Hi,, i just change new wiper motor and still dont work?? please help me ,if you can,,,
2005 Taurus wiper washer motor won't work. I tested the pump-OK, Multifunction switch -OK; told it might be the "Smart Junction Module: ? How do I test SJM ?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
don t check fue,it is in the book,the fuse list, but better check on wipermotor, 3 wires,2 big one fine,check if pos and neg arive WITH THE HOOD CLOSED if pos and neg found,change wiper motor,it is disease,
the intermitent works off of the (gem) generic electronic module which controls the wipers. if wipers working except the delay cycle replace the module. the relays are located in the engine compartment . wiper park relay- wiper hi-lo relay- washer motor relay. fuse in fuse panel under driver side dash panel.
This may be multi-function switch failure. The multi-function is the turn signal/wiper/headlight switch. It may need to be replaced. Is this the type of switch you have. Hope this helps. If it is not the switch then the pump may be bad or have a bad wire connection.