Question about 2001 Ford Crown Victoria

3 Answers

Headlights quit working on my 2001 Ford Crown Victoria Police Int

The Headlights just quit working on My Crown Victoria Police Intersepter. You can hold back on turn signal arm and headlights will come on. Please can someone tell me what is wrong with it.

Posted by on

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Ford Expert
  • 93 Answers

If you have a 1999-2011 Mercury Marquis, Mercury Marauder, or Crown Victoria, and your headlights and or tail lights don\'t work, Ford just finally extended the warranty on your LCM (Lighting Control Module) for free - both parts and labor and will install a new one for free! Ford has extended the warranty to 15yrs/250,000. Must be done at Ford and the fix is free. Call your local Ford Dealer and tell them you need to make an appointment because your lights don\'t work and Ford has extended your warranty on the LCM. Tell them it is the Customer Satisfaction Program 14N01. Have your Vin number ready as they will ask for it. If they act ****** ask to talk to the manager or tell them to call Ford Motor Company and ask them or you can call Ford yourself. We just had ours done on 8-12-14 in Scottsdale, AZ. If you have a 99 you better get there before Oct. 14th, 2014 as it is a 15 year warranty.

Posted on Aug 28, 2014

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I'm having the same problem but its my head lights signal lights and interia light

Posted on Jul 15, 2013

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 290 Answers

It needs a new headlight switch assembly. A parts worn out inside. The approx. cost for a new one is abot $160.00. Sorry.

Posted on Dec 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my 2007 Crown Victoria Police Interceptor vibrate when I get to 40 miles an hour and then die off back to normal by the time it reaches 50


Ford Crown Victoria Questions - what would cause a whole ...

www.cargurus.com > Questions > Ford > Crown Victoria
CarGuruswhat would cause a whole car vibration when going between 48 and 65 mph, even ... Asked by Dfranz Aug 29, 2013 at 11:53 AM about the 2001 Ford Crown Victoria Police Interceptor ... You have an open diff by turning one wheel the driveshaft should turn before the .... 2007 Ford Crown Victoria Police Interceptor For Sale.

Nov 03, 2015 | Cars & Trucks

1 Answer

Water pump failed. Car overheated. Engine lost power. Car smoke out from back of engine and from rear of car. I replaced water pump. Car still smokes when I drive it. Still has no power.


Notorious for intake leaks, the composite plastic intakes crack and leak coolant-as to the lack of power, you mght have overheated it and done some damage to the engine. There was a recall (information below) for the 4.6 for the intake-the overheating and lack of power means you should at least have compression checked and go from there-you may have bad head gaskets or worse. Do a compression test before you do anything else.

Ford Motor Company will extend the recall (01M02) on 4.6L V8 equipped vehicles with plastic intake manifolds. Some of the composite intake manifolds used on 4.6L SOHC engines may develop fatigue cracks at the coolant crossover duct. This condition could result in engine coolant leakage which, if not serviced, may cause engine overheating. Complete loss of coolant may result in engine damage or engine failure.
The updated recall now includes:
• Certain 1996 through 2001 Model Year Crown Victoria Police Interceptor
• Certain 1998 through 2001 Model Year Crown Victoria with Taxi
• Certain 1998 through 2001 Lincoln Town Car Limousine and Livery Prep Package
• Certain 1996-2001 Crown Victoria Taxis, Police cars and Lincoln Town Car Limousine and Livery cars.
• Certain 1996 through 1997 Crown Victoria Police Interceptor Vehicles with 4.6L SOHC engines built at the St. Thomas Assembly Plant from the beginning of production for the 1996 Model Year through January 28, 1997.
• Certain 1998 through 2001 Crown Victoria Police Interceptor Vehicles with 4.6L SOHC engines built at the St. Thomas Assembly Plant from November 22, 1997 through December 15, 2000.
• Certain 1998 through 2001 Crown Victoria Taxi Vehicles with 4.6L SOHC engines built at the St. Thomas Assembly Plant from November 22, 1997 through December 15, 2000.
• Certain 1998 through 2001 Lincoln Town Car Limousine Prep Package and Livery Vehicles with 4.6L SOHC engines built at the Wixom Assembly Plant from November 22, 1997 through December 15, 2000.

Sep 23, 2011 | 2001 Ford Crown Victoria

2 Answers

2005 police P71 4.6L crown victoria. headlights work fine. pull back on signal handle, the blue light on display illuminates, yet headlights are out. no illumination to high beams. pull on handle again,...


The head light controls on a police car are exactly like those on any other Crown Vic. I have repaired dozens of them. More than likely you have no contact inside the multifunction switch. I would replace the switch as the most likely source of the problem. These are easy to change, just remove both halves of the plastic cover around the steering column and there are two Torx (also called star screws) screws holding the switch onto the column. The screws are on the bottom down in wells of the lower calm shell cover, they are cross points (Phillips)
This is a fairly common failure on police cars (P71 and P73 option).

Aug 28, 2011 | 2004 Ford Crown Victoria

2 Answers

How do i get the codes for the check engine light?


request the codes from ford dealer and have alt tested. berrydalewolf

Oct 30, 2009 | 1995 Ford Crown Victoria

1 Answer

1999 crown vic police int. cylinder numbers.


Pass Side from front to back 1 2 3 4
Drive side 5 6 7 8
all front to back

Mar 09, 2009 | 1998 Ford Crown Victoria

2 Answers

2004 and 2001, are parts interchangeable?


Yes they are as long as the Motors are Similar.

Jan 22, 2009 | 2004 Ford Crown Victoria

Not finding what you are looking for?
2001 Ford Crown Victoria Logo

768 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...