got a simple diagram of where each lead goes from each plug to which ... Makesure the HT leads are on correct, then try them either way. ... As long as 1+4 spark plugs go to one coil pack, then 2+3 go to the other coil ... Fuel light flashing but won't start (No spark)
15 posts
Nov 2, 2013
Fiat Punto 2001 8 valve 1.2 firing order
3 posts
Feb 8, 2009
More results from www.fiatforum.com

ignition - Methods of diagnosing a non-starting Fiat Uno ...


Dec 01, 2015 | Fiat Cars & Trucks

2 Answers

On my 2003 dodge stratus se sedan 4 cyl dohc.. Car started overheating and also blows cool air when heater is on. I just changed thermostat and refilled antifreeze and iwhen tested was blowing hot air...


Did you check to see if you have water or anti freeze in the oil? You could have a blown head gasket. This would be why you are adding fluid so quickly. let me know.

Mar 08, 2015 | 2003 Dodge Stratus

1 Answer

Fiat stilo abarth 2.4 semi-automatic gearbox what type of clutch fluid is used


The clutch in the Fiat stilo abarth selespeed uses the same fluid as the braking system. Just find the container in the engine bay with the braking fluid. And top up with ''DOT 4 Brake & Clutch Fluid'' Note it's not the oild for the Gearbox or selespeed. You should never touch the container that holds the fluid for the Selespeed.

Jan 28, 2013 | Cars & Trucks

1 Answer

Fuse box layout for 1996 Fiat Cinquecento?


usually on the under side of the fuse box cover there is sticker with the layout of the different fuses. Look in the owners manual that's in the glove box, that should show the layout.

Nov 10, 2009 | 2006 Fiat 124

2 Answers

I need a diagram of my fiat Cinquecento's engine - overheating probs with the radiator. I have replaced the rad cap, no difference. I'm putting water in every time I use it. It's a 'N Reg'. Been told it...


hi ok i can help with this problem u need antifreez cause water evporates faster, then and u need to check if the senser is bad or rust with water here have this digramsm-v1-10-19.jpgeck thermal senser that

Aug 06, 2009 | Fiat 124 Cars & Trucks

1 Answer

Starter motor


Take it to a shop or get yourself a repair manual to find out the proper steps to raise or remove the engine to make space for the starter to be removed. You need 4 jack stands and a floor jack and large wooden blocks. You should have a friend to assist you with the floor jack. also, for safety in case the car should fall.

May 27, 2009 | 2006 Fiat 124

1 Answer

Engine overheating and blowing fluid out of vents


fluid coming out of the vents indicates a faulty heater core, but this does not explain the overheating problem. The blown heater core may only be the result. Check the coolant level.Check for coolant leaks primarily at the water pump. Check the thermostat by insuring both hoses to and from the radiator warm up. Check for foamy oil or white smoke from the exhaust indicating a blown head gasket or cracked head. Check to ensure your cooling fan is working.

Jan 03, 2009 | 2003 Nissan Altima

1 Answer

Fiat cinquecento p reg cuts out


the diaphram on your carbureta is naff'd

May 27, 2008 | 2006 Fiat 124

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

521 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fiat Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Randy Ohler

Level 3 Expert

14121 Answers

Are you a Fiat Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...