Question about 1991 Suzuki Swift

1 Answer

Engine not ruinning right

Hi I have a 1991 1.3 suzuki swift and a friend changed the ignition leads and teh car doesn't run right now - do you have the firing order so I can see if they are on right

Posted by on

  • Ashok panchal Dec 01, 2011

    car is not starting needed markeble timming

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 740 Answers

1 3 4 2... good luck

Posted on Dec 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P0340 and Tach doesn't work


this is easy, 340 is fully cover here
http://www.alldata.com/
Camshaft Position (CMP) Sensor Circuit
the sensor is bad/dead or intermittent.
the modern engines, (some) can run a while with one or both RPM
sensors bad.(not both same time)
there are 2, the CMP and the CKP.
crank, and cam in english.
on some cars, the ECU goes to limphome when one dies.
btw , both need to work for OBD2 MISFIRE to work.
use alldata, look up the code for your year, then look up
Diagnosing, CMP ,

some cmp on suzuki are very smart, they have dual sensors inside.
this allows limp home to work better.
the cmp is at the rear of the cam on most suzuki.

Apr 29, 2013 | 2006 Suzuki Swift

2 Answers

Will the drivers side door from a 1990 suzuki swift fit and work on a 1991 suzuki swift


Go to the salvage yard and have them use the parts cross reference book to confirm this will work. I would say yes, but confirm that.

Sep 27, 2012 | 1991 Suzuki Swift

1 Answer

Missing hose from 1991 suzuki swift,what is it!


This is the warm air intake hose - it was probably a corrugated aluminium pipe about 2" in diameter. It's commonly called the stove pipe. Warm air from around the exhaust manifold is piped to the air filter case and used when the engine is cold to enable the fuel in the carby to atomise better. As the engine warms up, less of this pre-warmed air is needed and the valve in the air cleaner tube gradually closes off. Air then only comes from behind the headlight or the resonator box in the wheel arch. The loss of this hose won't affect warmed-up drivability at all (unless you are in a really cold climate), but performance/economy when cold or during warm-up maybe worse.

Jan 01, 2010 | 1991 Suzuki Swift

1 Answer

Suzuki swift 1998, 1.4 16v automatic drives


get the radiator checked and get the air filter cleaned and get the check teh coolant level. i ahd same issue in my swift. and it got fixed. just follow these.. it will fix the problem. no big issue.

Sep 25, 2009 | 1998 Suzuki Swift

1 Answer

Suzuki swift 1000 carburetta. engine will not start when you crank the engine with the key but if you bump start it. it will start and run fine any ideas


Could be the starter motor cranking too slowly or a fault in the wiring not allowing power to the ignition when starter is engaged.

May 04, 2009 | 2006 Suzuki Swift

1 Answer

Suzuki swift 1.3 single OHC runs fine when cold,


Check the valve timing.You might have some problems with your timing belt or camshaft sprocket. If timing is OK, check the resistance of your TP sensor, specially on the terminals for full throttle. Resistance should be 2 to 6.5 kilo ohms. Lower than this the ECM will not give the right avance ignition timing to your engine. Repositioning the mounting angle may correct the problem.

Apr 23, 2009 | 1993 Suzuki Swift

1 Answer

1998 suzuki swift it has 39000 km runs good it gets 450 km to the tank


1991 Swift - 203,000km. It runs excellently and gets 480km to the tank on standard, 550km on Premium (95 RON). Original clutch too, but has just had 2 new front shocks.

Mar 25, 2009 | 1998 Suzuki Swift

1 Answer

Suzuki swift running problems


Spark plugs. Or ignition coil.

Aug 24, 2008 | 2001 Suzuki Swift

Not finding what you are looking for?
1991 Suzuki Swift Logo

Related Topics:

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...