Question about 1995 Pontiac Grand Am

1 Answer

Need help changing the serpentine belt on a 1995 grand am "pontiac"

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I had to do this several years back and mind you it is not as easy as I would have thought. You will need to position a jack under the engine to support it because you will have to jack the engine up slightly and completely remove the upper motor mount on the right side to be able to route the belt through the pulleys properly. also if you wish the inner fender well could be removed to help access but you will have to remove the motor mount. Mine is a 1995 grand am gt with the 3.1 v-6. Hope this helps.

Posted on Jan 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Serpintine Belt Routing


Check this on Model GRAND AM, Engine V6 3.1L 189ci GAS FI N M...

3_30_2012_1_30_34_pm.jpg

Hope helps.

Mar 30, 2012 | 1995 Pontiac Grand Am

1 Answer

Serpentine belt diagram


CLICK on the following LINK. It has all the Diagrams for your Serpentine Belt that you will need.
If you would: Before Clicking let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Thanks!

http://www.2carpros.com/car_repair_information/year/1995/make/pontiac/model/bonneville/1995_pontiac_bonneville_drive_belt_routing_diagram.htm

Feb 14, 2010 | 1995 Pontiac Bonneville

1 Answer

Pontiac quad serpentine belt diagram


if you buy your belt at Autozone the belt routing is on the package

Jan 19, 2010 | 1995 Pontiac Grand Am

1 Answer

I need a diagram for changing a serpentine belt on a 2006 grand prix of some kind of information to help me with the putting the belt back on


2006 PONTIAC GRAND PRIX - V6 3.8L
Belt Routing Diagram - Multiple Accessory (Main Drive)

cff7db4.jpg

Hope helps (remember rated this) Good luck.

Jan 15, 2010 | 2006 Pontiac Grand Prix

1 Answer

How do you adjust or relieve tension on a serpentine belt on a 1995 pontiac grand am?


you cannot adjust tension. but you can relieve to change the belt. it will be a square hole on the tension arm. a 3/8 drive ratchet will do the job. i have seen some that require a wrench on the pulley nut.

Nov 11, 2009 | 1995 Pontiac Grand Am

1 Answer

How difficult is it to change the serpentine belt tension assembly on the 1995 pontiac grand am with the V6? Does the engine need to raised out of the vehicle?


the engine does not have to be raised
.you need a serpentine tool.it is a flat bar with hex cut outs for the pulley.or a shallow socket and ratchet.
the tensioner need to be slack to put on the new belt. draw a diagram of the belt routing of the old belt. the crankshaft is easier put on from the bottom.there is not alot of space and the belt has to be twisted sideways past a few pulleys.

Oct 23, 2009 | 1997 Pontiac Grand Am

2 Answers

Changing serpentine belt 3.8 2007 pontiac grand


  • Make sure your new belt exactly matches the old belt demensions
  • Take a breaker bar or big rachet & release the tension on the automatic tensioner; very slowly
  • Loop the old belt around the pulleys & fan
  • Install new

Oct 17, 2009 | 2007 Pontiac Grand Prix GXP Sedan

Not finding what you are looking for?
1995 Pontiac Grand Am Logo

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...