Question about 1996 Jeep Grand Cherokee

1 Answer

Engine Immobilser Where is the engine immobiliser found in a 1996 Grand Jeep Cherokee? Auto Electrician believes car not starting because of this, but can't find the switch.

Posted by on

  • Anonymous Mar 12, 2014

    i had car fixed so the immobiliser would be bypassed but now car wont start

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

I have a 1996 Jeep Grand Cherokee 6 cylinder. You might want to check the Ignition Off Draw (IOD) fuse in the Electrical Power Distribution center located in the black box located just in front of the coolant fill container on the left side under the hood. This is a 40 amp fuse, orange in color and is the orange fuse closest to the firewall. This fuse is used to put the jeep in storage if you don't plan to drive it for a while. Which would stop the current flow and not allow your battery to die. GOOD LUCK!

Posted on Dec 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Which is the correct alternator,and total amps for jeep grand cherokee 2001, 4.0 engine ?


Check this out at an accredited auto electrician specialist shop as the amperage rating for the alternator will depend on what the system need and what extra amps are required for any electrical item that has been added to the vehicle (sound systemr, spot lights, fog lights etc)

Sep 28, 2014 | 2001 Jeep Grand Cherokee

1 Answer

Immobilizer light stays on engine won't start


Make sure the key isn't on a keyring, and if you have a spare key try holding it against the ignition barrel whilst trying to start the car. Failing that, it's an auto electrician job. China OBD2 car diagnostic tools wholesale on CareUCar

Mar 20, 2014 | 1996 Jeep Grand Cherokee

1 Answer

Engine Immobilser disconnect ZJ -97


We have information on factory installed system only.

Oct 17, 2012 | 1996 Jeep Grand Cherokee

1 Answer

19996 honda civic immobilser packing in engine management light on car will not start


go to this web to reset :http://www.ehow.com/how_7492453_reset-grand-cherokee-reset-antitheft.html

God bless you

Jun 09, 2012 | 1996 Honda Civic

1 Answer

Hi i have grand cherokee 2001 the battery is dead i replaced it but the engine wont start could it be because of the alarm and if so how do i reset it?thank you


try the unlock button on the keyring to disable the immobilser it worked on my dad's 1996 grand cherokee today. We have found this car has lots of electrical issues aleted to the immobilser. or fuses in the immobilser

Feb 28, 2011 | 2001 Jeep Grand Cherokee

1 Answer

Where is the immobilser located on my 1996 jeep grand cherokee ltd edition? And can it be bypassed or disabled?


It is located behind the glove box. you must take off the glove box door, and then the plastic bottom of the glove box..

may i ask why you want to disable it?

Jan 08, 2011 | 1996 Jeep Grand Cherokee

1 Answer

1994 Grand Cherokee: engine will not run. starts up then cuts off-solve...


try using your spare key,or replacing batteries in remotes and reseting alarm system.....(this is a symptom of the immobiliser working as it should)

May 17, 2010 | 1994 Jeep Grand Cherokee

2 Answers

1996 Grand Jeep Cherokee Immobilser/key fob problem


goldie try to lock and unlock the passenger door...there are disarm switches in both doors...the drivers side may have failed but the passenger side may still work...if that dont do it you may need a dealer because the module for the remote keyless entry may have faied

Nov 13, 2008 | 1995 Jeep Grand Cherokee

3 Answers

1996 Jeep Grand Cherokee - Will Not Start or Run


they have crankshaft sencers on the transmission on jeeps. it would be up high on the drivers side on front of transmission. they will cause it to not get fuel or fire and can run then quit.

Jul 19, 2008 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
1996 Jeep Grand Cherokee Logo

Related Topics:

648 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...