Question about 1999 Chevrolet Silverado 1500

1 Answer

How to remove the transmission

1997 chevrolette 1500 .2 wheel drive

Posted by on

  • 1 more comment 
  • Anonymous Jan 04, 2009

    I have gotten all of the bolts out of the trans and the dowels seem to not be letting one corner out.

  • Anonymous Mar 17, 2009

    remove transmission

  • John Weathers
    John Weathers May 11, 2010

    Is it a 5 speed or automatic??

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,114 Answers

If you do not know how this is a large job delicate between motor and transmission maybe you might reconsider and find on the ground beside you assistance?

Posted on Dec 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a diagram of the fronr axle


About 1,160,000 results (0.60 seconds) Search Results

    Dodge Ram 1500 Questions - 4WD not engaging all the ...

    www.cargurus.com > Questions > Dodge > Ram 1500

    CarGurusAsked by mudslingin Oct 18, 2013 at 01:00 PM about the 2001 Dodge Ram 1500 ... to get it into 4LOW is to 1st get it into HI and then stop and shift it into LOW. What's ... I have a 98 Dodge Ram 1500 that I can not get the 4 wheel drive to engage. ... what web site can i go to so i can see how the inside looks on timing gears.

    NEED HELP! DODGE WONT GO INTO 4x4 SNOWS FALLING [Archive ...

    www.plowsite.com > ... > Commercial Snow Removal

    Jan 22, 2005 - 23 posts - ‎14 authors
    My 1997 dodge ram 2500 wont go into 4x4. I shift the transfer ... Because on mydodge the light doesnt come on in 4 wheel drive sometimes.

    Diagnosing 4WD Engagement Problems on Dodge Ram ...

    dodgeram.org/tech/repair/4X4/4x4_engagment.htm
    Nov 1, 2000 - This shift will be easier if you momentarily release the accelerator pedal. Apply a ... Do not attempt to shift to or from 4L while transmission is in gear or clutch is engaged. ... OK, now when you shift into 4WD it gets a little more complicated. .... I have a 97 RAM 1500 Club Cab Sport 4 X4 and I am having‎CAD operation - ‎CAD alternatives - ‎Hard Low range shift

    my 2001 ram will not engage into 4wd nor will 4 low. no light ...

    www.justanswer.com > Dodge

Feb 08, 2016 | Dodge Cars & Trucks

1 Answer

2001 dodge ram 1500 will not go into four wheel drive


About 1,160,000 results (0.62 seconds) Search Results

    Dodge Ram 1500 Questions - 4WD not engaging all the ...

    www.cargurus.com > Questions > Dodge > Ram 1500

    CarGurusAsked by mudslingin Oct 18, 2013 at 01:00 PM about the 2001 Dodge Ram 1500 ... to get it into 4LOW is to 1st get it into HI and then stop and shift it into LOW. What's ... I have a 98 Dodge Ram 1500 that I can not get the 4 wheel drive to engage. ... what web site can i go to so i can see how the inside looks on timing gears.

    NEED HELP! DODGE WONT GO INTO 4x4 SNOWS FALLING [Archive ...

    www.plowsite.com > ... > Commercial Snow Removal

    Jan 22, 2005 - 23 posts - ‎14 authors
    My 1997 dodge ram 2500 wont go into 4x4. I shift the transfer ... Because on mydodge the light doesnt come on in 4 wheel drive sometimes.

    Diagnosing 4WD Engagement Problems on Dodge Ram ...

    dodgeram.org/tech/repair/4X4/4x4_engagment.htm
    Nov 1, 2000 - This shift will be easier if you momentarily release the accelerator pedal. Apply a ... Do not attempt to shift to or from 4L while transmission is in gear or clutch is engaged. ... OK, now when you shift into 4WD it gets a little more complicated. .... I have a 97 RAM 1500 Club Cab Sport 4 X4 and I am having‎CAD operation - ‎CAD alternatives - ‎Hard Low range shift

    my 2001 ram will not engage into 4wd nor will 4 low. no light ...

    www.justanswer.com > Dodge

Feb 08, 2016 | Dodge Cars & Trucks

1 Answer

How to remove transmission from a 1997 chevy suburban 4x4


Jack up and block under the front wheels about a foot off the ground Go underneath and remove the rear transmission mount cross bar and drive shaft lower down the transmission enough to get at the bell housing mount bolts Remove them and the 4 torque mount bolts use a floor jack and roll the trany back and out

May 22, 2015 | 1997 Chevrolet Suburban

1 Answer

Transmission not wanting to shift out


Sometimes if you got a transmission that don't match the computer that controls it, you get this kind of problem. For example if you got a differenty year model from the original.

May 13, 2010 | 1997 Dodge Ram

1 Answer

How do you remove the front drive shaft in a 1999 Chevy 1/2 ton 4X4?


Jack up front end, and put on stands. Remove wheel. Remove large nut on end of drive shaft. Remove lower control arm, from wheel hub bearing assm.
Push drive shaft back toward transmission.
Now that drive shaft is free, you must "pop" it out of transmission output.
You can use a pry bar, but be careful not to damage anything.

