Question about 1999 Ford Crown Victoria

2 Answers

1999 Crown Victoria - police interceptor

Interior lights don't come on when doors are opened.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 46 Answers

You might have to replace the door switches (they're cheapish, and not too difficult). Any standard parts store will have them.

Posted on Jan 16, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 740 Answers

Make sure tthat the light switch is switched to door (usually in the middle)or make sure light comes on when you switch it on. If nott check for powerand ground at the bulb ifs good replace bulb and that should fix ya. However if non of this works make door switches are not hanging up/stuck in in postion. contact if you need more help. Good Luck

Posted on Dec 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install a rear door enable kit on a 2011 Police Interceptor Crown Victoria so that the rear doors can open from the inside?


there should be the rods and clips inside the door if not you must go to the junk yard for the rods and the you must take off the door panel unscrew the lock mechanism at back of the door and fit the rods into the lock and the door handle then reassemble it ?????? did you check to make sure the child safety locks are not on ??? also your car may have the dark out system activated and you have to go to the dealer for that so they can reprogram the lighting control module to get the interior lights working

Nov 10, 2016 | 2011 Ford Crown Victoria

1 Answer

Why does my 2007 Crown Victoria Police Interceptor vibrate when I get to 40 miles an hour and then die off back to normal by the time it reaches 50


Ford Crown Victoria Questions - what would cause a whole ...

www.cargurus.com > Questions > Ford > Crown Victoria
CarGuruswhat would cause a whole car vibration when going between 48 and 65 mph, even ... Asked by Dfranz Aug 29, 2013 at 11:53 AM about the 2001 Ford Crown Victoria Police Interceptor ... You have an open diff by turning one wheel the driveshaft should turn before the .... 2007 Ford Crown Victoria Police Interceptor For Sale.

Nov 03, 2015 | Cars & Trucks

1 Answer

Looking for rearend for ford crown victoria police interceptor


I have one. LBrown1806@juno.com. Selling my 1999 crown vic PI on Unocardealers.com zip code 55057. Please check it out.

Jul 16, 2010 | 1999 Ford Crown Victoria

3 Answers

Do the back windows roll down on crown victoria police interceptors


I do believe so. But they are a lockout switch on the drivers switch

Mar 27, 2010 | 1999 Ford Crown Victoria

1 Answer

2003 Crown Victoria Police Interceptor has rear door locks not accessible for unlocking by passenger. What is the least expensive way to fix this?


Assuming you have played with the child locks on the doors you may fnid that your particular car is missing the linkage from the interior door handle to the door lock. Apart from making up a rig yourself I would suggest going to a breakers yard or possibly your local Ford dealer

Aug 13, 2008 | 2003 Ford Crown Victoria

1 Answer

2006 crown victoria - no heat


I would change the thermostat in the vehicle first and go from there. Hope this helps......Dan

Jun 20, 2008 | 1999 Ford Crown Victoria

Not finding what you are looking for?
1999 Ford Crown Victoria Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

66126 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5363 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...