Question about 1994 Ford Taurus

1 Answer

94 ford taurus electrical prob.

Keyless door locks open close reptively driers door wont unlock half to disconnect battery how to disable key less locks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

In the trunk on the trunk mount support there should a sticker with the original keyless code number, reinstall this number into your system and try it. The original number will reset the system.

Posted on Jul 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to take automate car alarm off silent mode


{: ) When armed, the content theft deterrent (CTD) system is designed to deter vehicle content theft by pulsing the horns and exterior lamps for approximately 30 seconds when an unauthorized vehicle entry is detected.

An unauthorized entry can be any of the following with the CTD system armed:
• When any door is opened without first being unlocked using the keyless entry transmitter • After a battery reconnect, if the battery was disconnected with the CTD system armed
Disarming an Armed System/Silencing an Alarm
If system arming has been requested by the power door lock switch or the keyless entry transmitter, it must be disarmed.
Important: Using the power door unlock switch or manually unlocking the doors does not disable the content theft deterrent (CTD) arm mode. Also, disconnecting the battery or pulling fuses does not disable the arm mode, since the BCM stores the CTD mode status in memory.
• To disarm the CTD system in standby mode, perform one of the following: - Press the UNLOCK button on the keyless entry transmitter. - Insert a valid key into the ignition and switch to the ON position. • To disarm the CTD system in the armed mode (non-event) or when activated (during an alarm event): - Press the UNLOCK button on the keyless entry transmitter. - Insert a valid key into the ignition and switch to the ON position Locking the Vehicle Without Arming the CTD System Locking the vehicle may be accomplished without arming the content theft deterrent (CTD) system. Use of the manual door locks or using the key to lock the doors will lock the vehicle, but will not arm the CTD system.

Apr 23, 2011 | 2007 Chevrolet Tahoe

3 Answers

The battery is dead on my 2008 Ford Taurus X, the doors are locked and my keys won't unlock the door. Any help you can give me would be greatly appreciated. I've already tried the key less entry. That is...


I hate the way they have incorporated these new alarm systems so that you cant open the doors when the battery is dead, some cars will lock you inside unable to open door from inside. The electric door locks are what is keeping you from being able to unlock doors. Some people go to Auto Zone and rent the tool that can be slid into the door by way of the window opening, this doesn't always work. the best way to get in is to go under the car with a set of jumper cables and charge the battery from the large battery cable that is connected to the starter.. charge battery enough to access door locks P.s. it wont take much power to use key to unlock door after the battery has a small charge..

Mar 23, 2011 | 2008 Ford Taurus X

1 Answer

I have a 2008 ford fusion along with 2002 ford taurus. Just for the testing purposes I was trying to program the taurus keyless remote into the fusion, and now the single keyless remote is working on both...


cycle your ignition 8 times on and off really fast then on the eight time you cycle the door locks should lock and unlock,then hit the lock and unlock button on your fob that should set it just for one car. if you try to reset the fusion key your dealer will charge you alot of money

Sep 26, 2010 | 2008 Ford Fusion

2 Answers

1996 Explorer anti-theft system won't disable The anti-theft system on my 1996 Ford Explorer will not not turn-off with any normal method. Electronic keypad unlock on driver's door will not disable,...


Try re-setting the computer...Disconnect the negative terminal of the battery and leave off for 5-10 minutes. This will allow the computer to reset. The charger may have interupted the signal or something.

Mar 11, 2010 | 1996 Ford Explorer

1 Answer

How do I program remote to unlock the doors of 2002 ford taurus?


Come on chat wherein you can stand close to the car while I guide you.

I am Murphybanton.

I am online now.

Oct 05, 2009 | 2002 Ford Taurus

1 Answer

Ford 2000 Taurus, Keyless entry remote no longer works. Changed battery no luck. Tried reprograming and found door locks did not cycle open closed. Could not go further. Any ideas? Thanks, Al


I have a 2000 ford Taurus and my keyless remote has stopped working and having problems with key unlocking the door from outside, none of the remote work do u have any idea what my problem could be ?

Jul 30, 2009 | Ford Taurus Cars & Trucks

1 Answer

Keyless entry on honda civic 2006 not working


The keyless entry is designed to work with the doors closed (closed - not locked). If the door ajar sensor thinks the door is open the keyless entry is disabled. When you manually lock the door it might tighten the door just enough to activate the keyless entry. I would try slamming all the doors closed and then see if the keyless entry works. If it still wont work have the wiring checked on the front door lock.

May 12, 2009 | 2006 Honda Civic Hybrid

2 Answers

Need to reset the key fob


Sit in the driver's seat
Close all vehicle doors; ignition key should NOT be in the ignition, and ignition should be OFF.
Press and hold UNLOCK on your driver's door lock switch, insert and remove your ignition key TWICE, and insert the key in the ignition; this time LEAVE IT. DO NOT TURN THE KEY!!
LET GO OF THE DOOR SWITCH; listen for 3 dings after which, with the key still in the ignition, you will press and hold both LOCK and UNLOCK AT THE SAME TIME on your transmitter for 12 seconds. or until you hear 2 DINGS which indicate a newly programmed transmitter.

If you wish to use more the one transmitter (4 MAX), press and hold lock and unlock just as the first transmitter.

PULLING OUT THE IGNITION KEY ends this procedure :-) !

May 01, 2009 | 1998 Buick Century

1 Answer

My car is acting crazy!


" turn the key on engine off 8 times. the doors will lock and unlock. push one of the buttons on the key fob and the doors will lock and unlock. do this for each remote that you have. when you are done turn the key off. the door locks will lock and unlock. the remote fob should work after this."
From My SecuriLock..

Sep 05, 2008 | 2006 Ford Taurus

6 Answers

Keyless entry stopped working on 05 cobalt now i have to unlock door with the key and when i do that the alarm goes off. Help


Lock all the doors from the inside (with all the doors closed), unlock your driver's door by manually lifting the lock, then press it back down after you are out - this will prevent the alarm from sounding when you use the key to unlock the door.

Aug 02, 2008 | 2007 Chevrolet Cobalt Coupe

Not finding what you are looking for?
1994 Ford Taurus Logo

Related Topics:

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...