Apr 15, 2010 | 1999 Chevrolet Silverado 1500

2 Answers

What transmission is in a 1997 dodge ram 1500 with a 360


If it is 2 wheel drive, than it is a 238-2 tranny

- 42RE with the 3.9L V6
- 46RE with the 5.2L and 5.9L V8
- 47RE with the 8.0L V10 and 5.9L Cummins diesel

(238 is the cubic inch displacement of the 3.9L V6.)

Sep 16, 2009 | 1997 Dodge Ram 1500 Club Cab

2 Answers

1997 z71 Transmission removal




  1. Disconnect the battery negative cable.
  2. Raise the vehicle. Support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  3. Disconnect the range selector cable from the transmission bracket and from the transmission range select lever. Refer to Shift Cable Replacement .
  4. Remove the rear propeller shaft. Refer to Rear Propeller Shaft in Propeller Shaft.
  5. Support the transmission with a transmission jack.
  6. Remove the transfer case if equipped. Refer to the appropriate Transfer Case Replacement in Transfer Case:
  7. Transfer Case Replacement (Selectable Four Wheel Drive) . • Transfer Case Replacement (Auto Four Wheel Drive ) . • Transfer Case Replacement (Manual Four Wheel Drive) .
    102329.gif
    tif.gif
  8. Gasoline Engine--Remove the following components:
  9. 7.1. Two bolts 7.2. Two washers 7.3. One nut 7.4. The transmission to engine brace
    102332.gif
    tif.gif
  10. Diesel Engine--Remove the following components:
  11. 8.1. Two bolts 8.2. Two washers 8.3. One nut 8.4. The transmission to engine brace
  12. Remove the transmission rear mount.
  13. Remove the frame crossmember.
  14. Remove the exhaust pipe from the exhaust manifolds. Remove the muffler assembly from the exhaust pipe, if required. Refer to Exhaust System.

  15. 102208.gif
    tif.gif
  16. For the 5.0L Gasoline Engine: Remove the six bolts securing the converter cover to the transmission.
  17. Remove the starter. Refer to Starter Replacement in Engine Electrical.
  18. For the 4.3L Gasoline Engine: Remove the dust plug at the end of the starter mounting port in order to gain access to the converter bolts.

  19. 102335.gif
    tif.gif
  20. For the Diesel Engine and 7.4L/5.7L Engines: Remove the four bolts securing the converter cover to the transmission.
  21. Mark the flywheel and the torque converter alignment.

  22. 102211.gif
    tif.gif
  23. Remove the bolts that attach the torque converter to the engine flywheel.

  24. 102339.gif
    tif.gif
  25. Remove the transmission vent hose.
  26. Disconnect the wiring harness connectors from the vehicle speed sensors and from the park neutral position switch.
  27. Remove all vehicle electrical harness wires, harness clips, tubes, and brackets that may interfere with the removal of the transmission.
  28. Remove the fluid fill tube and the fill tube seal from the transmission. Refer to Filler Tube Replacement .
  29. Plug the fluid fill tube opening in the transmission.
  30. Disconnect the transmission oil cooler pipes from the transmission. Refer to the oil cooler pipe quick connect fittings removal procedure in Oil Cooler Hose/Pipe Replacement .
  31. Plug the transmission oil cooler pipe connectors in the transmission case.
  32. Install the J 21366 in order to keep the torque converter from sliding off of the transmission turbine shaft.
  33. Support the engine with a suitable jack stand before removing the transmission from the engine.

  34. 102341.gif
    tif.gif
  35. 5.0L and 5.7L Gasoline Engine: Remove the studs and bolts securing the transmission to the engine.

  36. 102343.gif
    tif.gif
  37. 4.3L Gasoline Engine: Remove the studs and bolts securing the transmission to the engine.
  38. Pull the transmission straight back from the engine.
  39. Lower the transmission using the transmission jack.
  40. Flush the transmission oil cooler and the pipes whenever you remove the transmission for overhaul, or replacement of the torque converter, the pump, or the transmission case. Refer to Transmission Fluid Cooler Flushing .
  41. Clean the transmission case using a solvent dampened cloth. Do not allow solvent to enter the transmission.
  42. Air dry the transmission.
  43. Clean all hardware and the flywheel cover using solvent. Air dry all the parts.
  44. Inspect all the components for wear and damage.
  45. Inspect all the seals and the fittings for signs of wear.
  46. Inspect the torque converter for stripped or broken weld nuts.
  47. Inspect the transmission case for cracks.

Jul 06, 2009 | 1997 Chevrolet K1500

1 Answer

Transmission swap


yup, the motor and drive train are the same... if the wheel base is the same between the two trucks, than you can also use the drive shaft from it too

Feb 27, 2009 | 1996 Chevrolet K1500

1 Answer

Can't figure how to remove transmission


Remove shift linkage or shifter, Remove drive shaft, remove cross-member and mount, disconnect any electrical wiring and speedo cable if so equipped, Remove all bell housing bolts and slide transmission out. Use a trans jack or if you have to, 2 people can pull it by hand. Just reverse removal steps to reinstall.

Dec 27, 2008 | 1997 Chevrolet K1500

2 Answers

1997 chevy tahoe 4 wheel drive transmission


Needs rebuilt converter is bad, a progressive problem that caused overheating most likely. www.TransmissionGarage.com

Jul 14, 2008 | 1997 Chevrolet Tahoe

Not finding what you are looking for?
1999 Chevrolet Silverado 1500 Logo

Related Topics:

458 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...