Tail lights won't work

Question 1

0helpful

1answer

2000 Chrysler Town & Country Tail lights and dash lights won't work

If the brake lights and turn signal lights work, then there may be a bad fuse. Check the fuse box.

Mar 21, 2013 • Chrysler Town and Country Cars & Trucks

1helpful

2answers

2006 pt cruiser head and tail lights won't come on

Sounds like a fuse problem. Find the fuse box for the lights and replace the one that is for head &tail lights

Feb 08, 2013 • Cars & Trucks

0helpful

2answers

My tail lights on my 1999 chevy venture work when they won't to and I think it's a ground short.. But I don't know where to look for it!

get a wiring diagram, follow this circuit, wire by wire, start @ rear, your tail lights, check each bulb, then proceed to front, along frame rail, to switch & fuse block. test for continuity & shorts, bad wires, corrosion, etc

Jan 18, 2013 • Cars & Trucks

0helpful

1answer

Cargo light won't come on when I open the tail gate like it's supposed to. I have replace the bulb and it still won't work. Maybe a fuse? But I have not Idea which one.

try checkin the ground wire .......

Jul 07, 2012 • 2005 Chevrolet Avalanche

0helpful

1answer

1997 Ford E350 clearance lights don't work

First check the fuse, the clearance lights are not factory in most cases and the wiring gets shorted from poor wiring. Once you replace the fuse see if the lights come on, if the fuse blows right away find the wiring to the clearance lights and disconnect them, if the short goes away it is a I said the wiring is shorted. If you don't have the owner's manual you should be able to download it at the link provided. It should be fuse #10 a 20 AMP in the interior fuse box. http://www.fordservicecontent.com/Ford_Content/catalog/owner_guides/97ecoog1e.pdf

May 05, 2017 • Cars & Trucks

1helpful

2answers

My tail light fuse on my92 s-10 just keeps on blowin and when it blows my tail lights and my inside dash lights doint work, howcome it would b doin that??

Check your tail light and other running light sockets for corrosion.
Pull each and every bulb to check it, also check the back side of the socket.
(Your headlights are not part of this circuit.)
Rust or water with rust will conduct enough current to blow the fuses.
Please revert back to the 20 amp fuse, as you may damage the wires leading to the bulbs in places you won't be able to find or fix.
It's unlikely that it's one of the actual light bulbs, all light bulbs tend to go open instead of shorted, but you can check them too.

May 31, 2012 • Cars & Trucks

2helpful

1answer

Brake light dodge neon 2002

Check the brake fuse in your dash's fusebox. Since the turns work, you know the bulbs are good, unless your Neon has separate brake lights. If the fuse is good, bulbs are good, then check for power at the brake light switch on the upper portion of the brake pedal. Should have 12 volts there all the time. Use a testlight or voltmeter to check. Good luck.

Nov 19, 2011 • 2002 Dodge Neon

2helpful

2answers

Dash lights won't come on

Turn the headloights on and see if the tail lights work, if not check the fuse inside at the left lower dash under the cover, check the fuse marked "tail", the tail lights are working then the problem may be the rheostat switch, make sure it's turned to the brightest setting, if the dash lites still don't work let me know.

Aug 27, 2011 • 1993 Toyota Camry V6

0helpful

2answers

Tail light doesnt turn on with headlights but works fine as a break light and turn signal, why?

in the rear lights you may have two bulbs one is the turn signal the other one is stop light / tail light the stop light / tail light has two filaments, one for the stop light (21 watt) & one for the tail light (5 watt) it is possible that the tail light filament is blown, try replacing the bulb to see if that fixes the problem,also check all the fuses as well.......hope this helps......cheers.

Aug 15, 2011 • 1994 Cadillac DeVille

0helpful

1answer