Question about 1979 Chevrolet C/K 3500
Remove caliper and nut to axle should come of with a little help of a rubber hammer. Knock bolts out from the front and drive new ones in from the back. You can use a lugnut with the flat side down to help pull them in and a hammer to help. Hope this helps.
Posted on Dec 26, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: remove the front disc rotor
The rotor and hub assembly are held together by the studs,you must first remove the 4-wheel drive hub assembly,then the wheel bearing nuts,and pull the hub and rotor off as a unit. Next lay it(back down) on a piece of wood, using a drift punch drive the studs out. Turn it over ,lay it(face down) on a block of wood, line the new stud splines up with the grooves in the hub and drive them in with the punch and reassemble. A set of dentist style picks will be helpful with the clip in the 4wd hub and a 4 lug 4wd nut wrench will be needed.
Posted on Dec 27, 2008
Tips for a great answer:
Sep 10, 2014 | 1995 Chevrolet Lumina
Aug 06, 2013 | Cars & Trucks
Aug 05, 2011 | 1989 Isuzu Pickup 2WD
Oct 14, 2010 | 2001 Chevrolet Silverado
Jan 29, 2010 | 1998 Chevrolet S-10 Pickup
Oct 11, 2009 | 2001 Chevrolet Silverado
Aug 28, 2009 | 2000 Chevrolet Silverado 1500
Apr 18, 2009 | 2004 Chevrolet Silverado
Mar 16, 2009 | 1999 Chevrolet Silverado 1500
Dec 26, 2008 | 1979 Chevrolet C/K 3500
917 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: