- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Where can I get a lug nut key for my 99 VW Passat? Will my 2008 Jetta
have ... My rear brakes on my 1999 VW jetta are grooved into my rotter
so i cant slide ... 1999 Volkswagen Jetta Problem. okay i have a 1999
vw jetta new body style
the front and rear pads are very easy to replace although you do need a piston wind back tool to replace the rears,my concern is if you are having to ask this question you probally should not be fitting the pads being a safety related item you cannot take risks.my best and honest advice would be to get a mechanic to replace them for you.Sorry if you dont think i,m being helpfull but you cant take chances with brakes.cheers
To fix the E brake you have to take the cover off that surrounds the brake lever and behind it is a nut on a cable attached to two other cables with a single nut is your adjuster, tighten it up till the handle is about half way up to fully lock the rear wheels. If the adjuster is all the way back and still can't hold the car then your rear brakes are worn out, replace asap. As for your codes just call up any vdub dealer and ask them to tell you what the codes mean.
im sorry bro i find that you needing special tools a load of bs. i may be wrong but i really really doubt it. brakes are easy. first locate the caliper and there should be 2 bolts holding that tight. loosen the top bolt and then take out the lower bolt from the caliper. the old pads should just fall out. remove the master cylinder cap. (the jug with brake fluid in it.) compress the piston replace the old pads and push the claiper back down on the rotor. tighten bolts back up pump the brakes till hard with the car off and then repeat for the other side.
I replaced a brake light switch on 2005 Honda Odyssey. While driving, my brake locked. I have to stop the car and step on the brake several times to release the brake to continue to drive. What is the problem and it is easily to fix at home before I bring the car into the shop?
Hi, the light is on because of the leak in your brakes,the part that need to be replaced is call wheel cilinder ,just ask for it by the car year and model ,it should not be to expensive ,(twenty to fourty $) be sure you have the brakes bleed afther installig it.GoodLuck